To investigate defect formation in Ti-26Fe-4Sn-2.5Nb the LPBF parameters of laser power and laser speed were investigated, along with powder-bed temperature and powder-free remelting strategies. A secondment at the Deutsches Zentrum fur Luft- und Raumfahrt (DLR) was undertaken, where an LPBF machine that was modified to achieve high temperature substrates is housed. 25 combinations of laser powder, laser speed, and powder-free laser remelting strategies were tested at 4 substrate temperatures, creating 100 samples. The most promising samples were characterized, revealing how cracking increased as powder bed temperature decreased, and that cracking could be reduced by optimizing laser powers and speeds during powder-melting and powder-free remelting.
4 rounds of synchrotron experiments were accomplished at the European Synchrotron Radiation Facility as part of the AM BAG. These experiments consisted of high-temperature operando synchrotron X-ray radiography and in-situ synchrotron X-ray computed tomography (S-XCT). A custom high-temperature stage was designed for the operando X-ray radiography experiments, and resulted in the first (as far as the project participants are aware) high-temperature operando LPBF radiography datasets. The operando and in-situ experiments revealed porosity and crack formation and healing during LPBF of Ti-26Fe-4Sn-2.5Nb at the microscale in real time during the layer-by-layer manufacturing process. The experiments showed how combinations of laser power, laser speed, powder-bed temperature, and powder-free remelting affected the defects, and allowed comparison to the larger bulk samples manufactured during the secondment.
An additional result was a study of the effect of powder-bed substrate composition on LPBF of novel alloys design for AM. The effects of an industry standard alloy, Ti-6Al-4V, on the LPBF of novel alloy Ti-26Fe-4Sn-2.5Nb were characterized and described in 3D/4D, and validated that the novel alloy could be tested on industry standard substrates without risk of damage to the system.
A full microstructural characterization of the operando samples was combined with the S-XCT and radiography data to provide a comprehensive 3D/4D understanding of the microstructure and defect formation in Ti-26Fe-4Sn-2.5Nb during LPBF.