Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

Novel bipolar Membrane-Electrode Assembly designs for Simultaneous CO2 Capture and Reduction

Description du projet

Des techniques avancées pour relever les défis liés au CO2

L’augmentation des niveaux de CO2 constitue une menace de taille pour notre planète, responsable de crises énergétiques et environnementales. Bien que la réduction électrochimique du CO2 (eCO2R) se révèle prometteuse pour convertir le CO2 en produits de valeur, des défis au niveau des matériaux et des systèmes entravent sa mise en œuvre pratique. Qui plus est, les étapes intermédiaires à forte intensité énergétique impliquées dans le transport du CO2 capturé vers les sites d’eCO2R sont souvent négligées. Avec le soutien du programme Actions Marie Skłodowska-Curie (MSCA), le projet BattleCapCO2 propose une solution révolutionnaire: un réacteur à flux unitaire qui intègre de manière homogène les processus de captage et de réduction du CO2, promettant à la fois performances et rentabilité. Des assemblages uniques de membranes bipolaires et d’électrodes seront développés à l’aide de techniques avancées telles que l’impression 3D et la photolithographie. Celles-ci faciliteront le captage, la régénération et l’électro-réduction simultanées du CO2 en produits chimiques de valeur.

Objectif

The discovery of efficient technologies for mitigation of the rising CO2 level and the associated energy and environmental issues is
the grand challenge of our time. Electrochemical CO2 reduction (eCO2R) is one promising approach to convert CO2 into valuable
products, but the practical realization is still limited by material and system-level challenges. On top of this, the pathway to bring CO2
captured from a point source to an eCO2R site involves energy-intensive, practically difficult intermediate steps often overlooked by
the research community. The BattleCapCO2 project introduces a new pathway to fully integrate CO2 capture and CO2 reduction
(CO2CR) in a unit flow reactor. This will be achieved by a unique design of bipolar membrane-electrode assemblies obtained by
coupled 3D printing and photolithography techniques. An attempt will be done to elucidate the impact of BPM interface
morphologies and electrode surface properties on the efficiency of CO2CR. The conceptual flow reactor design allows for
simultaneous CO2 capture, in situ regeneration, and subsequent electroreduction into useful chemicals, presenting an energy efficient and cost-effective technological solution.
The action will broaden the knowledge and expertise of the researcher through high-quality research training in the field of
carbon capture and utilization, involving multidisciplinary investigation approaches and intersectoral secondments. This will allow
him to expand his professional network with leading scientists in academia and industry from across Europe and the globe, and
acquire key skill sets towards professional independence. The project will provide new technological solutions with a significant
impact on the ambitious Europan green deal aiming to transform EU into a resource-efficient and competitive economy, ensuring a
climate-neutral society.

Champ scientifique (EuroSciVoc)

Mots‑clés

Programme(s)

Thème(s)

Régime de financement

HORIZON-TMA-MSCA-PF-GF - HORIZON TMA MSCA Postdoctoral Fellowships - Global Fellowships

Voir tous les projets financés dans le cadre de ce programme de financement

Appel à propositions

(s’ouvre dans une nouvelle fenêtre) HORIZON-MSCA-2023-PF-01

Voir tous les projets financés au titre de cet appel

Coordinateur

UNIVERSITA DELLA CALABRIA
Contribution nette de l'UE
€ 303 776,64
Adresse
VIA PIETRO BUCCI 7/11/B
87036 ARCAVACATA DI RENDE
Italie
Région
Centro (IT) Lazio Roma
Type d’activité
Higher or Secondary Education Establishments
Liens
Coût total
Aucune donnée

Partenaires (3)