Ultra Low emission Technology Innovations for Mid-century Aircraft Turbine Engines

Resultado final

Achievements on SRIA environmental targets

An evaluation comparing the performance of ULTIMATE configurations to the SRIA environmental targets.

Public workshop linked to the Paris Air Show 2017 to present ULTIMATE results. All partners to contribute. Technology mock-ups will be prepared and presented as well

ULTIMATE public web site

Public website describing the project and presenting results (regularly updated throughout the project life).

Publicaciones

Analytical Model for the Performance Estimation of Pre-Cooled Pulse Detonation Turbofan Engines

Autores: Carlos Xisto, Fakhre Ali, Olivier Petit, Tomas Grönstedt, Andrew Rolt, Anders Lundbladh
Publicado en: Volume 1: Aircraft Engine; Fans and Blowers; Marine; Honors and Awards, 2017, Página(s) V001T01A016, ISBN 978-0-7918-5077-0
Editor: ASME
DOI: 10.1115/GT2017-63776

Structural Analysis of Profiled Tubes for a Turbofan Engine Supercritical-CO2 Bottoming Cycle Heat Exchanger

Autores: J. Rengel, F. Jacob, A. Rolt, V. Sethi
Publicado en: 2018
Editor: ASME

Aerodynamic and aeroacoustic comparison of optimized high-speed propeller blades

Autores: Alexandre Capitao Patrao, Daniel Lindblad, Tomas Grönstedt
Publicado en: 2018 Joint Propulsion Conference, 2018, ISBN 978-1-62410-570-8
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-4658

Implementation of a Quasi-Three-Dimensional Nonreflecting Blade Row Interface for Steady and Unsteady Analysis of Axial Turbomachines

Autores: Daniel Lindblad, Nathan A. Wukie, Gonzalo Montero Villar, Niklas Andersson
Publicado en: 2018 AIAA/CEAS Aeroacoustics Conference, 2018, ISBN 978-1-62410-560-9
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-4187

Aeroacoustic Analysis of a Counter Rotating Open Rotor based on the Harmonic Balance Method

Autores: Daniel Lindblad, Gonzalo Montero Villar, Niklas Andersson, Alexandre Capitao Patrao, Suk-kee Courty-Audren, Gaël Napias
Publicado en: 2018 AIAA Aerospace Sciences Meeting, 2018, ISBN 978-1-62410-524-1
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-1004

Selecting Combinations of Advanced Aero Engine Technologies

Autores: A. Rolt, J. Sebastiampillai, F. Jacob, V. Sethi, C. Xisto
Publicado en: 2017
Editor: ISABE

Investigation and Assessment of the Performance of Various Recuperative Cycles Based on the Intercooled Recuperation Concept

Autores: Christina Salpingidou, Zinon Vlahostergios, Dimitrios Misirlis, Michael Flouros, Fabian Donus, Kyros Yakinthos
Publicado en: Volume 3: Coal, Biomass, and Alternative Fuels; Cycle Innovations; Electric Power; Industrial and Cogeneration; Organic Rankine Cycle Power Systems, 2018, Página(s) V003T06A020, ISBN 978-0-7918-5104-3
Editor: ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition
DOI: 10.1115/GT2018-76778

Design Optimization of Heat Exchangers for Aero Engines With the Use of a Surrogate Model Incorporating Performance Characteristics and Geometrical Constraints

Autores: Christina Salpingidou, Dimitrios Misirlis, Zinon Vlahostergios, Michael Flouros, Fabian Donus, Kyros Yakinthos
Publicado en: Volume 5C: Heat Transfer, 2018, Página(s) V05CT22A004, ISBN 978-0-7918-5110-4
Editor: ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition
DOI: 10.1115/GT2018-76097

A Composite Cycle Engine Concept for Year 2050

Autores: Sascha Kaiser, Hagen Kellermann, Markus Nickl, Arne Seitz
Publicado en: 2018
Editor: 31st International Congress of the Aeronautical Sciences (ICAS) 2018

