FULLY RECYCLABLE HYBRID BIO-COMPOSITE FOR TRANSPORT APPLICATIONS

Información del proyecto

FURHY

Identificador del acuerdo de subvención: 101091828

DOI

10.3030/101091828

Fecha de la firma de la CE 7 Septiembre 2023

Fecha de inicio 1 Julio 2023

Fecha de finalización 31 Diciembre 2026

Financiado con arreglo a

• Digital, Industry and Space

Coste total

€ 3 860 178,50

Aportación de la UE

€ 3 860 178,50

Coordinado por

CENTRO DI RICERCHE EUROPEO DI TECNOLOGIE DESIGN E MATERIALI
Italy

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (4)

FURHY Communication and Dissemination Plan

FURHY Communication and Dissemination Plan.

Technical datasheet of the new prepreg

Technical datasheet of the new prepreg, obtained by hot-melt process, comprising the three typologies of reinforcing fibers (hybrid rCF/hemp non-woven, rCF non-woven, hemp fabric).

Specification sheet and requirements

Report on specification sheet and requirements.

Technical datasheet of the hybrid rCF/hemp non-wo

Technical datasheet of the hybrid rCF/hemp non-woven.

Data Management Plan (1)

Data management plan V1

Report on the way data is generated, collected, and handled during the project.

Publicaciones

Peer reviewed articles (7)

Chemical Recycling of Bio-Based Thermosetting Epoxy Composite Produced by Vacuum-Assisted Resin Infusion Process

Autores: Liberata Guadagno; Raffaele Longo; Marialuigia Raimondo; Luigi Vertuccio; Francesca Aliberti; Lorenzo Bonadies; Simone Morciano; Luigia Longo; Roberto Pantani; Elisa Calabrese
Publicado en: Polymers, 2025, ISSN 2073-4360
Editor: MDPI — Multidisciplinary Digital Publishing Institute
DOI: 10.3390/POLYM17091241

Thermal, Mechanical, Morphological, and Piezoresistive Properties of Poly(ethylene-co-methacrylic acid) (EMAA) with Carbon Nanotubes and Expanded Graphite

Autores: Aliberti F.; Vertuccio L.; Longo R.; Sorrentino A.; Pantani R.; Guadagno L.; Raimondo M.
Publicado en: Nanomaterials, Edición Volume 15, Edición 13, 2025, ISSN 2079-4991
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.20944/PREPRINTS202505.0157.V1

Testing, Experimental Design and Numerical Analysis of Nano-Mechanical Properties in Epoxy Hybrid Systems Reinforced with Carbon Nanotubes and Graphene Nanoparticles

Autores: Giovanni Spinelli; Rosella Guarini; Todor Batakliev; Liberata Guadagno; Marialuigia Raimondo
Publicado en: Polymers, 2024, ISSN 2073-4360
Editor: MDPI — Multidisciplinary Digital Publishing Institute
DOI: 10.3390/POLYM16233420

Rheological Properties of Functionalized Smart Resins for Transport Applications

Autores: Giorgia De Piano; Raffaele Longo; Liberata Guadagno; Roberto Pantani
Publicado en: EASN 2024, 2025, ISSN 2673-4591
Editor: MDPI — Multidisciplinary Digital Publishing Institute
DOI: 10.3390/ENGPROC2025090006

Development of de-icing/self-sensing structural composites via controlled Joule heating curing

Autores: Liberata Guadagno, Luigi Vertuccio, Francesca Aliberti, Roberto Pantani, Marialuigia Raimondo, Michelina Catauro, Raffaele Longo
Publicado en: Composites Part B: Engineering, Edición 292, 2025, ISSN 1359-8368
Editor: Elsevier BV
DOI: 10.1016/J.COMPOSITESB.2024.112079

Experimental, Simulation and Theoretical Insights into Anisotropic Thermal Behavior of Epoxy Nanocomposites Reinforced with Carbonaceous Nanofillers

Autores: Giovanni Spinelli; Rosella Guarini; Liberata Guadagno; Carlo Naddeo; Luigi Vertuccio; Vittorio Romano
Publicado en: Polymers, 2025, ISSN 2073-4360
Editor: MDPI — Multidisciplinary Digital Publishing Institute
DOI: 10.3390/POLYM17091248

Adaptative electrothermal activation of hybrid composites for anti-icing function

Autores: Longo R.; Vertuccio L.; Aliberti F.; Raimondo M.; Pantani R.; Russo S.; Iannuzzo G.; Guadagno L.
Publicado en: Advanced Composites and Hybrid Materials, Edición 8, 268 (2025), 2025, ISSN 2522-0128
Editor: Springer
DOI: 10.1007/S42114-025-01349-3

Book chapters (1)

Electro-curing: Saving Energy for the Manufacturing of Structural Resins is Possible

Autores: Raffaele Longo, Luigi Vertuccio, Liberata Guadagno
Publicado en: Advances in Science, Technology & Innovation, Advances in Sustainable Building Materials, Design and Energy Systems, 2025
Editor: Springer Nature Switzerland
DOI: 10.1007/978-3-031-71914-1_11

Conference proceedings (2)

Manufacturing of bio-resin based composites

Autores: Lorenzo Bonadies, Alessandra Passaro, Luigia Longo, Simone Morciano, Elisa Calabrese, Francesca Aliberti, Raffaele Longo, Roberto Pantani, Liberata Guadagno
Publicado en: XLV National Conference on Calorimetry, Thermal Analysis and Applied Thermodynamics, Book of Abstract, 2024
Editor: AICAT 2024

Influence of carbon nanotubes on the electrical and thermal behavior of epoxy resin

Autores: Luigi Vertuccio, Marika Fiorentino, Michelina Catauro, Marialuigia Raimondo, Liberata Guadagno
Publicado en: XLV National Conference on Calorimetry, Thermal Analysis and Applied Thermodynamics, Book of Abstracts, 2024
Editor: AICAT 2024