Objetivo
The objectives of this project were to:
-Develop a dynamic scheduling system for the factory based on Knowledge-Based System (KBS) techniques. The system was to bridge the time gap between the large planning horizons of logistic systems, eg COPICS/MRP II, and the real-time conditions on the sh op floor (microplanning).
-Develop generic shells for the following: knowledge acquisition modules both for factory analysis and factory operation; user interface modules for different kinds of operators, including management in the factory using KBS techniques and multi-windowin g; and expert systems for production planning, preventative maintenance and quality control.
-Build these modules, implement them in two very different plants (electronic appliances and tyre manufacturing), and test the applicability of one generic shell to the different applications.
The programme included the development of:
-software modules for plant data acquisition, real-time plant data updating, interpretation KBS, and plant simulation
-KBS for maintenance, quality and process planning
-knowledge-acquisition modules for GRAI and SADT analysis methodologies.
Tyre quality assistant (TQA) is a knowledge based system (KBS) for the intelligent support of a quality manager (QM). The system considers about 60 defects and 300 corrective actions in the production of industrial vehicle tyres. The knowledge base has about 500rules, about 20 database static objects (with hundreds of slots), and several tens of database dynamic objects (actions). The system is currently installed in an Italian tyre factory of the Pirelli Group.
Innovative aspects include:
integration of conventional software technology and knowledge based systems (KBS) technology;
integration of tyre quality assistant (TQA) with the already existing factory information system;
an intelligent decision support system (IDSS).
The objectives of this project were: firstly, to develop a dynamic scheduling system for the factory based on knowledge based system (KBS) techniques. The system bridged the time gap between the large planning horizons of logistic systems, and the real time conditions on the shop floor. Secondly, to develop generic shells for the following: knowledge acquisition modules both for factory analysis and factory operation; user interface modules for different kinds of operators, including management in the factory using KBS techniques and multiwindowing; and expert systems for production planning, preventative maintenance and quality control. Thirdly, to build these modules, implement them in 2 very different plants (electronic appliances and tyre manufacturing), and test the applicability of one generic shell to the different applications. The programme included the development of: software modules for plant data acquisition, real time plant data updating, interpretation KBS, and plant simulation; KBS for maintenance, quality and process planning; and knowledge acquisition modules for analysis methodologies. The decision network acquisition tool (DNAT) has been programmed and the decision network analysis of the factories completed. The controller for the surface mounted devices workcell has been designed. The general system design has been finished. The diagnosis KBS has been programmed. Demonstrations are available for a workcell controller, artificial intelligence (AI) simulation, a diagnosis KBS, a planning KBS, a commonality analysis of electronic products, a planning KBS, a DNAT tool, and a knowledge acquisition tool.
The decision network acquisition tool (DNAT) has been programmed and the decision network analysis of the factories completed. The controller for the SMD (surface-mounted devices) workcell has been designed at Philips. The general system design has been finished for the dynamic planning task at Pirelli and BICC. The diagnosis KBS has been programmed for Pirelli. Demonstrations are available for:
-workcell controller at PFH
-AI simulation of FMS at PFH
-diagnosis KBS at ARS
-planning KBS at BICC
-commonality analysis of electronic products at PZI
-planning KBS at AEG
-DNAT tool at Graphael/SGN
-knowledge-acquisition tool at Politecnico di Milano.
The use of KBS for dynamic scheduling will enable a rapid response to changes in requirements and in machine and material availability. The first KBS was introduced into the Pirelli factory during 1987. Piloting of workcell controllers in Philips CIM production line took place in late 1988 for short-term production planning, and was followed by quality and maintenance controllers in late 1989. The final result of the project was the description of the various KBSs developed by each partner following the project's CIM-AI Implementation Guide.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ciencias naturales informática y ciencias de la información software
- ciencias naturales informática y ciencias de la información base de datos
- ciencias naturales informática y ciencias de la información inteligencia artificial sistemas expertos
- ciencias sociales economía y empresa ciencia económica economía de la producción
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Datos no disponibles
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Datos no disponibles
Coordinador
2000 HAMBURG
Alemania
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.