Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

Accelerating the commercialisation of printed triple mesoscopic perovskite solar cells through ferroelectric nanocomposites

Description du projet

Améliorer le rendement de conversion des cellules solaires imprimées à pérovskite triple mésoscopique

Les technologies photovoltaïques (PV) et des cellules solaires à pérovskite (PSC) ont considérablement progressé ces dernières années, de nombreuses solutions ayant atteint le stade de la viabilité commerciale et favorisant l’adoption et l’intégration de solutions d’énergie solaire. Les cellules solaires imprimées à pérovskite triple mésoscopique (TM-PSC) constituent une technologie prometteuse qui offre une meilleure stabilité, une fabrication à grande échelle plus aisée et des coûts de production plus faibles que les technologies PSC actuelles. Cette technologie se heurte toutefois à un obstacle majeur: elle n’a pas atteint le rendement de conversion des PSC actuelles à couche mince et à jonction unique. Financé par le CER, le projet PriMe-Ferro surmontera cet obstacle en étudiant et en développant des solutions qui porteront le rendement de conversion à des niveaux commercialement viables. Pour y parvenir, le projet concevra des architectures intégrant des matériaux ferroélectriques aux TM-PSC.

Objectif

Printed triple mesoscopic perovskite solar cells (TM-PSCs) have excellent potential to be a commercially viable photovoltaic (PV) technology: they are easily manufactured at scale avoiding expensive materials or processes. They are also intrinsically much more stable than alternative PSC technologies – a major advantage as stability concerns must be overcome to induce confidence in emerging PSC products. However, TM-PSCs have not reached the power conversion efficiency (PCE) levels achieved by conventional single-junction, thin-film PSCs (27% compared to 20% for TM-PSCs). Therefore, new approaches are needed to overcome the challenges of charge-carrier recombination and open-circuit voltage (Voc) losses that hinder the efficiency of TM-PSCs due to the non-ideal perovskite crystallisation within their porous scaffolds, and non-ideal interfaces.

PriMe-Ferro will explore a new approach to boost the efficiency of TM-PSCs towards commercially viable levels. It will integrate ferroelectric materials into the TM-PSC design with a novel architecture in order to take advantage of the proven ability of ferroelectrics to enhance charge carrier separation in coupled semiconducting materials, reducing recombination losses. It will also draw novel photovoltaic effects in ferroelectrics, which, when coupled to TM-PSCs could reduce Voc losses and even lead to efficiencies beyond the Shockley-Queisser limit.

Experimental data will be obtained to provide clear proof-of-concept for this novel approach by building, testing and measuring the novel device architectures. In parallel, a full commercial pathway will be planned by undertaking market research, cost-benefit calculations, patentability assessment and business planning. These will result in clear evidence and plans to drive forward the commercialisation of this new PV device concept combining manufacturability, high efficiency and high stability.

Champ scientifique (EuroSciVoc)

Programme(s)

Thème(s)

Régime de financement

HORIZON-ERC-POC - HORIZON ERC Proof of Concept Grants

Voir tous les projets financés dans le cadre de ce programme de financement

Appel à propositions

(s’ouvre dans une nouvelle fenêtre) ERC-2025-POC

Voir tous les projets financés au titre de cet appel

Institution d’accueil

QUEEN MARY UNIVERSITY OF LONDON
Contribution nette de l'UE
€ 150 000,00
Coût total
Aucune donnée

Bénéficiaires (1)