Skip to main content
European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary
Contenido archivado el 2024-06-18

Direct Manufacturing of stator vanes through electron beam melting

Objetivo

"New aeronautical engine designs strive the manufacturers to use new processes which permit to add specific features such as stiffeners, often leading to weight or lead time saving. Electron Beam Melting (EBM) process is potential candidate but is not yet fully understood and controlled because of its lack of maturity. Case studies show that the waste of raw material is reduced by up to 40% when using Additive Manufacturing (AM) technologies - such as EBM - instead of subtractive (machining) technologies. It is due to the capacity of AM technologies to build parts directly from 3D models.
For the aerospace parts, the reduction of the raw material consumption is essential, but mechanical properties must be guaranteed. One must guarantee that the recycled powder is comparable in all above mentioned aspects to fresh powder. Also, the differences that may appear between fresh and recycled powder must not interfere in mechanical performance of functional parts built of recycled powder. So far, no specific criteria exist in terms powder recyclability such as the number of manufacturing. Also, no study of recyclability has been published.
AEROBEAM is aimed at investigating the mechanical properties of aeronautical Ti6Al4V stator vanes elaborated by EBM. During this project, optimization of build parameters, characterization of processed material, characterization of recycled powder and characterization of material processed out of recycled powder will be performed. The results aim at ensuring that the stator vanes built in WP5 are completely reliable regarding aeronautical requirements and can be equally used no matter if vanes are built from fresh or recycled powder as long as the powder is below its maximum level of recyclability."

Convocatoria de propuestas

SP1-JTI-CS-2012-01
Consulte otros proyectos de esta convocatoria

Coordinador

ASOCIACION DE INVESTIGACION DE LAS INDUSTRIAS METALMECANICAS, AFINES Y CONEXAS
Aportación de la UE
€ 84 924,00
Dirección
PARQUE TECNOLOGICO VALENCIA - AVDA. LEONARDO DA VINCI 38
46980 PATERNA
España

Ver en el mapa

Tipo de actividad
Research Organisations
Contacto administrativo
Noelia Antequera (Mrs.)
Enlaces
Coste total
Sin datos

Participantes (1)