Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS

Sustainable Thermoelectric Generators for Low-Power Applications

Descripción del proyecto

Nueva solución de generador termoeléctrico para aplicaciones de internet de las cosas de baja potencia

El internet de las cosas (IdC), que forma parte integrante de varios servicios y sectores, es fundamental para la digitalización. Se espera que aumente la seguridad, la sostenibilidad e incluso la competitividad de la sociedad. Un reto en el desarrollo y avance continuos del IdC es la necesidad de soluciones energéticas sostenibles y duraderas que generen el mínimo de residuos electrónicos. Los materiales termoeléctricos, que podrían convertir el omnipresente calor residual en electricidad, son una opción prometedora. Sin embargo, los materiales termoeléctricos disponibles suelen ser caros e insostenibles. En el proyecto SUSTEG, financiado por el Consejo Europeo de Investigación, se investigará y desarrollará una solución termoeléctrica innovadora, rentable, flexible y sostenible para alimentar dispositivos de IdC. El dispositivo se fabricará solo con materiales respetuosos con el medio ambiente para minimizar los residuos electrónicos.

Objetivo

The Internet of Things (IoT), where everyday objects sense their environment and communicate with each other, is a key drive of digitalization expected to make our society safer, more sustainable, and more competitive. The full deployment of the IoT requires sustainable and long-lasting energy solutions to minimize e-waste. Thermoelectrics (TEs) can convert the ubiquitous waste heat into electricity and could complement or even replace batteries to meet the renewable energy needs of IoT nodes. However, commercially available TEs are expensive, rely on raw critical materials, and present a limiting form factor (small, rigid, and flat) preventing their application on curved and dynamic surfaces.

This research proposes the development of cost-effective and sustainable flexible TEs to power IoT devices. The devices will involve exclusively environmentally friendly materials, namely conducting polymers dissolved in non-toxic solvents, along with a compostable substrate to minimize e-waste. Fabrication will be carried out using brush and inkjet printing, performed at ambient conditions and temperatures below 150 °C. The process flow will be limited to 5-6 simple steps, avoiding post-treatment with harmful chemicals or energy-intensive procedures. Despite their minimalistic processing, the devices performance will be comparable to the state-of-the-art organic TE generators. They will generate a ~ 100 nW/cm^2 from a temperature difference of 20 K, a condition easily met in daily life scenarios such as contact with a wall heater, proximity to a motor, or mounted on human or pets skin. This power density over surface areas of a few cm^2 is sufficient to operate low-power IoT edge devices like low-sense rate accelerometers, pacemakers, RFID tags, thermometers, or light sensors.

Ámbito científico (EuroSciVoc)

Programa(s)

Tema(s)

Régimen de financiación

HORIZON-ERC-POC - HORIZON ERC Proof of Concept Grants

Ver todos los proyectos financiados en el marco de este régimen de financiación

Convocatoria de propuestas

(se abrirá en una nueva ventana) ERC-2025-POC

Ver todos los proyectos financiados en el marco de esta convocatoria

Institución de acogida

KATHOLIEKE UNIVERSITEIT LEUVEN
Aportación neta de la UEn
€ 135 000,00
Dirección
OUDE MARKT 13
3000 Leuven
Bélgica
Región
Vlaams Gewest Prov. Vlaams-Brabant Arr. Leuven
Tipo de actividad
Higher or Secondary Education Establishments
Enlaces
Coste total
Sin datos

Beneficiarios (2)