Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS

Ion Flow in Microfluidics with Liquid Crystal Elastomer Actuators

Descripción del proyecto

Sistemas microfluídicos más inteligentes y versátiles

El control de fluidos a escala microscópica es fundamental para aplicaciones como la recolección de energía y la desalinización. No obstante, los dispositivos microfluídicos actuales presentan limitaciones derivadas de su diseño rígido. El proyecto IonFlowElast, que cuenta con el apoyo de las acciones Marie Skłodowska-Curie, contribuirá al avance de la microfluídica mediante el uso de elastómeros de cristal líquido (ECL): materiales capaces de cambiar de forma cuando se estimulan para crear sistemas dinámicos y adaptativos. Al incorporar ECL en las paredes de los canales, estos dispositivos pueden adaptar su forma para funcionar como bombas o válvulas. Se llevarán a cabo simulaciones avanzadas para estudiar cómo estos cambios de forma influyen en el flujo de fluidos y en el transporte de iones. Este trabajo innovador es fundamental para avanzar en nuevos planteamientos ascendentes en nanotecnología y, además, podría dar lugar a sistemas microfluídicos totalmente integrados y adaptables.

Objetivo

Microfluidic devices consist of microscopic channels designed for precise fluid control. Their small size ensures laminar fluid flow, enabling the controlled transport of dissolved substances with applications in energy harvesting, desalination or even novel computing paradigms. However, the typical rigid network of channels greatly restricts their adaptability, and consequently, there is growing interest in developing time-evolving microfluidic systems, that can function as pumps, valves and mixing units. This requires a deeper understanding of fluid flows in dynamic environments and the development of stimuli-responsive materials for microfluidic walls. A highly promising approach involves the use of Liquid Crystal Elastomers (LCEs), which can change shape when stimulated. By incorporating LCEs into the walls of microfluidic devices, these systems can become responsive. The shape morphing can then be applied in microfluidic pumps and valves, two components required to achieve a fully integrated lab on a chip. I propose to pioneer the use of LCEs in responsive microfluidics and to deepen our understanding of the intricate non-linear dynamics between channel shape and conductivity. I will perform numerical simulations of the capabilities of LCEs in shape morphing microfluidic channels. I will then take the shape morphing channels and use the Lattice Boltzmann Method to simulate the transport of fluid and dissolved ions inside shape morphing channels. This will allow me to understand how to use LCEs in a microfluidic channel that, when stimulated, exhibits peristaltic motion or blocks the fluid flow. The project enables bidirectional knowledge transfer: the host’s expertise in liquid crystals will be instrumental for modeling LCEs, while my expertise in fluid dynamics will contribute to understanding transport in shape-morphing channels. This collaborative effort is crucial for advancing new bottom-up approaches in nanotechnology, aligning with European priorities.

Ámbito científico (EuroSciVoc)

Palabras clave

Programa(s)

Tema(s)

Régimen de financiación

HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European Fellowships

Ver todos los proyectos financiados en el marco de este régimen de financiación

Convocatoria de propuestas

(se abrirá en una nueva ventana) HORIZON-MSCA-2024-PF-01

Ver todos los proyectos financiados en el marco de esta convocatoria

Coordinador

UNIVERSITEIT UTRECHT
Aportación neta de la UEn
€ 217 076,16
Coste total
Sin datos