Objectif
A research programme is proposed which has the following aims in its 1st phase.
- To refine the algorithms for LNS arithmetic, to offer better average accuracy than FP.
- To design an ALU cell for its economical implementation, and to show that this cell will perform at higher average speed than FP.
- To verify the superiority of the LNS design by simulated comparison with FP in a variety of general mathematical and DSP applications.
This work during the 1st phase will be aimed at finalising the arithmetic algorithms and proving their superiority over floating-point. Theoretical refinements will be made to the algorithms in order to achieve the targets for speed and accuracy. A software simulation will be made available with which the accuracy of the system can be evaluated against that of floating-point, and proven over a range of larger-scale applications. A software library of DSP applications will be built. A detailed ALU cell design will be done, and from this it will be shown that the device will meet the target speed, and that it can economically be fabricated.
Once the feasibility of the approach has been demonstrated and the objectives of the 1st phase have been achieved the project will enter into a second phase with the following aims:
- To fabricate the design, to produce the world's first LNS-based ALU with significant advantage over FP; and to test and verify this in real-time practical applications.
- To incorporate the ALU in commercial custom DSP devices, to allow independent verification.
- To develop a complete LNS-based microprocessor.
There is a world-wide demand for accurate, high-performance arithmetic devices. These find application in two primary areas : general-purpose computing (e.g. Intel Pentium) and digital signal processing (e.g. Texas Instruments 320C40).
Currently the universal technique for performing real arithmetic is floating-point. Rates of performance for devices using it are about 30 - 40 ns latency for 32-bit add. subtract and multiply. Division takes considerably longer, and all four operations are subject to a maximum half-bit rounding error.
There is, of course, a constant demand for higher speed and accuracy in almost any application area. Examples include the requirement or higher data-rates in FFT. Filtering and general-purpose arithmetic, evident throughout most areas of digital communications. image processing, radar and sonar, and desktop computing. Large specialised application areas are rapidly emerging, e.g. in multimedia and digital television. It is the objective of this project to increase the speed and accuracy at which real arithmetic can be performed by using the Logarithmic Number System (LNS), instead of floating-point.
In the LNS a real value is represented as its fixed-point logarithm. The primary advantage of the LNS is therefore that multiplication and division involve only a fixed-point addition or subtraction, and are thus performed in minimal time and with no rounding error. LNS addition and subtraction, however, have hitherto been considerably slower, less accurate or less precise than their floating-point counterparts, and have therefore nullified the advantages to be gained by using this technique. It is the objective of this project to develop LNS addition and subtraction techniques which are approximately as precise, fast and accurate as floating-point, and which in conjunction with LNS multiplication and division would therefore yield a substantial improvement in average speed and accuracy over floating-point.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles informatique et science de l'information logiciel
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique matériel informatique processeur informatique
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique traitement des signaux
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie de l’information télécommunication technologie radio radar
- sciences naturelles mathématiques mathématiques pures arithmétique logarithme
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
NE1 7RU NEWCASTLE UPON TYNE
Royaume-Uni
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.