Skip to main content

The Integration of Novel Aerospace Technologies

Searching for OpenAIRE data...

Publications

Thermal analysis of fault tolerant electrical machines for MEA applications

Author(s): Vincenzo Madonna
Published in: The Journal of Engineering, Issue Issue 13, 2018, 2018, Page(s) 461-467, ISSN 2051-3305
DOI: 10.1049/joe.2018.0040

FINITE STATE MACHINE CONTROL FOR AIRCRAFT ELECTRICAL DISTRIBUTION SYSTEM

Author(s): Cosimo Spagnolo
Published in: The Journal of Engineering, Issue Issue 13, 2018, 2018, Page(s) 506 – 511, ISSN 2051-3305
DOI: 10.1049/joe.2018.0039

Review, Challenges, and Future Developments of Electric Taxiing Systems

Author(s): Milos Lukic, Paolo Giangrande, Ahmed Hebala, Stefano Nuzzo, Michael Galea
Published in: IEEE Transactions on Transportation Electrification, Issue 5/4, 2019, Page(s) 1441-1457, ISSN 2332-7782
DOI: 10.1109/tte.2019.2956862

Experimental and numerical determination of the wave dispersion characteristics of complex 3D woven composites

Author(s): V. Thierry, O. Mesnil, D. Chronopoulos
Published in: Ultrasonics, Issue 103, 2020, Page(s) 106068, ISSN 0041-624X
DOI: 10.1016/j.ultras.2020.106068

Multi-scale wave propagation modelling for two-dimensional periodic textile composites

Author(s): V. Thierry, L. Brown, D. Chronopoulos
Published in: Composites Part B: Engineering, Issue 150, 2018, Page(s) 144-156, ISSN 1359-8368
DOI: 10.1016/j.compositesb.2018.05.052

Thermal Overload and Insulation Aging of Short Duty Cycle, Aerospace Motors

Author(s): Vincenzo Madonna, Paolo Giangrande, Luca Lusuardi, Andrea Cavallini, Chris Gerada, Michael Galea
Published in: IEEE Transactions on Industrial Electronics, Issue 67/4, 2020, Page(s) 2618-2629, ISSN 0278-0046
DOI: 10.1109/tie.2019.2914630

Electrical Power Generation in Aircraft: Review, Challenges, and Opportunities

Author(s): Vincenzo Madonna, Paolo Giangrande, Michael Galea
Published in: IEEE Transactions on Transportation Electrification, Issue 4/3, 2018, Page(s) 646-659, ISSN 2332-7782
DOI: 10.1109/tte.2018.2834142

Improved Thermal Management and Analysis for Stator End-Windings of Electrical Machines

Author(s): Vincenzo Madonna, Adam Walker, Paolo Giangrande, Giovanni Serra, Chris Gerada, Michael Galea
Published in: IEEE Transactions on Industrial Electronics, Issue 66/7, 2019, Page(s) 5057-5069, ISSN 0278-0046
DOI: 10.1109/tie.2018.2868288

Novel 24-slots14-poles fractional-slot concentrated winding topology with low-space harmonics for electrical machine

Author(s): Shaohong Zhu, Tom Cox, Zeyuan Xu, Chris Gerada
Published in: The Journal of Engineering, Issue 2019/17, 2019, Page(s) 3784-3788, ISSN 2051-3305
DOI: 10.1049/joe.2018.8085

Novel cutting inserts with multi-channel irrigation at the chip-tool interface: Modelling, design and experiments

Author(s): Zhirong Liao, Dongdong Xu, Dragos Axinte, Rachid M'Saoubi, Jimmy Thelin, Anders Wretland
Published in: CIRP Annals, Issue Not yet assigned, 2020, ISSN 0007-8506
DOI: 10.1016/j.cirp.2020.04.028

Deep Learning with Dynamically Weighted Loss Function for Sensor-Based Prognostics and Health Management

Author(s): Divish Rengasamy, Mina Jafari, Benjamin Rothwell, Xin Chen, Grazziela P. Figueredo
Published in: Sensors, Issue 20/3, 2020, Page(s) 723, ISSN 1424-8220
DOI: 10.3390/s20030723

