Objective
"The original requirement covered by this DEAFCON proposal was for the detailed design of two low speed half models, with a fully pressure plotted low sweep and high sweep wing respectively
Removable and variable Leading Edge, Trailing Edge and Wing Tip devices were to be included, and the main element of innovation and learning for ARA would have been the integration of some form of Active Flow Control technology, which had not yet been defined
DEAFCON
Also included would be relevant design changes to an unknown, but existing, half fuselage FALCON model to enable appropriate integration of either wing configurations together with their relevant AFC actuators ( recognising that these fuselage design modifications would need to be considered fully reversible )
However, prior to commencement of this programme, the scope and work content was changed quite considerably by the Topic Leader to comply with their final Specification document DGT-132940 Iss C Oct 2013
This document presented the specification of the design of a single large scale half-model for testing in a pressurized low speed wind tunnel. Integration of any Active Flow technology was thus dropped at this stage, and the parts to design within DEAFCON became therefore:-
• A left-hand side modular wing with high aspect-ratio and low sweep
• A set of Body fairings to fit with the fuselage
• A left hand side cross-shaped HTP and its movable attachment fitting compatible with the former Vertical Tail
• A simplified main landing gear and its cavity"
Fields of science (EuroSciVoc)
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: The European Science Vocabulary.
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: The European Science Vocabulary.
- engineering and technology mechanical engineering vehicle engineering aerospace engineering aircraft
- natural sciences physical sciences classical mechanics fluid mechanics fluid dynamics
You need to log in or register to use this function
We are sorry... an unexpected error occurred during execution.
You need to be authenticated. Your session might have expired.
Thank you for your feedback. You will soon receive an email to confirm the submission. If you have selected to be notified about the reporting status, you will also be contacted when the reporting status will change.
Programme(s)
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Topic(s)
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Call for proposal
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
SP1-JTI-CS-2010-03
See other projects for this call
Funding Scheme
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
Coordinator
MK41 7PF Bedford
United Kingdom
The total costs incurred by this organisation to participate in the project, including direct and indirect costs. This amount is a subset of the overall project budget.