Skip to main content

Turning waste from steel industry into a valuable low cost feedstock for energy intensive industry

Deliverables

Communication plan

Communication plan

Exploitation workshops

Exploitation workshops

Report on criticality analysis for selected elements

Report on criticality analysis for selected elements

Report on potential markets and applications for the extracted elements and the remaining slag

Report on potential markets and applications for the extracted elements and the remaining slag

ICT tool for mapping waste streams generated from steel industries to potential end users

ICT tool for mapping waste streams generated from steel industries to potential end users

Website and communication material

Website and communication material

Searching for OpenAIRE data...

Publications

Nuevas vías de valorización de las escorias negras de acería como material de almacenamiento térmico para diversas aplicaciones industriales

Author(s): IK4-Azterlan (Erika garitaonandia, Lucia Unamunzaga) CIC-Energigune (Iñigo Ortega) Arcelor Mittal (Fermin Agreda)
Published in: SIDEREX Magazine, Issue Every 3 months No.12, 2018, Page(s) 8-9
DOI: 10.5281/zenodo.1476005

Nuevas aplicaciones industriales de alto valor añadido para las escorias negras de acerías

Author(s): Lucia Unamunzaga - IK4 Azterlan Iñigo Ortega - CIC Energigune
Published in: INTEREMPRESAS Magazine, Issue Every month. 2018/8. No.1410, 2018, Page(s) 46-48
DOI: 10.5281/zenodo.1476022

SUSTAINABLE SOLUTIONS FOR THE ENERGY INDUSTRY

Author(s): Javier Rodríguez Aseguinolaza
Published in: Impact, 2017
DOI: 10.5281/zenodo.1475965

Turning waste from steel industry into a valuable low cost feedstock for energy intensive industry

Author(s): Javier Rodríguez-Aseguinolaza
Published in: European Ennergy Innovation, 2017
DOI: 10.5281/zenodo.1475942

LCA in the EU project: benefits & opportunities

Author(s): Eleonora Vannuzi; Massimo De Pieri
Published in: Life Cycle Innovation Conference 2018 (LCIC 2018), 2018
DOI: 10.5281/zenodo.1475928

Slag as Inventory Material for a Thermal Energy Storage (TES): Material investigation and thermo-mechanical consideration

Author(s): J. Haunstetter; M. Krüger; P. Knödler; S. Zunft
Published in: Global Slag Conference, 2018
DOI: 10.5281/zenodo.1475896

VALORIZATION OF THE STEEL INDUSTRY SLAG AND BY-PRODUCTS AS RAW MATERIAL ASSET FOR INNOVATIVE REFRACTORIES

Author(s): Marjaana Karhu, Patrycja Piotrowska, Bob Talling, Jasmin Hum, Aldo R. Boccaccini, Pertti Lintunen
Published in: 10th International Conference on the Environmental and Technical Implications of Construction with Alternative Materials WASCON 2018 – No Cradle, No Grave – Circular Economy into Practice June 6-8, 2018, Tampere, Finland Conference proceedings, 2018
DOI: 10.5281/zenodo.1475991

Steel industry slag valorization as raw material asset for insulating refractories

Author(s): Jasmin Hum, Marjaana Karhu , Patrycja Piotrowska, Bob Talling, Pertti Lintunen and Aldo R. Boccaccini
Published in: 93rd Annual meeting of the German Ceramic Society (DKG) & Symposium on High-Performance Ceramics 2018, 2018
DOI: 10.5281/zenodo.1475977

Guidelines for an optimized design and management of packed-bed sensible thermal energy storage systems

Author(s): Iñigo Ortega-Fernández; Irantzu Uriz; Asier Ortuondo; Ana Belén Hernández; Abdessamad Faik; Iñaki Loroño; Javier Rodríguez-Aseguinolaza; Bruno D'Aguanno
Published in: ASME Power & Energy 2017, 2017
DOI: 10.5281/zenodo.1475921

Operational strategies guideline for packed bed thermal energy storage systems

Author(s): Iñigo Ortega-Fernández; Irantzu Uriz; Asier Ortuondo; Ana Belén Hernandez; Abdessamad Faik; Iñaki Loroño; Javier Rodríguez-Aseguinolaza
Published in: 14TH INTERNATIONAL CONFERENCE ON ENERGY STORAGE (EnerSTOCK2018), 2018
DOI: 10.5281/zenodo.1475894

Characterisation of steel industry slag suitability as raw material for refractory castables

