Objetivo
"Li-ion technologies initiated in the 90’ at a fast development pace thanks mainly to emerging ICTs with more than 20 GWh sold in 2010. Soon, it appeared as a credible technology for electrical vehicles as it could provide average energy densities of about 140 Wh/kg. However and since then,major breakthroughs have been expected to reach higher storage levels of 250 Wh/kg on battery system level with an acceptable lifetime of 3000 cycles in order to develop an affordable economical business plan for car batteries.
MAT4BAT builds-up its EVs battery strategy on advanced materials and pilot line processes, proposing three novel concepts of cells initiating from a state-of-the art combination of cell materials (NMC/Carbonate liquid electrolyte/Graphite). MAT4BAT will address all critical ageing mechanisms associated to this technology and having direct impacts on product lifetime & safety by implementing two work programs for Battery Assessment (#1) and Battery Technologies (#2).
Program #1 will set a framework to define critical charging modalities for a battery system during practical use and associated testing tools & methods for relevant functional performance & lifetime assessment. Within this framework, the program #2 will implement three generations of cells with a focus on electrolytes which will be steadily transformed from Liquid to Gel to All-Solid state electrolytes in order to promote substantial gain in cell lifetime and safety by preventing degradations and hazards and improving energy density with a separator-free cell (all-solid state electrolyte).
100 state-of-the-art commercial cells will be assessed to define normal and critical charge/discharge conditions of testing with appropriate testing protocols. Besides,materials increments will be screened out on coin-cells prior a benchmarking of most promising materials at full cells level. Eventually,(10-40 A.h) prototypes will be produced to validate MAT4BAT best technologies against quantified objectives."
Ámbito científico
Convocatoria de propuestas
FP7-2013-GC-Materials
Consulte otros proyectos de esta convocatoria
Régimen de financiación
CP-IP - Large-scale integrating projectCoordinador
75015 PARIS 15
Francia
Ver en el mapa
Participantes (16)
2400 Mol
Ver en el mapa
20021 Bollate Mi
Ver en el mapa
70563 Stuttgart
Ver en el mapa
162 06 Praha 6
Ver en el mapa
76131 Karlsruhe
Ver en el mapa
6743 Bodio
Ver en el mapa
La participación finalizó
01013 VITORIA
Ver en el mapa
92100 Boulogne Billancourt
Ver en el mapa
01510 Minano Alava
Ver en el mapa
17000 LA ROCHELLE
Ver en el mapa
69621 Villeurbanne Cedex
Ver en el mapa
20014 San Sebastian
Ver en el mapa
31100 Toulouse
Ver en el mapa
22074 LOMAZZO
Ver en el mapa
NE1 7RU Newcastle Upon Tyne
Ver en el mapa
3364 Leudelange
Ver en el mapa