Electromagnetic shielding effectiveness of carbon fibre reinforced composites

Author(s): D. Munalli, G. Dimitrakis, D. Chronopoulos, S. Greedy, A. Long
Published in: Composites Part B: Engineering, Issue 173, 2019, Page(s) 106906, ISSN 1359-8368
DOI: 10.1016/j.compositesb.2019.106906

Study on the characterisation of the PTFE transfer film and the dimensional designing of surface texturing in a dry-lubricated bearing system

Author(s): Liang Ding, Dragos Axinte, Paul Butler-Smith, Ali Abdelhafeez Hassan
Published in: Wear, Issue 448-449, 2020, Page(s) 203238, ISSN 0043-1648
DOI: 10.1016/j.wear.2020.203238

A quick method for evaluating the thresholds of workpiece surface damage in machining

Author(s): Dongdong Xu, Zhirong Liao, Dragos Axinte, Mark Hardy, Rachid M’Saoubi
Published in: CIRP Annals, Issue 68/1, 2019, Page(s) 61-64, ISSN 0007-8506
DOI: 10.1016/j.cirp.2019.03.015

A novel method to continuously map the surface integrity and cutting mechanism transition in various cutting conditions

Author(s): Dongdong Xu, Zhirong Liao, Dragos Axinte, Mark Hardy
Published in: International Journal of Machine Tools and Manufacture, Issue 151, 2020, Page(s) 103529, ISSN 0890-6955
DOI: 10.1016/j.ijmachtools.2020.103529

Model-Based Autonomous Navigation with Moment of Inertia Estimation for Unmanned Aerial Vehicles

Author(s): Hery Mwenegoha, Terry Moore, James Pinchin, Mark Jabbal
Published in: Sensors, Issue 19/11, 2019, Page(s) 2467, ISSN 1424-8220
DOI: 10.3390/s19112467

Experimental study of radial lip seals with different sleeve coatings

Author(s): Sarah Shabbir, Seamus D. Garvey, Sam M. Dakka, Benjamin C. Rothwell
Published in: Sealing Technology, Issue 2020/3, 2020, Page(s) 5-10, ISSN 1350-4789
DOI: 10.1016/s1350-4789(20)30091-x

Comparative study of novel tubular flux-reversal transverse flux permanent magnet linear machine

Author(s): Shaohong Zhu, Tom Cox, Chris Gerada
Published in: 2017 IEEE Energy Conversion Congress and Exposition (ECCE), 2017, Page(s) 4282-4287
DOI: 10.1109/ECCE.2017.8096739

Comparative study and optimal design of alternative PM configuration transverse flux linear machine

Author(s): Shaohong Zhu, Tom Cox, Chris Gerada, Zeyuan Xu
Published in: 2017 20th International Conference on Electrical Machines and Systems (ICEMS), 2017, Page(s) 1-6
DOI: 10.1109/ICEMS.2017.8056164

A Design Guide of Direct Matrix Converter Open Circuit Online Fault Diagnosis in Industrial Applications

Author(s): Jiawei Zhang, Lee Empringham, Liliana De Lillo, Patrick Wheeler, Cosimo Spagnolo
Published in: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society, 2018, Page(s) 859-864
DOI: 10.1109/iecon.2018.8591701

Advanced smart grid power distribution system for More Electric Aircraft application

Author(s): Cosimo Spagnolo, Sharmila Sumsurooah, Serhiy Bozkho
Published in: 2019 International Conference on Electrotechnical Complexes and Systems (ICOECS), 2019, Page(s) 1-6
DOI: 10.1109/icoecs46375.2019.8949998

Smart Controller Design for Safety Operation of the MEA Electrical Distribution System

Author(s): Cosimo Spagnolo, Sharmila Sumsurooah, Christopher Ian Hill, Serhiy Bozhko
Published in: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society, 2018, Page(s) 5778 - 5785
DOI: 10.1109/iecon.2018.8591132

An Intelligent Toolkit for Benchmarking Data-Driven Aerospace Prognostics

Author(s): Divish Rengasamy, Jimiama M Mase, Benjamin Rothwell, Grazziela P. Figueredo
Published in: 2019 IEEE Intelligent Transportation Systems Conference (ITSC), 2019, Page(s) 4210 - 4215
DOI: 10.1109/itsc.2019.8917115

