Skip to main content
Go to the home page of the European Commission (opens in new window)
English en
CORDIS - EU research results
CORDIS
Content archived on 2024-05-28

Microwave assisted curing for carbon fiber reinforced epoxy composites

Objective

"The main objective of WAVECOM project is the development of a technology suitable for carbon fiber reinforced composites manufacturing based on microwave curing of its raw materials, which includes the selection of the proper additives (dipole organic molecules or nanostructured magnetic materials) and the set up of the system at pilot plant level. A better understanding of potential distortions and residual stress effects of MW will be obtained by using Fibre Bragg Grating technology. Tooling materials and their geometrical limitations will be obtained as well. Finally, an assessment on the final properties of the composites and the benefits of this technology in economic and ecological terms will be also carried out."

Fields of science (EuroSciVoc)

Programme(s)

Topic(s)

Call for proposal

SP1-JTI-CS-2012-01
See other projects for this call

Funding Scheme

JTI-CS - Joint Technology Initiatives - Clean Sky

Coordinator

AIMPLAS - ASOCIACION DE INVESTIGACION DE MATERIALES PLASTICOS Y CONEXAS
EU contribution
€ 104 236,00
Address
VALENCIA PARC TECHNOLOGIC CALLE GUSTAVE EIFFEL 4
46980 Paterna
Spain
Region
Este Comunitat Valenciana Valencia/València
Activity type
Research Organisations
Links
Total cost
No data