Objectif
The overall objective is to achieve improvements in the performance of photomultiplier photocathodes by introducing surface structure into the cathode design. The basis of the innovation is an optical light trap of cones or ridges on the scale of the wavelengths detected. This first phase is intended to model the concept, and experimentally assess the risk factor for successful development. The second phase will optimise the process. There have been major improvements in cathode materials and minor changes from geometrical structures, but no method has offered total absorption throughout the spectral range.
All photocathodes produced so far involve a compromise between total optical absorption of the incoming light and electron extraction from the photocathode. Only for very high optical absorption coefficients, coupled with high photon energies, as found in the vacuum ultra-violet, can one fabricate a photocathode, which is both absorbing and sufficiently thin to allow electron extraction. However, for standard PM tubes the overriding requirement is to use thin films from which electrons can be extracted. The consequence is a cathode layer which is too thin to give total absorption of the light for long wavelengths, as is visibly apparent since the photocathodes are semi-transparent and only slightly coloured. A solution to the problem would imply higher performance PM tubes over a wide spectral range, so the benefits of PM speed of response and very high gain could be exploited.
However, the present proposal offers an innovative and simple solution, which, if it can be implemented, should achieve three aims.
Firstly, the quantum efficiency of conventional tubes would be enhanced from a present maximum of 25 to 30%, to near 50%. Secondly, the major fall in performance at the longer wavelengths (e.g. by say 800nm) which is primarily the result of non-absorption of the light, would be overcome, and high photocathode efficiencies might be maintained out to these longer wavelengths. Thirdly, the long wavelength limits of the current photoemissive materials are unexploitable, even though some sensitivity exists out to wavelengths as long as 1.6 microns. Enhancement of the optical absorption would improve this performance for the existing long wavelength tubes, and potentially extend the range of all the current red/near-IR response tubes. The proposed idea is simple, but technologically could not have been implemented until very recently, as for example it is planned to use a combination of pulsed laser ablation via phase masks, followed by ion beam machining, for which suitable laser and beam systems did not exist until now.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles mathématiques mathématiques pures topologie
- ingénierie et technologie génie mécanique ingénierie de fabrication fabrication soustractive
- ingénierie et technologie ingénierie des materiaux revêtement et films
- sciences naturelles sciences physiques optique physique des lasers lasers à impulsions
- sciences naturelles sciences physiques physique théorique physique des particules photons
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
BN1 9QG Brighton
Royaume-Uni
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.