Deep Learning Approaches to Aircraft Maintenance, Repair and Overhaul: A Review

Author(s): Divish Rengasamy, Hervé P. Morvan, Grazziela P. Figueredo
Published in: 2018 21st International Conference on Intelligent Transportation Systems (ITSC), 2018, Page(s) 150 - 156
DOI: 10.1109/itsc.2018.8569502

Analysis of Energy Storage System Requirements for Aircraft Electric Taxiing Operations

Author(s): Milos Lukic, Paolo Giangrande, Christian Klumpner, Michael Galea
Published in: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, 2019, Page(s) 2616 - 2621
DOI: 10.1109/iecon.2019.8926797

Modelling and Analysis of an Aircraft On-board Electric Taxiing System

Author(s): Milos Lukic, Paolo Giangrande, Christian Klumpner, Michael Galea
Published in: 2019 22nd International Conference on Electrical Machines and Systems (ICEMS), 2019, Page(s) 1-6
DOI: 10.1109/icems.2019.8921709

State of the Art of Electric Taxiing Systems



DOI: 10.1109/esars-itec.2018.8607786

Generator overload reduction using smart power management



DOI: 10.1109/esars-itec.2018.8607289

Reduced Order Lumped Parameter Thermal Network for Dual Three-Phase Permanent Magnet Machines

Author(s): P. Giangrande, V. Madonna, S. Nuzzo, C. Spagnolo, C. Gerada, M. Galea
Published in: 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), 2019, Page(s) 71-76
DOI: 10.1109/wemdcd.2019.8887772

Design Considerations of Fault-Tolerant Electromechanical Actuator Systems for More Electric Aircraft (MEA)

Author(s): Shaohong Zhu, Tom Cox, Zeyuan Xu, Chris Gerada, Chen Li
Published in: 2018 IEEE Energy Conversion Congress and Exposition (ECCE), 2018, Page(s) 4607-4613
DOI: 10.1109/ecce.2018.8557426

On the Effects of Advanced End-Winding Cooling on the Design and Performance of Electrical Machines

Author(s): Vincenzo Madonna, Paolo Giangrande, Adam Walker, Michael Galea
Published in: 2018 XIII International Conference on Electrical Machines (ICEM), 2018, Page(s) 311-317
DOI: 10.1109/icelmach.2018.8507170

Insulation Capacitance as Diagnostic Marker for Thermally Aged, Low Voltage Electrical Machines

Author(s): Vincenzo Madonna, Paolo Giangrande, Weiduo Zhao, Yinli Wang, He Zhang, Michael Galea
Published in: 2019 22nd International Conference on Electrical Machines and Systems (ICEMS), 2019, Page(s) 1-5
DOI: 10.1109/icems.2019.8921657

Optimized LV loads allocation for MEA electrical power systems

Author(s): Cosimo Spagnolo, Vincenzo Madonna, Sharmila Sumsurooah, Christopher Ian Hill, Serhiy Bozhko
Published in: AIAA Propulsion and Energy 2019 Forum, 2019
DOI: 10.2514/6.2019-4489

On the Thermal Insulation Qualification of Low Voltage Electrical Machines

Author(s): Vincenzo Madonna, Paolo Giangrande, Giovanni Migliazza, Giampaolo Buticchi, Michael Galea
Published in: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, 2019, Page(s) 7115-7120
DOI: 10.1109/iecon.2019.8927464

Reliability vs. Performances of Electrical Machines: Partial Discharges Issue

Author(s): Vincenzo Madonna, Paolo Giangrande, Weiduo Zhao, Giampaolo Buticchi, He Zhang, Chris Gerada, Michael Galea
Published in: 2019 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), 2019, Page(s) 77-82
DOI: 10.1109/wemdcd.2019.8887809

Design and Testing of PMSM for Aerospace EMA Applications

Author(s): P. Giangrande, V. Madonna, G. Sala, A. Kladas, C. Gerada, M. Galea
Published in: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society, 2018, Page(s) 2038-2043
DOI: 10.1109/iecon.2018.8591318

Electromagnetic shielding effectiveness of fiber-reinforced composites: a preliminary study

Author(s): Daniela Munalli, Dimitrios Chronopoulos, Steve Greedy
Published in: 9th European Workshop on Structural Health Monitoring, 2018

