Modelica library of thermodynamic and transport properties

Project Information

AEROTHERMOPROP

Grant agreement ID: 267614

Project closed

Start date 1 August 2010

End date 30 November 2011

Funded under

• Specific Programme "Cooperation": Joint Technology Initiatives

Total cost € 80 000,00

EU contribution € 60 000,00

Coordinated by

MODELON AB
Sweden

Objective

With this proposal, a Modelica library for thermodynamic properties of gases and liquids that are used as working media in aircraft, and an Excel interface to the same functions with plotting capabilities for typical thermodynamic design diagrams (Temperature-Entropy and Enthalpy-Entropy) shall be developed. It is important that the complete temperature and pressure range experienced by aircraft is covered, from -60 deg Celsius to 200 deg Celsius, depending on the fluid. The pressure range depends on the fluid, as an example a range from 150 to 1100 hPa is necessary for air. Currently available model libraries don't cover the complete range.
A fixed starting date of August 1st was chosen to align the project with the original planning of the ITD activities.

Fields of science

• engineering and technology › mechanical engineering › vehicle engineering › aerospace engineering › aircraft

Programme(s)

• FP7-JTI - Specific Programme "Cooperation": Joint Technology Initiatives

Topic(s)

• JTI-CS-2009-2-ECO-02-002 - Thermo physical Properties Library for Relevant Fluids

Call for proposal

SP1-JTI-CS-2009-02
See other projects for this call

Funding Scheme

JTI-CS - Joint Technology Initiatives - Clean Sky

Coordinator

MODELON AB

• EU contribution: € 60 000,00
• Address: IDEON SCIENCE PARK ; 22370 Lund ; Sweden
• Region: Södra Sverige › Sydsverige › Skåne län
• Activity type: Private for-profit entities (excluding Higher or Secondary Education Establishments)
• Administrative Contact: Jonas Eborn (Dr.)
• Total cost: No data