Pilot line for European Production of PEROvskite-Silicon taNdem modules on Industrial scale

Información del proyecto

PEPPERONI

Identificador del acuerdo de subvención: 101084251

DOI

10.3030/101084251

Fecha de la firma de la CE 20 Octubre 2022

Fecha de inicio 1 Noviembre 2022

Fecha de finalización 31 Octubre 2026

Financiado con arreglo a

• Climate, Energy and Mobility

Coste total

€ 17 020 325,00

Aportación de la UE

€ 12 950 825,00

Coordinado por

HELMHOLTZ-ZENTRUM BERLIN FUR MATERIALIEN UND ENERGIE GMBH
Germany

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (2)

Eco-design report

This deliverable is a report that summarises the work in and the results of the first subtask of Task 8.2 on a preliminary LCA analysis to support an eco-design, i.e., to find ways of producing materials, cells and modules with the lowest impact on the environment. The report will become publicly available. This deliverable originates from Task 8.2.

"Recycling possibilities, ""zero-waste"" target, emissions assessment, and hazardousness classification of used PV panels"

This deliverable is a report that summarises the work in and results of Task 8.3. The report will become publicly available. This deliverable originates from Task 8.3.

Websites, patent fillings, videos etc. (1)

PEPPERONI Website

The actual deliverable is the publicly available online presence of the project website. A brief report will be submitted that summarises the creation of the website and plans for further maintenance, updates and expansion of the website. This deliverable originates from Task 9.2.

Publicaciones

Peer reviewed articles (7)

60 cm2 perovskite-silicon tandem solar cells with an efficiency of 28.9% by homogeneous passivation

Autores: Kerem Artuk, Aleksandra Oranskaia, Deniz Turkay, Felipe Saenz, Mounir D. Mensi, Michele De Bastiani, Andrés-Felipe Castro-Méndez, Julien Hurni, Christophe Allebé, Mostafa Othman, Lisa Champault, Austin G. Kuba, Alexandra Levtchenko, Daniel A. Jacobs, Jean-Baptiste Puel, Daniel Ory, Felix Lang, Aïcha Hessler-Wyser, Udo Schwingenschlogl, Quentin Jeangros, Christophe Ballif, Christian M. Wolff
Publicado en: Nature Communications, Edición 16, 2025, ISSN 2041-1723
Editor: Springer Science and Business Media LLC
DOI: 10.1038/S41467-025-63673-Y

What Is a Polyolefin? A Critical Overview of Ethylene Copolymers Used as Solar Photovoltaic Module Encapsulants

Autores: Gernot Oreski, Chiara Barretta, Petra Christöfl, Paul Gebhardt, Karl‐Anders Weiß, David C. Miller, Soňa Uličná, Michael Kempe, Laura S. Bruckman, Alessandro Virtuani, Hengyu Li, Brian Habersber
Publicado en: Progress in Photovoltaics: Research and Applications, 2025, ISSN 1062-7995
Editor: Wiley
DOI: 10.1002/PIP.70038

Seasonality in Perovskite Solar Cells: Insights from 4 Years of Outdoor Data

Autores: Marko Remec, Mark Khenkin, Ulas Erdil, Quiterie Emery, Gopinath Paramasivam, Eva Unger, Rutger Schlatmann, Steve Albrecht, Marko Topič, Carolin Ulbrich
Publicado en: Advanced Energy Materials, Edición 15, 2025, ISSN 1614-6832
Editor: Wiley
DOI: 10.1002/AENM.202501906

Mimicking Outdoor Ion Migration in Perovskite Solar Cells: A Forward Bias, No-Light Accelerated Aging Approach

Autores: Ulas Erdil; Mark Khenkin; Marko Remec; Quiterie Emery; Vediappan Sudhakar; Rutger Schlatmann; Antonio Abate; Eugene A. Katz; Carolin Ulbrich
Publicado en: ACS Energy Letters, Edición 10, 2025, ISSN 1529-1537
Editor: American Chemical Society
DOI: 10.1021/ACSENERGYLETT.5C00376

Sequentially Evaporated Wide Bandgap Perovskite Absorber for Large‐Area and Reproducible Fabrication of Solar Cells

Autores: Arman Mahboubi Soufiani, Hajar Moumine, Erik Wutke, Guillermo A. Farias Basulto, Wander Max Bernardes de Araujo, Matthew Leyden, Mateusz Szot, Tobias Bertram, Viktor Škorjanc, Angelika Harter, Stefanie Severin, Marcel Roß, Roland Mainz, Rutger Schlatmann, Steve Albrecht, Bernd Stannowski, Jona Kurpiers
Publicado en: Solar RRL, Edición 9, 2025, ISSN 2367-198X
Editor: Wiley
DOI: 10.1002/SOLR.202500412

Facile and Low‐Cost Design Alternative of Spiro‐OMeTAD as p‐Type Semiconductor for Efficient Perovskite Solar Cells

Autores: Daskeviciute, Sarune; Zhang, Yi; Daskeviciene, Maryte; Rakstys, Kasparas; Petrulevicius, Julius; Jankauskas, Vygintas; Getautis, Vytautas; Nazeeruddin, Mohammad Khaja
Publicado en: Solar RRL, Edición 9, 2025, ISSN 2367-198X
Editor: Wiley-VCH GmbH
DOI: 10.1002/SOLR.202500034

Tips and Tricks for a Good Encapsulation for Perovskite‐Based Solar Cells

Autores: Quiterie Emery, Lea Dagault, Mark Khenkin, Nikoleta Kyranaki, Wander Max Bernardes de Araújo, Ulas Erdil, Matthias Demuylder, Stephane Cros, Rutger Schlatmann, Bernd Stannowski, Carolin Ulbrich
Publicado en: Progress in Photovoltaics: Research and Applications, Edición 33, 2025, ISSN 1062-7995
Editor: Wiley
DOI: 10.1002/PIP.3888