CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.
Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .
Resultado final
The document is the result of the work carried out in Task 3.4- standardized representation of KBE-systems, definition of interfaces, development of connections and semantic searches.
Analysis and Procedures for Secure data sharing across the P-S lifecycle (se abrirá en una nueva ventana)This document contains the results of Task 3.5 - how the data exchange among different data systems is secure and dinamic.
Combined Lifecycle Model for Collaborative Product-Service Engineering (se abrirá en una nueva ventana)It contains the results of Task 2.1 - describe the interactions between individual PL and SL phases, processes and stakeholeders.
Assessment planning (se abrirá en una nueva ventana)This deliverable is linked to Task 6.5 - the objective is the development of the assessment methodology of the Use Case Trials, regarding several aspects.
Concept for a Combined PLM/SLM Product-Service Lifecycle Management (se abrirá en una nueva ventana)It contains the results of the Task 2.2 - analysis and development of a concept for combined PLM/SLM.
Elicitation and structuration of engineering and business requirements (se abrirá en una nueva ventana)Results of Task 1.1 - first phase of requirements engineering process, identification and analysis of the real world requirements.
Tools and Procedures analysis for embedding and retrieving P-S lifecycle knowledge (se abrirá en una nueva ventana)Th output contains the output from Task 3.2 - a novel methodology for designing data-models that structure and exploit product-service data, static and dynamical.
Requirements validation (se abrirá en una nueva ventana)It is related to the work carried out in Task 1.4 - check that high level functionalities meets the needs arised in the use cases.
Methodologies and tools to involve customers in the P-S multi-disciplinary feedback (se abrirá en una nueva ventana)The document is linked to Task 3.3 - the main result is to enable flow of information from middle of life phase to beginning of life phase, meaning, to enable designers and manufacturers to benefit from information gathered during usage and exploitation (user behaviour, servicing, durability, etc.).
Report on P-S Engineering and Manufacturing ubiquitous Search Tools Development and Integration (se abrirá en una nueva ventana)The document contains the results of Task 4.4 - enabling the manufacturing intelligence layer to work on data coming from both digital design world and the Internet of Things and sensors world.
First Dissemination action plan and implementation report (se abrirá en una nueva ventana)The document is the first intermediate plan and implementation useful to disseminate Manutelligence results to both scientific and industrial communities and to promote and disseminate Manutelligence results during the entire project, both in terms of RTD results and of design community awareness.
Report on Collaborative Tools Integration and Customization (se abrirá en una nueva ventana)This document reports the results obtained in Task 4.1 - it contains the integration, customization and deployment of the collaborative design tools for the Manutelligence Platform.
Intermediate Dissemination action plan and implementation report (se abrirá en una nueva ventana)The document is the intermediate plan and implementation useful to disseminate Manutelligence results to both scientific and industrial communities and to promote and disseminate Manutelligence results during the entire project, both in terms of RTD results and of design community awareness.
Report on Manufacturing Context driven Intelligence Layer Development and Integration (se abrirá en una nueva ventana)This document is related to the activities carried out in Task 4.6 - the Virtual Obeya will be used to present data and information from the different tools. In order to achieve this, further developments on the tool are needed.
Standardization (se abrirá en una nueva ventana)The document is related to Task 8.1 - This task is particularly important for Manutelligence since standardization will enable easier integration and seamless communication between the various systems the IT Platform will interact with.
Final LCA & LCC Report (se abrirá en una nueva ventana)This document is related to Task 5.4 - it is a report concerning final considerations about the integration of LCA & LCC tools with the software tools used within Manutelligence.
Report on Specification and Implementation of tools for Product-Service LCC & LCA analysis (se abrirá en una nueva ventana)This document is related to Task 5.2 - development of tools for Product-Service centric LCA and LCC, based on the Manutelligence LCA & LCC model developed in T5.1.
Refinement and analysis of requirements (se abrirá en una nueva ventana)Result of Task 1.3 - verification of the previously elicitated requirements. It is a document containing the selected requirements.
