European Commission logo
English English
CORDIS - EU research results
CORDIS
Content archived on 2024-04-16

CIM Implementation Addressing Levels of Integration in Various Environments

Objective

This project covered the definition phase of the CIM-ALIVE Technology Integration Project (TIP). The objective of CIM ALIVE was to establish a common project CIM reference model identifying cost-effective reusable CIM concepts.
This project covered the definition phase of the CIM-ALIVE Technology Integration Project (TIP). The objective of the project was to establish a common project computer integrated manufacture (CIM) reference model identifying cost effective reusable CIM concepts. The industrial environments to be addressed were component manufacture and assembly of electromechanical products, chemicals production, and printed circuit board production. Approximately 13 industrial environments were surveyed. The current situation at each of the sites was established and their position relative to sites outside the project considered. The future requirements at each site will be detailed and used as an input to a common project CIM reference model. Common requirements which will benefit from the adoption of relevant new technologies will be investigated.
The industrial environments to be addressed were:

- component manufacture and assembly of electromechanical products
- chemicals production
- printed circuit board production.

Topic(s)

Data not available

Call for proposal

Data not available

Funding Scheme

Data not available

Coordinator

Cegelec Projects Ltd
EU contribution
No data
Address
Boughton Road
CV21 1BU Rugby
United Kingdom

See on map

Total cost
No data

Participants (4)