Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS

Highly deformable ceramic composites for ceramic forging and high temperature applications

Descripción del proyecto

Cerámica versátil, duradera y adaptable para aplicaciones de alto rendimiento

La cerámica es increíblemente duradera, pero difícil de fabricar. También tienden a ser frágiles debido a su baja tenacidad a la fractura y a la falta de mecanismos de deformación plástica. En trabajos anteriores, los investigadores habían desarrollado un innovador compuesto cerámico con notables propiedades. El material puede deformarse al menos un 14 % y es hasta 100 veces más resistente que la cerámica tradicional a unos 1 000 grados Celsius. Esos avances permiten nuevas posibilidades, como forjar cerámicas con formas complejas y crear componentes fuertes para quemadores o motores que resistan altas temperaturas. El proyecto StoneForge, financiado por el Consejo Europeo de Investigación, pretende mejorar aún más el rendimiento del material, perfeccionar el proceso de forja y ensayar el procesado continuo de estos compuestos. Si tiene éxito, el proyecto contribuirá a hacer de la cerámica una alternativa más barata, rápida y adaptable.

Objetivo

Despite their incredible durability, ceramics used are hampered by two limitations: they are difficult to manufacture compared with continuous manufacturing of metals and polymers, and they are brittle, even at relatively high temperature. Both these limitations are coming from their low fracture toughness and the absence of plastic deformation mechanisms. One the goal of my ERC SSTEEL was to find a way to toughen ceramic composites by introducing strain hardening mechanisms at the nanometric scale. We succeeded and produced a ceramic composite that show plastic deformation of at least 14% and toughness two orders of magnitude higher, in terms of energy release rate, than conventional structural ceramics at temperature around 1000°C. These temperatures are close to the ones used to hot forge steel and thus open two new applications avenues for these deformable ceramics. One is enabling ceramics forging, using preform to produce complex shapes in a quick and simple way. The other is using this high toughness to produce structural ceramics for high temperature applications, in burners or even engines. The goal of this Proof-of-Concept project is three-fold: 1. to work on the ceramic composition to lower the temperature needed for deformation or improve their high temperature mechanical resistance, 2. to develop the forging of ceramic beyond the initial results to showcase the capabilities to future clients, 3. to start testing the continuous processing of these composites. Succeeding in these goals holds promises for cheaper and faster manufacturing of complex-shaped ceramic parts, opening a wealth of potential applications previously limited to metals or polymers, as well as developing more ductile high temperature stru

Ámbito científico (EuroSciVoc)

Programa(s)

Tema(s)

Régimen de financiación

HORIZON-ERC-POC - HORIZON ERC Proof of Concept Grants

Ver todos los proyectos financiados en el marco de este régimen de financiación

Convocatoria de propuestas

(se abrirá en una nueva ventana) ERC-2024-POC

Ver todos los proyectos financiados en el marco de esta convocatoria

Institución de acogida

IMPERIAL COLLEGE OF SCIENCE TECHNOLOGY AND MEDICINE
Aportación neta de la UEn
€ 150 000,00
Dirección
SOUTH KENSINGTON CAMPUS EXHIBITION ROAD
SW7 2AZ London
Reino Unido
Región
London Inner London — West Westminster
Tipo de actividad
Higher or Secondary Education Establishments
Enlaces
Coste total
Sin datos

Beneficiarios (1)