Hydrogen Production in Pressurized 3D-Printed Solid Oxide Electrolysis Stacks

Información del proyecto

HyP3D

Identificador del acuerdo de subvención: 101101274

DOI

10.3030/101101274

Fecha de la firma de la CE 5 Diciembre 2022

Fecha de inicio 1 Enero 2023

Fecha de finalización 31 Diciembre 2026

Financiado con arreglo a

• Climate, Energy and Mobility

Coste total

€ 2 543 398,75

Aportación de la UE

€ 2 543 398,75

Coordinado por

FUNDACIO INSTITUT DE RECERCA EN ENERGIA DE CATALUNYA
Spain

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (3)

HyP3D system integration and operation for P2G and HRS
Annual data reporting - March 2024

Annual data reporting - March 2024For the purpose of monitoring technology progress against state-of-art, but also to identify how each of the projects contributes to the Clean Hydrogen JU targets, objectives and indicators described in the SRIA, supported projects shall report directly or indirectly on an annual basis (e.g via a secure online data collection platform) managed by the Clean Hydrogen Joint Undertaking throughout the duration of Horizon Europe.The project will need to submit all information included the questionnaire(s), unless they request and receive an exception from the Programme Office. The information is submitted by default as public, but the projects can request for certain fields to be considered as “confidential” except for the fields that constitute or directly inform KPIs of the Clean Hydrogen JU.

Overall project concept revision and initial specifications

Data Management Plan (1)

Data Management Plan

Data Management Plan - the DMP will be updated regularly as necessary

Publicaciones

Peer reviewed articles (5)

3D printing of reversible solid oxide cell stacks for efficient hydrogen production and power generation

Autores: A.M. Martos, S. Márquez, R.S. Pavlov, W. Zambelli, S. Anelli, M. Nuñez, L. Bernadet, J.J. Brey, M. Torrell, A. Tarancón
Publicado en: Journal of power sources, 2024, ISSN 1873-2755
Editor: Elsevier
DOI: 10.1016/j.jpowsour.2024.234704

3D printed electrolyte-supported solid oxide cells based on Ytterbium-doped scandia-stabilized zirconia

Autores: Santiago Márquez, Simone Anelli, Marc Nuñez, Maritta Lira, Antonio Maria Asensio, Marc Torrell and Albert Tarancón
Publicado en: Journal of Physics: Energy, 2024, ISSN 2515-7655
Editor: [Bristol]: IOP Publishing Ltd, 2019-
DOI: 10.1088/2515-7655/ad17e3

Laser processing of Crofer22APU and 3YSZ: an interlocking approach for improved interfaces with glass-based seals in solid oxide electrolysers

Autores: F. D'Isanto, S. Anelli, F. Puleo, M. Salvo, D.M.N. Menon, S. Márquez, D. Janner, E. Zanchi, A.G. Sabato, A. Tarancón, F. Smeacetto
Publicado en: Ceramics International, Edición 51, 2025, ISSN 0272-8842
Editor: Elsevier BV
DOI: 10.1016/J.CERAMINT.2025.07.326

Materials and Design

Autores: Zanchi, E.; Javed, H.; De La Pierre, S.; Ferraris, M.; Cempura, G.; Benelli, A.; Boccaccini, A. R.; Smeacetto, F.
Publicado en: Materials & Design, 2024, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/J.MATDES.2025.113592

Single-step fully 3D printed and co-sintered solid oxide fuel cells

Autores: Natalia Kostretsova, Arianna Pesce, Simone Anelli, Marc Nuñez, Alex Morata, Federico Smeacetto, Marc Torrella and Albert Tarancón
Publicado en: Journal of materials chemistry A, 2024, ISSN 2050-7496
Editor: Royal Society of Chemistry
DOI: 10.1039/D4TA02490G