Report on Process Design and Manufacturing Execution Design Tools Integration and Customization (se abrirá en una nueva ventana)It contains the results of Task 4.2 - the connection and the integration of the Manutelligence Platform with process design and execution tools is presented.
Final Dissemination action plan and implementation report (se abrirá en una nueva ventana)The document is the final implementation report used to disseminate Manutelligence results to both scientific and industrial communities and to promote and disseminate Manutelligence results during the entire project, both in terms of RTD results and of design community awareness.
LCC & LCA model including initial LCI (se abrirá en una nueva ventana)The document contains the results of Task 5.1 - In this activity the analysis of different sources of knowledge relevant to the combined lifecycles of Product-Services will be performed, in order to elaborate a suitable model for the scheduled cradle-to-grave Lifecycle Assessment (LCA) and Lifecycle Costing (LCC).
Application and Evaluation of Product-Service Lifecycle Engineering and Management Tools and Methods (se abrirá en una nueva ventana)It is related to work carried out in Task 2.4 - through workshops the processes are analysed in details, models and tools are applied and evaluated.
Publicaciones
Autores:
Karl A. Hribernik, Klaus Dieter Thoben, Thorsten Wuest, Stefan Wellsandt, Elaheh Nabati
Publicado en:
International Journal of Product Lifecycle Management, Edición 9/4, 2016, Página(s) 353, ISSN 1743-5110
Editor:
Inderscience Publishers
DOI:
10.1504/IJPLM.2016.10001874
Autores:
Dirk Lehmhus, Thorsten Wuest, Stefan Wellsandt, Stefan Bosse, Toshiya Kaihara, Klaus-Dieter Thoben, Matthias Busse
Publicado en:
Sensors, Edición 15/12, 2015, Página(s) 32079-32122, ISSN 1424-8220
Editor:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/s151229905
Autores:
Marco Dal Lago, Donatella Corti, Stefan Wellsandt
Publicado en:
Procedia CIRP, Edición 64, 2017, Página(s) 73-78, ISSN 2212-8271
Editor:
Elsevier
DOI:
10.1016/j.procir.2017.03.017
Autores:
Konstantinos Stylidis, Monica Rossi, Casper Wickman, Rikard Söderberg
Publicado en:
Procedia CIRP, Edición 50, 2016, Página(s) 553-558, ISSN 2212-8271
Editor:
Elsevier
DOI:
10.1016/j.procir.2016.04.062
Autores:
Stefan Wellsandt, Karl Hribernik, Klaus-Dieter Thoben
Publicado en:
Procedia CIRP, Edición 36, 2015, Página(s) 242-247, ISSN 2212-8271
Editor:
Elsevier
DOI:
10.1016/j.procir.2015.01.060
Autores:
Donatella Corti, Alessandro Fontana, Federico Montorsi
Publicado en:
Procedia CIRP, Edición 47, 2016, Página(s) 300-304, ISSN 2212-8271
Editor:
Elsevier
DOI:
10.1016/j.procir.2016.03.033
Autores:
Daniele Cerri, Sergio Terzi
Publicado en:
Procedia CIRP, Edición 47, 2016, Página(s) 114-119, ISSN 2212-8271
Editor:
Elsevier
DOI:
10.1016/j.procir.2016.03.212
Autores:
Tapani Ryynänen, Iris Karvonen, Heidi Korhonen, Kim Jansson
Publicado en:
IFIP Advances in Information and Communication Technology, Edición 506, 2017, Página(s) 138-145, ISBN 978-3-319-65150-7
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-65151-4_13
Autores:
Laura Cattaneo, Monica Rossi, Elisa Negri, Daryl Powell, Sergio Terzi
Publicado en:
Product Lifecycle Management and the Industry of the Future, Edición 517, 2017, Página(s) 371-381, ISBN 978-3-319-72904-6
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-72905-3_33
Autores:
Tapani Ryynänen, Iris Karvonen, Heidi Korhonen, Kim Jansson
Publicado en:
Collaboration in a Hyperconnected World, Edición 480, 2016, Página(s) 340-349, ISBN 978-3-319-45389-7
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-45390-3_29
Autores:
Marco Seregni, Claudio Sassanelli, Daniele Cerri, Cristiano Zanetti, Sergio Terzi
Publicado en:
2016 IEEE 2nd International Forum on Research and Technologies for Society and Industry Leveraging a better tomorrow (RTSI), 2016, Página(s) 1-5, ISBN 978-1-5090-1131-5
Editor:
IEEE
DOI:
10.1109/RTSI.2016.7740631
Autores:
Monica Rossi, Laura Cattaneo, Julien Le Duigou, Stéphane Fugier-Garrel, Sergio Terzi, Benoît Eynard
Publicado en:
Product Lifecycle Management for Digital Transformation of Industries, Edición 492, 2016, Página(s) 183-192, ISBN 978-3-319-54660-5
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-54660-5_17
Autores:
Karvonen I., Ryynänen T., Jansson K., Korhonen H.
