Low cost design approach through simulations and manufacture of new mould concepts for very high tolerance composite components

Project Information

ACCUBLADE

Grant agreement ID: 338543

Project closed

Start date 1 May 2013

End date 30 June 2015

Funded under

• Specific Programme "Cooperation": Joint Technology Initiatives

Total cost € 397 255,00

EU contribution € 297 940,75

Coordinated by

FUNDACION CIDAUT
Spain

Objective

The main objective of the ACCUBLADE project, within the Green Rotorcraft Program is the development of a low cost and high accurate moulding process for the manufacturing of rotor blades incorporating an Active Gurney Flap mechanism what would contribute for greener rotorcraft performances with reduced fuel consumption and noise.

Fields of science

CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques.

• engineering and technology › mechanical engineering › vehicle engineering › aerospace engineering › aircraft › rotorcraft
• engineering and technology › environmental engineering › energy and fuels

Programme(s)

• FP7-JTI - Specific Programme "Cooperation": Joint Technology Initiatives

Topic(s)

• JTI-CS-2012-3-GRC-01-011 - Low cost design approach through simulation and manufacture of new mould concepts for very high tolerance composite components

Call for proposal

SP1-JTI-CS-2012-03
See other projects for this call

Funding Scheme

JTI-CS - Joint Technology Initiatives - Clean Sky

Coordinator

FUNDACION CIDAUT

• EU contribution: € 297 940,75
• Address: PLAZA VICENTE ALEIXANDRE CAMPOS 2 PQ TECNOLOGICO DE BOECILLO 209 ; 47151 Valladolid ; Spain
• Region: Centro (ES) › Castilla y León › Valladolid
• Activity type: Research Organisations
• Administrative Contact: María Teresa Fernández Peña (Dr.)
• Total cost: No data