Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS

Strategic Microstructure Design for Energy Efficient Copper Bearings

Descripción del proyecto

Una revolución en la tecnología de rodamientos para cargas elevadas

En la ingeniería moderna, los rodamientos se han convertido en un componente fundamental e indispensable para el funcionamiento de una amplia gama de máquinas y tecnologías en diversos sectores, desde el transporte y la energía hasta la industria manufacturera y la medicina. No obstante, a pesar de sus ventajas y fiabilidad, los rodamientos son propensos a sufrir fallos prematuros debido a la fricción, la tribooxidación o el desgaste. Las soluciones actuales solo ofrecen mejoras parciales y no abordan la causa fundamental. El equipo del proyecto SOAR, financiado por el Consejo Europeo de Investigación, tiene como objetivo abordar esta causa fundamental, que es la ausencia de aleaciones metálicas con microestructuras intrínsecamente resistentes al desgaste y a la fricción. Se desarrollará y se demostrará una nueva clase de aleaciones a base de cobre especializadas para rodamientos sometidos a cargas elevadas.

Objetivo

Bearings are indispensable components across modern engineering technology, from transport and energy to manufacturing and medical devices. Their reliability is fundamentally limited by premature failure due to friction, wear, and tribo-oxidation. Existing approaches to extend bearing lifetime - incremental alloy modifications, protective coatings, or self-lubricating composites - offer only partial improvements. They do not address the root cause: the absence of metallic alloys with microstructures that are intrinsically resistant to friction and wear.
This PoC project aims to demonstrate the feasibility of a new class of copper-based alloys for high-load bearings, developed through microstructure-by-design principles rather than empirical trial-and-error. Building directly on the ERC Consolidator Grant TriboKey, which revealed how deformation twinning, dislocation plasticity, tribo-oxidation regimes, and surface topography control friction and wear, the project will translate these insights into actionable design rules. By tailoring grain-scale architectures, controlling oxide formation regimes, and optimizing surface waviness–lubrication interactions, we will fabricate alloys with durability embedded at the material level.
The project pursues four objectives: (i) fabricate demonstrator alloys via two processing routes, (ii) validate their tribological performance in lab tests under application-relevant conditions, (iii) clarify the intellectual property and knowledge transfer strategy, and (iv) develop a roadmap for exploitation with industrial partners. Activities will be supported by advanced characterization and close collaboration with potential end users.
By embedding wear resistance, low friction, and robustness directly into the alloy microstructure, this project introduces a paradigm shift in bearing design. Beyond bearings in energy systems, the innovation has cross-sectoral potential in aerospace, automotive, marine, and heavy machinery applications.

Ámbito científico (EuroSciVoc)

Palabras clave

Programa(s)

Tema(s)

Régimen de financiación

HORIZON-ERC-POC - HORIZON ERC Proof of Concept Grants

Ver todos los proyectos financiados en el marco de este régimen de financiación

Convocatoria de propuestas

(se abrirá en una nueva ventana) ERC-2025-POC

Ver todos los proyectos financiados en el marco de esta convocatoria

Institución de acogida

KARLSRUHER INSTITUT FUER TECHNOLOGIE
Aportación neta de la UEn
€ 150 000,00
Dirección
KAISERSTRASSE 12
76131 Karlsruhe
Alemania
Región
Baden-Württemberg Karlsruhe Karlsruhe, Stadtkreis
Tipo de actividad
Higher or Secondary Education Establishments
Enlaces
Coste total
Sin datos

Beneficiarios (1)