AdaPtive micROfluidic- and nano-enabled smart systems for waTEr qUality Sensing

Deliverables

Other (1)

Project website

Public website operational.

Documents, reports (12)

Final version of smart system co-design

This report will include the final design specifications of the whole system as outcome of all WP2 tasks for the second design phase

Manufacturability plan

First version of manufacturability analysis (plan)for PROTEUS smart-system

Report on 2nd phase validation, including energy, sensing, reliability, model deployment

This report includes the second validation results based on lab and model deployment

First version of smart system co-design

This report will include the design specifications of the whole system as outcome of all WP2 tasks for the first design phase

Use case description

Description of use cases scenarios/high level requirements and of the validation plan

Technology Transfer Directory

This report will detail the technology transfer plan.

Requirements and Exploitation Strategy

Together with the overall requirements, this deliverable will contain the initial exploitation strategy with a particular focus on European and worldwide consultation meetings.

Mid project report on dissemination and exploitation

This report will present a break-down of the dissemination and exploitation activities carried out during the first half of the project, and any updates to the data management plan.

Requirements analysis

List of requirements coming from tasks 1.2-1.3, applying to the PROTEUS smart-system

End project report on dissemination and exploitation

This report will present a break-down of the dissemination and exploitation activities carried out during the second half of the project, and any updates to the data management plan.

Report on 1st phase validation, including energy, sensing, reliability, model deployment

This report includes the first validation results based on lab and model deployment

Field Test final report

Report with a complete description of the field test program and detailed compilation of obtained experimental data.

Open Research Data Pilot (1)

Data management plan

This report will present in detail which data is available to the public, as part of the open data pilot.

Publications

Peer reviewed articles (1)

Effect of boundary conditions on piezoelectric buckled beams for vibrational noise harvesting

Author(s): F. Cottone, M. Mattarelli, H. Vocca, L. Gammaitoni
Published in: The European Physical Journal Special Topics, 224/14-15, 2015, Page(s) 2855-2866, ISSN 1951-6355
Publisher: EDP Sciences
DOI: 10.1140/epjst/e2015-02593-5

Thesis dissertations (2)

Wireless Nano Sensors for Embedded Durability Monitoring in Concrete

Author(s): Fulvio Michelis
Published in: October 2015, 2015
Publisher: Ecole Polytechnique

Wideband CMOS Low Noise Amplifiers

Author(s): Ivan Bastos
Published in: Phd Thesis, December 2015, 2015
Publisher: FCT-UNL

Conference proceedings (4)

Improving the efficiency of a 2∶1 SC DC-DC converter using the parasitic capacitances

Author(s): Ricardo Madeira, Nuno Paulino
Published in: 2015 Conference on Design of Circuits and Integrated Systems (DCIS), 2015, Page(s) 1-5, ISBN 978-1-4673-7228-2
Publisher: IEEE
DOI: 10.1109/DCIS.2015.7388607

A low voltage low power temperature sensor using a 2nd order delta-sigma modulator

Author(s): Filipe Quendera, Nuno Paulino
Published in: 2015 Conference on Design of Circuits and Integrated Systems (DCIS), 2015, Page(s) 1-6, ISBN 978-1-4673-7228-2
Publisher: IEEE
DOI: 10.1109/DCIS.2015.7388608

A Multi-cell SC DC-DC Converter Contrôler with Power Aware Output Ripple Reduction

Author(s): Ricardo Madeira, João P. Oliveira, and Nuno Paulino
Published in: 12th Conference on PhD Research in Microelectronics and Electronics, June 2016, 2016
Publisher: FCT-UNL

Gm-C Biquad Filter for Low Signal Sensor Applications

Author(s): Richa Arya, João P. Oliveira
Published in: Mixed Design of Integrated Circuits & Systems (MIXDES), 2016
Publisher: FCT-UNL