Objetivo
The MAPICC 3D project and concept aims at developing manufacturing system for 3D shaped, multilayered products based on flexible materials. The ultimate goals are:
> The development of integrated and automated process chain able to produce from hybrid thermoplastic yarn to 3D complex shaped thermoplastic composite structure in single step thermoplastic consolidation process.
> The development of flexible industrial tools, able to produce customized final composites: possibility to reinforce the preform by coating, weaving multilayers, by injection of foam, by introduction of sensors (control quality of preform during the production or monitor the integrity of composite during use)
> The development of modelling tool in order to help understanding of the mechanisms involved in the new technologies and to prototype virtually 3D preform, predictive tools to evaluate the physical and mechanical properties of final 3D preform and final composites structure and at the last step reverse engineering.
The speed of production and the cost of manufacturing the 3D preform will be in accordance with the transport, building and energy thanks to:
• The use of raw materials at low cost based on thermoplastic polymer, or regenerated fibres,
• A decrease of production time. The polluting, labour-intensive and expensive steps of cutting, forming and joining, of current composites production could be avoiding.
• A dynamic quality control during the production to improve the process robustness,
• A decrease of quantity of wastes in comparison to current 2D preform based composite structures manufacturing.
The consortium allows integrating the entire process chain and involves the industrial stakeholders from machine tools, automation and modelling processing of flexible materials, yarn and textiles, composites and end users for transport: industry insures the leadership of the project.
Ámbito científico
- engineering and technologymaterials engineeringcomposites
- social sciencessociologyindustrial relationsautomation
- engineering and technologymaterials engineeringtextiles
- engineering and technologymaterials engineeringcoating and films
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors
Convocatoria de propuestas
FP7-NMP-2010-LARGE-4
Consulte otros proyectos de esta convocatoria
Régimen de financiación
CP-IP - Large-scale integrating projectCoordinador
59056 Roubaix
Francia
Ver en el mapa
Participantes (20)
5020 Namur
Ver en el mapa
92130 issy les moulineaux
Ver en el mapa
20133 Milano
Ver en el mapa
01069 Dresden
Ver en el mapa
75272 Paris
Ver en el mapa
92220 BAGNEUX
Ver en el mapa
10 000 ZAGREB
Ver en el mapa
La participación finalizó
59980 BERTRY
Ver en el mapa
1895 VIONNAZ
Ver en el mapa
93400 Saint Ouen
Ver en el mapa
1048 Riga
Ver en el mapa
7555 RJ Hengelo Ov
Ver en el mapa
1004 Riga
Ver en el mapa
La participación finalizó
59100 ROUBAIX
Ver en el mapa
La participación finalizó
7443 RE NIJVERDAL
Ver en el mapa
405 08 Goteborg
Ver en el mapa
La participación finalizó
59700 MARCQ EN BAROEUL
Ver en el mapa
63263 NEU-ISENBURG
Ver en el mapa
7440 AA Nijverdal
Ver en el mapa
04758 OSCHATZ
Ver en el mapa