Skip to main content

Development of numerical models fo aircraft systems to be used within the JTI/GRA Shared Simulation Environment

Objective

This project makes a key contribution to the AEA through the development of novel simulation models for the quantitative evaluation of the mechanical, electrical, and thermal behaviour implied by the use of EMAs. This goal will be achieved via innovative developments on different levels. Firstly, the physical-mathematical models of both the EMAs and the FCS/LG will be set-up in such a way that they can be interlinked through the exchange of common parameters, typically EMA-positions and aerodynamic forces/torques. Secondly, the individual components will be integrated into a single simulation model, which directly interfaces with the Shared Simulation Environment (SSE) of AEA, GRA3. Thirdly, test scenarios will be defined, which are adequate for the validation of the electro-mechanical and electro-thermal outputs. The electro-thermal data involved in these test scenarios differs from that normally considered for mechanical/hydro-mechanical systems. To ensure that the simulation models can readily be integrated into existing aircraft concepts and simulation tools, standards will be used wherever possible.

Call for proposal

SP1-JTI-CS-2010-04
See other projects for this call

Coordinator

TWT GMBH SCIENCE & INNOVATION
Address
Ernsthaldenstrasse 17
70565 Stuttgart
Germany
Activity type
Private for-profit entities (excluding Higher or Secondary Education Establishments)
EU contribution
€ 72 270
Administrative Contact
Alice Hilscher

Participants (1)

BAUSCH-GALL GMBH
Germany
EU contribution
€ 40 230
Address
Wohlfartstrasse 21 B
80939 Munchen
Activity type
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Administrative Contact
Ingrid Bausch-Gall (Dr.)