Objetivo The project objective was to design, engineer and build a hardware device able to simulate, in real time, a broad range of flat-panel displays. These include electro-luminescent (EL), thin film EL, memory EL, active matrix liquid crystal (LC), ferroelectric LC and supertwisted LC. This device can be used by office automation and display manufacturers to test the properties of new technologies and to optimise the display parameters in order to obtain good image quality and maximum user acceptability. The simulator facility can also help display designers and users (office automation manufacturers, user organisations, etc) in the definition of new products and applications. Specific objectives were to: -compare various simulated display technologies and technical solutions according to user acceptability criteria -perform ergonomic experiments, under prolonged office work conditions, to find the relationships between technology-dependent display properties, visual discomfort and image quality. The project objective was to design, engineer and build a hardware device able to simulate, in real time, a broad range of flat panel displays. These include electroluminescent (EL) displays, thin film EL displays, memory EL displays, active matrix liquid crystal (LC) displays, ferroelectric LC displays, and supertwisted LC displays. The device can be used by office automation and display manufacturers to test the properties of new technologies and to optimize the display parameters in order to obtain good image quality and maximum user acceptability. The simulator facility can also help display designers and users (office automation manufacturers, user organisations, etc) in the definition of new products and applications.Specific objectives were to:compare various simulated display technologies and technical solutions according to user acceptability criteria;perform ergonomic experiments, under prolonged office work conditions, to find the relationships between technology dependent display properties, visual discomfort and image quality.Achievements were:demonstration of simulator;top level design of the simulation software required for real time simulation of display technologies;implementation and demonstration of versions of an EL display model;design of the high resolution digitally controlled colour monitor required to visualize the simulated displays;design of a shading correction technique for cathode ray tube (CRT);construction of a functional model of visual perception.Achievements were: -demonstration of simulator -top-level design of the simulation software required for real-time simulation of display technologies -implementation and demonstration of versions of an electro-luminescent display model -design of the high-resolution digitally controlled colour monitor required to visualise the simulated displays -design of a shading correction technique for CRT -construction of a functional model of visual perception. Exploitation The simulation facilities, which can help display and office automation manufacturers shorten the design cycle of displays acceptable to users, are accessible at the Universiteit van Twente. Those interested should contact the university directly as follows: Prof BosmanUniversiteit van TwentePostbus 217& +31/53-892-780NL - 7500 AEfax +31/53-354-003ENSCHEDEtelex 44200 A further development of the high-resolution digitally controlled colour monitor developed by Barco was used in project 2649, VASARI, and is now available on the market. Ámbito científico ingeniería y tecnologíaingeniería de materialescoloresciencias socialessociologíarelaciones laboralesautomatizacióningeniería y tecnologíaingeniería de materialesrecubrimiento y películasciencias naturalesinformática y ciencias de la informaciónsoftwaresoftware de aplicaciónsoftware de simulacióningeniería y tecnologíaingeniería de materialescristal líquido Programa(s) FP1-ESPRIT 1 - European programme (EEC) for research and development in information technologies (ESPRIT), 1984-1988 Tema(s) Data not available Convocatoria de propuestas Data not available Régimen de financiación Data not available Coordinador OCE-NEDERLAND BV Dirección St. urbanusstraat postbus 101 5900 MA Venlo Países Bajos Ver en el mapa Aportación de la UE Sin datos Participantes (6) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo BARCO-INDUSTRIES NV Bélgica Aportación de la UE € 0,00 Dirección President kennedy park 35 8500 Kortrijk Ver en el mapa Otras fuentes de financiación Sin datos GEC-Marconi Materials Technology Ltd Reino Unido Aportación de la UE € 0,00 Dirección Elstree way WD6 1RX Borehamwood Ver en el mapa Otras fuentes de financiación Sin datos MYFRA SA Francia Aportación de la UE € 0,00 Dirección 83 avenue aristide briand 92120 Montrouge Ver en el mapa Otras fuentes de financiación Sin datos THOMSON CSF Francia Aportación de la UE € 0,00 Dirección 160 boulevard de valmy 92074 Paris la defense Ver en el mapa Otras fuentes de financiación Sin datos UNIV VAN TWENTE Países Bajos Aportación de la UE € 0,00 Dirección Drienerlolaan postbus 217 7500 AE Enschede Ver en el mapa Otras fuentes de financiación Sin datos Université de Paris Francia Aportación de la UE € 0,00 Dirección Rue de l'ecole de medecine 75006 Paris Ver en el mapa Otras fuentes de financiación Sin datos