Author(s): Marjaana Karhu, Pertti Lintunen, Juha Lagerbom, Tomi Lindroos
Published in: 5th International Slag Valorisation Symposium, 2017
DOI: 10.5281/zenodo.1475950

RESLAG: Recycling von Stahlwerksschlacken

Author(s): Nothacker K., Homm G., Stauber, R.
Published in: Recy & DepoTech 2018 Conference, 2018

Slag as an Inventory Material for Heat Storage in a Concentrated Solar Tower Power Plant: Experimental studies on design and performance of the thermal energy storage

Author(s): Michael Krüger, Jürgen Haunstetter, Stefan Zunft
Published in: International Renewable Energy Storage Conference (IRES 2019), 2019

Slag as an Inventory Material for Heat Storage in a Concentrated Solar Tower Power Plant: Experimental studies on design and performance of the thermal energy storage

Author(s): Haunstetter, Jürgen and Krüger, Michael and Zunft, Stefan
Published in: SolarPACES Conference, 2018

Final results of experimental studies on design and performance of Thermal Energy Storages (TES) using slag as a heat storage material

Author(s): Jürgen Haunstetter, Michael Krüger, Stefan Zunft
Published in: Global Slag Conference, 2019

Slag as inventory material for regenerator-type heat storage in solar tower power plants

Author(s): Michael Krüger, Jürgen Haunstetter, Stefan Zunft
Published in: NEWSOL Symposium, 2018

Slag as heat storage material for concentrated solar power plants (CSP) using air as heat transfer fluid (HTF)

Author(s): Jürgen Haunstetter, Michael Krüger, Stefan Zunft
Published in: Turning steel waste into value, 2018

Experimental investigation of the thermal and mechanical stability of rocks for high-temperature thermal-energy storage

Author(s): Viola Becattini, Thomas Motmans, Alba Zappone, Claudio Madonna, Andreas Haselbacher, Aldo Steinfeld
Published in: Applied Energy, Issue 203, 2017, Page(s) 373-389, ISSN 0306-2619
DOI: 10.1016/j.apenergy.2017.06.025

Constrained multi-objective optimization of thermocline packed-bed thermal-energy storage

Author(s): Jan Marti, Lukas Geissbühler, Viola Becattini, Andreas Haselbacher, Aldo Steinfeld
Published in: Applied Energy, Issue 216, 2018, Page(s) 694-708, ISSN 0306-2619
DOI: 10.1016/j.apenergy.2017.12.072

Slag as Inventory Material for a Thermal Energy Storage (TES): Material investigation and thermo-mechanical consideration

Author(s): Michael Krüger, Jürgen Haunstetter, Philipp Knödler, Stefan Zunft
Published in: Energy Procedia, Issue 155, 2018, Page(s) 454-463, ISSN 1876-6102
DOI: 10.1016/j.egypro.2018.11.034

Slag as an Inventory Material for Heat Storage in a Concentrated Solar Tower Power Plant: Design Studies and Systematic Comparative Assessment

Author(s): Michael Krüger, Jürgen Haunstetter, Philipp Knödler, Stefan Zunft
Published in: Applied Sciences, Issue 9/9, 2019, Page(s) 1833, ISSN 2076-3417
DOI: 10.3390/app9091833

Analysis of steel making slag pebbles as filler material for thermocline tanks in a hybrid thermal energy storage system

Author(s): Francisco Cabello Núñez, Javier López Sanz, Fritz Zaversky
Published in: Solar Energy, Issue 188, 2019, Page(s) 1221-1231, ISSN 0038-092X
DOI: 10.1016/j.solener.2019.07.036

Benchmarking analysis of a novel thermocline hybrid thermal energy storage system using steelmaking slag pebbles as packed-bed filler material for central receiver applications

Author(s): Javier López Sanz, Francisco Cabello Nuñez, Fritz Zaversky
Published in: Solar Energy, Issue 188, 2019, Page(s) 644-654, ISSN 0038-092X
DOI: 10.1016/j.solener.2019.06.028

Next Generation of Concentrated Solar Power Technologies

Author(s): Tatiana Loureiro, Raymond Sterling, Claudio Testani, Elena Torralba-Calleja, Luca Turchetti, Manuel Blanco, Alain Ferriere, Fabrizio Perrotta
Published in: Proceedings, Issue 20/1, 2019, Page(s) 7, ISSN 2504-3900
DOI: 10.3390/proceedings2019020007