Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-06-18

ENhanced DURability materials for Advanced stacks of New solid oxide fuel CElls

Objetivo

"The project aims at developing reliable predictive models to estimate long-term (i.e. > 20 kh) performance and probability of failure of SOFC stacks based on existing materials and design produced by the industrial partners. This will allow the realization of stacks with extended service intervals and reduced maintenance cost with respect to the present stack technology. The extension of service life will be supported by the introduction of Early Warning Output Signals triggered counterstrategies. The project is structured into three phases: consolidation of knowledge and refinement of models on a previously operated State of Art stack (1st Loop); enhancement of materials, design and predictive models via iterative loops (Improvement Iterative Loop); statistical validation of achieved improvements via standard and accelerated tests (Validation Process). The stack is a system of interfaces/interphases giving rise to complex phenomena that which have to be separated in single phenomena processes. The ""single phenomena"" are generated by the minimum of interfaces/interphases in a quasi-independent way and therefore suitable for a separate deep investigation via micro-samples studies. The improvements will be especially validated by: the application of accelerated test protocols; the evaluation of robustness of stacks and components toward load cycles and thermal cycles. The comparison with an operating not cycled stack will give the value of performance (voltage) loss for the rated stack life cycle that has to be <5% for 100 load cycles (idle to rated load) or 50 thermal cycles (room temperature to operating temperature). The outcomes will be statistically demonstrated by operating 6 stacks in standard conditions and a minimum of 3 micro-sample per interphase in standard, cycled and accelerated conditions with constant monitoring via modelling."

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

FCH-JU-2013-1
Consulte otros proyectos de esta convocatoria

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

JTI-CP-FCH - Joint Technology Initiatives - Collaborative Project (FCH)

Coordinador

UNIVERSITA DEGLI STUDI DI GENOVA
Aportación de la UE
€ 440 204,00
Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos

Participantes (11)

Mi folleto 0 0