The use of free-space microwave non-destructive techniques: simulation of damage detection in carbon fibre reinforced composites

Author(s): Daniela Munalli, Georgios Dimitrakis, Dimitrios Chronopoulos, Steve Greedy, Andrew Long
Published in: 11th Symposium on NDT in Aerospace, 2019

Wave scattering in coupled composite plates

Author(s): Nurkanat Aimakov, Gregor Tanner, Dimitrios Chronopoulos
Published in: NOVEM (NOise and Vibration Emerging Methods) 2018, 2018, Page(s) 421 - 431

Wave scattering in coupled composite plates

Author(s): Nurkanat Aimakov, Gregor Tanner, Dimitrios Chronopoulos
Published in: 48th International Congress and Exhibition on Noise Control Engineering, 2019, Page(s) 4389 - 4400

Identifying Aircraft Passenger Postures and Factors Influencing Body Part Discomfort

Author(s): Mahnaz Sharafkhani, Elizabeth Argyle, Sue Cobb, Paul Tennent, Robert Houghton
Published in: 2nd International Comfort Congress, 2019

A Novel Methodology to Quantify the Shape Complexity of Composite Aerospace Parts

Author(s): Mohammad Tanvir Chowdhury, Thomas Turner
Published in: 22nd International Conference on Composites Materials (ICCM22), 2019, Page(s) 3032-3039

Enhanced Fixed Wing UAV Navigation in Extended GNSS Outages using a Vehicle Dynamics Model and Raw GNSS Observables

Author(s): Hery A. Mwenegoha, Terry Moore, James Pinchin, Mark Jabbal
Published in: Proceedings of the 32nd International Technical Meeting of the Satellite Division of The Institute of Navigation (ION GNSS+ 2019), 2019, Page(s) 2552-2565
DOI: 10.33012/2019.17056

Heat Transfer of Couette Flow in Micro-channels: an Analytical Model of Seals

Author(s): Sarah Shabbir, Seamus D. Garvey, Sam M. Dakka, Benjamin C. Rothwell
Published in: 25th International Conference on Fluid Sealing 2020, 2020

Aerospace Sealing Technology for Maintenance, Repair and Overhaul of engines: a review

Author(s): Sarah Shabbir, Seamus D. Garvey, Sam M. Dakka
Published in: International Society of Air Breathing Engines (ISABE) 24th Conference 2019, 2019

Reliability Analysis of aircraft starter generator drive converter

Author(s): Jayakrishnan Harikumaran, Giampaolo Buticchi, Michael Galea, Alessandro Costabeber, Pat Wheeler
Published in: 2019 IEEE 15th Brazilian Power Electronics Conference and 5th IEEE Southern Power Electronics Conference (COBEP/SPEC), 2019, Page(s) 1-6
DOI: 10.1109/cobep/spec44138.2019.9065643

ON THE EXPERIMENTAL VALIDATION OF THE NUMERICAL CALCULATION OF THE DISPERSION RELATIONS OF COMPLEX WOVEN COMPOSITES

Author(s): Victor Thierry, Olivier Mesnil, Dimitrios Chronopoulos
Published in: Proceedings of the 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2015), 2019, Page(s) 5913-5920
DOI: 10.7712/120119.7356.19988

QUANTIFICATION OF GUIDED WAVE INTERACTION EFFECTS WITH LOCALISED STRUCTURAL NONLINEARITIES IN COMPLEX, COMPOSITE STRUCTURES

Author(s): Victor Thierry, Dimitrios Chronopoulos, I. Ashcroft
Published in: Proceedings of the 6th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2015), 2017, Page(s) 4766-4777
DOI: 10.7712/120117.5760.17000

ON THE EXPERIMENTAL VALIDATION OF THE WAVE PROPAGATION MODELLING FOR TWO-DIMENSIONAL PERIODIC TEXTILE COMPOSITES

Author(s): V. Thierry, O. Mesnil, D. Chronopoulos
Published in: 22nd International Conference on Composites Materials (ICCM22), 2019, Page(s) 4437-4442

Impact of the mesoscale structure of periodic textile composites on wave propagation

Author(s): Victor Thierry, Louise Brown
Published in: AIP Conference Proceedings volume 1981, Issue 1981, 2018, Page(s) 020014
DOI: 10.1063/1.5045876