Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS

AdaPtive micROfluidic- and nano-enabled smart systems for waTEr qUality Sensing

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Final version of smart system co-design (se abrirá en una nueva ventana)

This report will include the final design specifications of the whole system as outcome of all WP2 tasks for the second design phase

Manufacturability plan (se abrirá en una nueva ventana)

First version of manufacturability analysis (plan)for PROTEUS smart-system

Report on 2nd phase validation, including energy, sensing, reliability, model deployment (se abrirá en una nueva ventana)

This report includes the second validation results based on lab and model deployment

First version of smart system co-design (se abrirá en una nueva ventana)

This report will include the design specifications of the whole system as outcome of all WP2 tasks for the first design phase

Use case description (se abrirá en una nueva ventana)

Description of use cases scenarios/high level requirements and of the validation plan

Technology Transfer Directory (se abrirá en una nueva ventana)

This report will detail the technology transfer plan.

Requirements and Exploitation Strategy (se abrirá en una nueva ventana)

Together with the overall requirements, this deliverable will contain the initial exploitation strategy with a particular focus on European and worldwide consultation meetings.

Mid project report on dissemination and exploitation (se abrirá en una nueva ventana)

This report will present a break-down of the dissemination and exploitation activities carried out during the first half of the project, and any updates to the data management plan.

Requirements analysis (se abrirá en una nueva ventana)

List of requirements coming from tasks 1.2-1.3, applying to the PROTEUS smart-system

End project report on dissemination and exploitation (se abrirá en una nueva ventana)

This report will present a break-down of the dissemination and exploitation activities carried out during the second half of the project, and any updates to the data management plan.

Report on 1st phase validation, including energy, sensing, reliability, model deployment (se abrirá en una nueva ventana)

This report includes the first validation results based on lab and model deployment

Field Test final report (se abrirá en una nueva ventana)

Report with a complete description of the field test program and detailed compilation of obtained experimental data.

Data management plan (se abrirá en una nueva ventana)

This report will present in detail which data is available to the public, as part of the open data pilot.

Publicaciones

Effect of boundary conditions on piezoelectric buckled beams for vibrational noise harvesting (se abrirá en una nueva ventana)

Autores: F. Cottone, M. Mattarelli, H. Vocca, L. Gammaitoni
Publicado en: The European Physical Journal Special Topics, Edición 224/14-15, 2015, Página(s) 2855-2866, ISSN 1951-6355
Editor: EDP Sciences
DOI: 10.1140/epjst/e2015-02593-5

Wireless Nano Sensors for Embedded Durability Monitoring in Concrete

Autores: Fulvio Michelis
Publicado en: Edición October 2015, 2015
Editor: Ecole Polytechnique

Wideband CMOS Low Noise Amplifiers

Autores: Ivan Bastos
Publicado en: Phd Thesis, Edición December 2015, 2015
Editor: FCT-UNL

Improving the efficiency of a 2∶1 SC DC-DC converter using the parasitic capacitances (se abrirá en una nueva ventana)

Autores: Ricardo Madeira, Nuno Paulino
Publicado en: 2015 Conference on Design of Circuits and Integrated Systems (DCIS), 2015, Página(s) 1-5, ISBN 978-1-4673-7228-2
Editor: IEEE
DOI: 10.1109/DCIS.2015.7388607

A low voltage low power temperature sensor using a 2nd order delta-sigma modulator (se abrirá en una nueva ventana)

Autores: Filipe Quendera, Nuno Paulino
Publicado en: 2015 Conference on Design of Circuits and Integrated Systems (DCIS), 2015, Página(s) 1-6, ISBN 978-1-4673-7228-2
Editor: IEEE
DOI: 10.1109/DCIS.2015.7388608

A Multi-cell SC DC-DC Converter Contrôler with Power Aware Output Ripple Reduction

Autores: Ricardo Madeira, João P. Oliveira, and Nuno Paulino
Publicado en: 12th Conference on PhD Research in Microelectronics and Electronics, Edición June 2016, 2016
Editor: FCT-UNL

Gm-C Biquad Filter for Low Signal Sensor Applications

Autores: Richa Arya, João P. Oliveira
Publicado en: Mixed Design of Integrated Circuits & Systems (MIXDES), 2016
Editor: FCT-UNL

Buscando datos de OpenAIRE...

Se ha producido un error en la búsqueda de datos de OpenAIRE

No hay resultados disponibles

Mi folleto 0 0