EXTREME Dynamic Loading - Pushing the Boundaries of Aerospace Composite Material Structures

Información del proyecto

EXTREME

Identificador del acuerdo de subvención: 636549

DOI

10.3030/636549

Proyecto cerrado

Fecha de la firma de la CE 17 Abril 2015

Fecha de inicio 1 Septiembre 2015

Fecha de finalización 31 Agosto 2019

Financiado con arreglo a

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Coste total

€ 5 277 597,50

Aportación de la UE

€ 5 277 597,50

Coordinado por

UNIVERSITY OF BATH
United Kingdom

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Websites, patent fillings, videos etc. (3)

EXTREME intranet Platform to share project data

Del 8.2 (month 4 update @24,36,48): EXTREME intranet Platform to share project data (Lead UBATH)

Impact Movie, short video presenting the EXTREME project

Del 8.5 (month 24 update @48): Impact Movie, short video presenting the EXTREME project (Lead TUD)

EXTREME website, to promote project result

Del 8.3 (month 6 update @24,36,48): EXTREME website, to promote project result (Lead UBATH)

Documents, reports (1)

Dissemination Activities

Del 8.1 (month 12 update @24,36,48): Report describing the dissemination activities (Publication in scientific journal and industrial magazines and conference proceeding) (Lead UPAT, E-XSTREAM)

Other (2)

EXTREME Conference organisation, final dissemination event

Del 8.6 (month 48): EXTREME Conference organisation, final dissemination event (Lead E-XSTREAM)

Project Leaflet, general presentation of EXTREME project

Del 8.4 (month 5 update @24): Project Leaflet, general presentation of EXTREME project (Lead UBATH)

Publicaciones

Peer reviewed articles (4)

Analysis of thermal strains and stresses in heated fibre metal laminates

Autores: A. G. Anisimov, B. Müller, J. Sinke, R. M. Groves
Publicado en: Strain, Edición 54/2, 2018, Página(s) e12260, ISSN 0039-2103
Editor: Blackwell Publishing Inc.
DOI: 10.1111/str.12260

Nonlinear air-coupled thermosonics for fatigue micro-damage detection and localisation

Autores: Artur Dyrwal, Michele Meo, Francesco Ciampa
Publicado en: NDT & E International, Edición 97, 2018, Página(s) 59-67, ISSN 0963-8695
Editor: Elsevier BV
DOI: 10.1016/j.ndteint.2018.03.012

Image processing based quantitative damage evaluation in composites with long pulse thermography

Autores: Zijun Wang, GuiYun Tian, Michele Meo, Francesco Ciampa
Publicado en: NDT & E International, Edición 99, 2018, Página(s) 93-104, ISSN 0963-8695
Editor: Elsevier BV
DOI: 10.1016/j.ndteint.2018.07.004

The Use of 2D and 3D High-Speed Digital Image Correlation in Full Field Strain Measurements of Composite Materials Subjected to High Strain Rates

Autores: Ahmed Elmahdy, Patricia Verleysen
Publicado en: Proceedings, Edición 2/8, 2018, Página(s) 538, ISSN 2504-3900
Editor: MDPI
DOI: 10.3390/ICEM18-05439

Conference proceedings (8)

EXTREME shearography: development of a high-speed shearography instrument for measurements of the surface strain components during an impact event

Autores: Andrei G. Anisimov, Roger M. Groves
Publicado en: Speckle 2018: VII International Conference on Speckle Metrology, 2018, Página(s) 34, ISBN 9781-510622982
Editor: SPIE
DOI: 10.1117/12.2318692

Novel simulation of composite material behavior subjected to hyper-velocity impact (HVI) and produced secondary debris by using smoothedparticle hydrodynamics code (SPH) methodology in LS-DYNA

Autores: Efthimios Giannaros , Athanasios Kotzakolios , Stavros Tsantzalis , Vassilis Kostopoulos *, 2 Gianni Campoli
Publicado en: 2017
Editor: DYNAmore GmbH

Tailored Embeddable Sensor-Actuator Layers for CFRP Aerospace Structures

Autores: Sandro NITSCHKE, Andreas HORNIG, Anja WINKLER, Niels MODLER
Publicado en: 10 th International Symposium on NDT in Aerospace, 2018
Editor: Creative Commons

COMPRESSIVE BEHAVIOR OF EPOXY RESIN FILLED WITH SILICA NANOPARTICLES AT HIGH STRAIN RATE

Autores: Mauro Zarrelli, Ahmed Elmahdy, Aldobenedetto Zotti, Simona Zuppolini, Anna Borriello and Patricia Verleysen
Publicado en: 18 th European Conference on Composite Materials, 2018
Editor: European Society for Composite Materials

Electro-Mechanical Test Rigs for Analysing Impact Induced Wave Propagation in Composite Materials

Autores: Sandro Nitschke, Andreas Hornig, Maik Gude
Publicado en: 18 th European Conference on Composite Materials, 2018
Editor: European Society for Composite Materials

Tensile Behavior of Basalt Fiber Reinforced Composites at High Strain Rates

Autores: Ahmed Elmahdy, Esther Feldman and Patricia Verleysen
Publicado en: Edición 18th European Conference on Composite Materials, 2018
Editor: European Society for Composite Materials

Extreme Fiber Sensing Capabilities for Composite Materials in Aerospace

Autores: Jonas Mertes, Michael Haverdings and Rolf Evenblij
Publicado en: 2018
Editor: European Society for Composite Materials

Fracture Toughness and Mechanical Characterization of Epoxy Nanocomposites based on Different Hyperbranched Polymers Typologies

Autores: A. Zotti, S. Zuppolini, M. Zarrelli and A. Borriello
Publicado en: Edición 18th European Conference on Composite Materials, 2018
Editor: European Society for Composite Materials

Non-peer reviewed articles (1)

Challenges related to testing of composite materials at high strain rates using the split Hopkinson bar technique

Autores: Ahmed Elmahdy, Patricia Verleysen
Publicado en: EPJ Web of Conferences, Edición 183, 2018, Página(s) 02021, ISSN 2100-014X
Editor: EDP Sciences
DOI: 10.1051/epjconf/201818302021

Book chapters (1)

Fracture Toughening Mechanisms in Epoxy Adhesives

Autores: Aldobenedetto Zotti, Simona Zuppolini, Mauro Zarrelli, Anna Borriello
Publicado en: Adhesives - Applications and Properties, 2016, ISBN 978-953-51-2783-3
Editor: InTech
DOI: 10.5772/65250