Assessment of CO2 and NOx emissions in intercooled pulsed detonation turbofan engines

Autores: Carlos Xisto, Olivier Petit, Tomas Grönstedt and Anders Lundbladh
Publicado en: 2018
Editor: ASME

Scale Effects on Conventional and Intercooled Turbofan Engine Performance

Autores: A. Rolt, V. Sethi, F. Jacob, J. Sebastiampillai, C. Xisto, T. Grönstedt, L. Raffaelli
Publicado en: 2017
Editor: ISABE

Investigations of Synergistic Combination of the Composite Cycle and Intercooled Recuperation

Autores: S. Kaiser, M. Nickl, C. Salpingidou, Z. Vlahostergios, S. Donnerhack, H. Klingels
Publicado en: 2017
Editor: 23rd International Symposium on Air Breathing Engines, ISABE

Conceptual design study of a geared turbofan and an open rotor aero engine with intercooled recuperated core

Autores: C Salpingidou, D Misirlis, Z Vlahostergios, M Flouros, F Donus, K Yakinthos
Publicado en: 2018, Página(s) 095441001877088
Editor: ASME

Ultra Low Emission Technology Innovations for Mid-Century Aircraft Turbine Engines

Autores: Tomas Grönstedt, Carlos Xisto, Vishal Sethi, Andrew Rolt, Nicolás García Rosa, Arne Seitz, Kyros Yakinthos, Stefan Donnerhack, Paul Newton, Nicolas Tantot, Oliver Schmitz, Anders Lundbladh
Publicado en: Volume 3: Coal, Biomass and Alternative Fuels; Cycle Innovations; Electric Power; Industrial and Cogeneration; Organic Rankine Cycle Power Systems, 2016, Página(s) V003T06A001, ISBN 978-0-7918-4974-3
Editor: ASME
DOI: 10.1115/GT2016-56123

Advanced Tube and Wing Aircraft for Year 2050 Timeframe

Autores: Philipp Heinemann, Periklis Panagiotou, Patrick Vratny, Sascha Kaiser, Mirko Hornung, Kyros Yakinthos
Publicado en: 55th AIAA Aerospace Sciences Meeting, 2017, ISBN 978-1-62410-447-3
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2017-1390

Validating the Harmonic Balance Method for Turbomachinery Tonal Noise Predictions

Autores: Daniel Lindblad, Niklas Andersson
Publicado en: 55th AIAA Aerospace Sciences Meeting, 2017, ISBN 978-1-62410-447-3
Editor: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2017-1171

ULTIMATE - Ultra Low emission Technology Innovations for Mid-century Aircraft Turbine Engines

Autores: T. Grönstedt
Publicado en: Aerospace Technology Congress 2016, Edición October 11-12 2016, 2016
Editor: Swedish Society of Aeronautics and Astronautics

A Search for the “ULTIMATE” Aero-Engine

Autores: C. Xisto and T. Grönstedt
Publicado en: LEMCOTEC Workshop for the Aeronautics Industry, Edición December 2016, 2016
Editor: LEMCOTEC Project

Lessons from Advanced Concept Studies in EU Framework Programmes

Autores: Andrew Rolt
Publicado en: 2017
Editor: Global Power and Propulsion Forum, Presentation for the Panel Session on Future Engine and Aircraft Technologies Towards Improved Environmental Performance

Multi-disciplinary Assessments of Novel Propulsion Technologies for Civil Aviation: Technoeconomic Enviromental Risk Assessment (TERA)

Autores: Vishal Sethi
Publicado en: 2017
Editor: Presentation for the Panel Session on Future Engine and Aircraft Technologies Towards Improved Environmental Performance, Global Power and Propulsion Forum, Zuric

Numerical Methods for Aeroacoustic Analysis of Turbomachinery

Autores: Daniel Lindblad
Publicado en: 2018
Editor: Chalmers Technika Hoegskola

3D LES - RANS CFD Studies of a Novel Secondary Combustor Concept for Low-NOx Emissions

Autores: Victor Martínez Bueno
Publicado en: 2018
Editor: Propulsion Engineering Centre, Cranfield University

Preliminary Design and Emissions Evaluation of an Aero Engine Secondary Combustor

Autores: Mirko Romanelli
Publicado en: 2018
Editor: Propulsion Engineering Centre, Cranfield University

Performance and Preliminary Design of Combined Cycle Aero Engines utilising Supercritical Carbon Dioxide

Autores: Florian Jacob
Publicado en: 2019
Editor: Propulsion Engineering Centre, Cranfield University

Investigation and Design of Power Transmission Systems for Novel Propulsion Technologies

Autores: Cánovas, Ahedo, O.
Publicado en: 2016
Editor: Propulsion Engineering Centre, Cranfield University

3D URANS Study of a Nutating Disc Engine Compressor

Autores: Luthfilaudri, N.
Publicado en: 2017
Editor: Propulsion Engineering Centre, Cranfield University

The efficiency of a pulsed detonation combustor–axial turbine integration

Autores: Carlos Xisto, Olivier Petit, Tomas Grönstedt, Andrew Rolt, Anders Lundbladh, Guillermo Paniagua
Publicado en: Aerospace Science and Technology, 2018, ISSN 1270-9638
Editor: Elsevier BV
DOI: 10.1016/j.ast.2018.08.038

Assessment of CO 2 and NO x Emissions in Intercooled Pulsed Detonation Turbofan Engines

Autores: Carlos Xisto, Olivier Petit, Tomas Grönstedt, Anders Lundbladh
Publicado en: Journal of Engineering for Gas Turbines and Power, Edición 141/1, 2019, Página(s) 011016, ISSN 0742-4795
Editor: American Society of Mechanical Engineers
DOI: 10.1115/1.4040741

Scale effects on conventional and intercooled turbofan engine performance

Autores: Andrew Rolt, Vishal Sethi, Florian Jacob, Joshua Sebastiampillai, Carlos Xisto, Tomas Grönstedt, Lorenzo Raffaelli
Publicado en: The Aeronautical Journal, Edición 121/1242, 2017, Página(s) 1162-1185, ISSN 0001-9240
Editor: Royal Aeronautical Society
DOI: 10.1017/aer.2017.38

The effect of turbine blade cooling on the performance of recuperative cycles for gas turbines applications

Autores: C. Salpingidou, D.Tsakmakidou, Z. Vlahostergios, D. Misirlis, M. Flouros
Publicado en: Chemical Engineering Transactions, Edición 61, 2017, Página(s) 1027-1032, ISSN 2283-9216
Editor: The Italian Association of Chemical Engineering
DOI: 10.3303/CET1761169

Efficient Optimization of Recuperator Design for Aero Engine Applications

Autores: K. Germakopoulos, C. Salpingidou, Z. Vlahostergios, D. Misirlis, M. Flouros, F. Donus, A. I. Papadopoulos, P. Seferlis, K. Yakinthos
Publicado en: Chemical Engineering Transactions, Edición 70, 2018, Página(s) 835-840, ISSN 2283-9216
Editor: The Italian Association of Chemical Engineering (AIDIC)
DOI: 10.3303/CET1870140

Investigations of the synergy of Composite Cycle and intercooled recuperation

Autores: Sascha Kaiser, Markus Nickl, Christina Salpingidou, Zinon Vlahostergios, Stefan Donnerhack, Hermann Klingels
Publicado en: The Aeronautical Journal, Edición 122/1252, 2018, Página(s) 869-888, ISSN 0001-9240
Editor: Royal Aeronautical Society
DOI: 10.1017/aer.2018.46

Performance of a Supercritical CO2 Bottoming Cycle for Aero Applications

Autores: Florian Jacob, Andrew Rolt, Joshua Sebastiampillai, Vishal Sethi, Mathieu Belmonte, Pedro Cobas
Publicado en: Applied Sciences, Edición 7/3, 2017, Página(s) 255, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app7030255

Resultado final

Publicaciones

Compartir esta página

Descargar