Solid Oxide Stack Lean Manufacturing

Objectif

The proposed SOSLeM project will contribute to the call objectives by improving production processes as well as developing and applying novel manufacturing technologies for FC stacks. The improvements proposed by the project will sum up to a reduction of manufacturing costs of about 70%, leading to decreased capital cost of about 2.500 €/kW.
Besides these outstanding economical and technical improvements, production material will be spared and environmental benefits will be realized. Specifically, the project will:
- Develop new and optimized processes for cassettes production, by avoidance brushing of cassettes, improved sealing adhesion on cassettes, automation of welding, lean manufacturing processes and anode contact layer laser welding,
- Improve stack preparation, by advanced glass curing and stack conditioning and improved gas stations,
- Enable environmental benefits by Cu-based instead of Co-based powder and evaluation of On-site Nickel removal from waste water
- Reduce production time and costs and improve flexibility, by large furnace arrangement, introduction of a multi-stack production station, examination of substituting Co-based powder by Cu-based power,
Examination of partially substituting Co-based powder by enamel coating and simultaneous sintering.

Champ scientifique

• /ingénierie et technologie/génie électrique, génie électronique, génie de l’information/industrie électrotechnique/ingénierie énergétique/transmission d’électricité
• /sciences naturelles/sciences physiques/optique/physique des lasers
• /ingénierie et technologie/ingénierie des materiaux/revêtement et films
• /ingénierie et technologie/génie de l'environnement/énergie et combustibles/énergie renouvelable/énergie éolienne
• /sciences sociales/économie et affaires/économie/économie de la production
• /ingénierie et technologie/génie électrique, génie électronique, génie de l’information/industrie électrotechnique/systèmes d’automatisation et de contrôle
• /ingénierie et technologie/génie de l'environnement/gestion des déchets/eau usée
• /sciences naturelles/sciences chimiques/chimie inorganique/composés inorganiques

Programme(s)

• H2020-EU.3.3.8.1. - Increase the electrical efficiency and the durability of the different fuel cells used for power production to levels which can compete with conventional technologies, while reducing costs

Thème(s)

• FCH-02.6-2015 - Development of cost effective manufacturing technologies for key components or fuel cell systems

Appel à propositions

H2020-JTI-FCH-2015-1
Voir d’autres projets de cet appel

Régime de financement

FCH2-RIA - Research and Innovation action

Coordinateur

SOLIDPOWER SPA

Adresse

Viale Trento 115/117
38017 Mezzolombardo Tn
Italie

Type d’activité

Private for-profit entities (excluding Higher or Secondary Education Establishments)

Contribution de l’UE

€ 604 375

Participants (5)

AVL LIST GMBH

Autriche

Contribution de l’UE

€ 403 500

Adresse

Hans-list-platz 1
8020 Graz

Type d’activité

Private for-profit entities (excluding Higher or Secondary Education Establishments)

Athena S.p.a

Italie

Contribution de l’UE

€ 771 667,50

Adresse

Via Delle Albere,13
36045 Alonte

Type d’activité

Private for-profit entities (excluding Higher or Secondary Education Establishments)

ECOLE POLYTECHNIQUE FEDERALE DE LAUSANNE

Suisse

Contribution de l’UE

€ 0

Adresse

Batiment Ce 3316 Station 1
1015 Lausanne

Type d’activité

Higher or Secondary Education Establishments

GREENLIGHT INNOVATION GMBH

Allemagne

Contribution de l’UE

€ 214 758,75

Adresse

Muhlenstrasse 15
77866 Rheinau

Type d’activité

Private for-profit entities (excluding Higher or Secondary Education Establishments)

SOLIDPOWER SA

Suisse

Contribution de l’UE

€ 0

Adresse

Avenue Des Sports 26
1400 Yverdon-les-bains

Type d’activité

Private for-profit entities (excluding Higher or Secondary Education Establishments)