Publicado en:
DESIGN 2016 – PROCEEDINGS, 2016, Página(s) 281-290, ISSN 1847-9073
Editor:
Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, The Design Society
Autores:
Sassanelli, Claudio; Seregni, Marco; Hankammer, Stephan; Cerri, Daniele; Terzi, Sergio
Publicado en:
Proceedings of the Summer School Francesco Turco, Edición 1, 2016, Página(s) 36-41, ISSN 2283-8996
Editor:
AIDI - Italian Association of Industrial Operations Professors
DOI:
10.5281/zenodo.204660
Autores:
Jansson, K., Karvonen, I., Ryynänen, T., Korhonen, H., Corti, D., Cerri, D., Cocco, M
Publicado en:
Proceedings of International Conference on Engineering, Technology and Innovation/IEEE International Technology Management Conference ICE/ITMC, 2016
Editor:
Proceeding IEEE
Autores:
Laura Cattaneo, Daniele Cerri, Sergio Terzi, Stefan Wellsandt, Klaus-Dieter Thoben
Publicado en:
2017 International Conference on Engineering, Technology and Innovation (ICE/ITMC), 2017, Página(s) 865-871, ISBN 978-1-5386-0774-9
Editor:
IEEE
DOI:
10.1109/ICE.2017.8279974
Autores:
Stefan Wellsandt, Christian Norden, Reinhard Ahlers, Sergio Terzi, Daniele Cerri, Donatella Corti, Klaus-Dieter Thoben
Publicado en:
2017 International Conference on Engineering, Technology and Innovation (ICE/ITMC), 2017, Página(s) 858-864, ISBN 978-1-5386-0774-9
Editor:
IEEE
DOI:
10.1109/ICE.2017.8279973
Autores:
Stefan Wellsandt, Karl Hribernik, Klaus-Dieter Thoben
Publicado en:
2015 IEEE International Conference on Engineering, Technology and Innovation/ International Technology Management Conference (ICE/ITMC), 2015, Página(s) 1-9, ISBN 978-1-4673-7156-8
Editor:
IEEE
DOI:
10.1109/ICE.2015.7438641
Autores:
Daniele Cerri, Sergio Terzi
Publicado en:
Product Lifecycle Management in the Era of Internet of Things, 2016, Página(s) 554-561, ISBN 978-3-319-33111-9
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-33111-9_50
Autores:
Monica Rossi, Sergio Terzi
Publicado en:
Product Lifecycle Management in the Era of Internet of Things, 2016, Página(s) 103-111, ISBN 978-3-319-33111-9
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-33111-9_10
Autores:
Thorsten Wuest, Stefan Wellsandt, Klaus-Dieter Thoben
Publicado en:
Product Lifecycle Management in the Era of Internet of Things, 2016, Página(s) 826-834, ISBN 978-3-319-33111-9
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-33111-9_75
Autores:
Stefan Wellsandt, Thorsten Wuest, Karl Hribernik, Klaus-Dieter Thoben
Publicado en:
Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth, 2015, Página(s) 515-523, ISBN 978-3-319-22756-6
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-22756-6_63
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles