Solid Oxide Stack Lean Manufacturing

Resultado final

Documents, reports (1)

1st Report on the identification of relevant failure modes and their frequencies fingerprint

1st Report on the identification of relevant failure modes and their frequencies fingerprint

Other (2)

Project website

Project website

Project presentation and brochure (for distribution)

Project presentation and brochure (for distribution)

Publicaciones

Peer reviewed articles (2)

Ex-situ experimental benchmarking of solid oxide fuel cell metal interconnects

Autores: Manuel Bianco, Johan Tallgren, Jong-Eun Hong, Shicai Yang, Olli Himanen, Jyrki Mikkola, Jan Van herle, Robert Steinberger-Wilckens
Publicado en: Journal of Power Sources, 437, 2019, Page(s) 226900, ISSN 0378-7753
Editor: Elsevier BV
DOI: 10.1016/j.jpowsour.2019.226900

Model-assisted identification of solid oxide cell elementary processes by electrochemical impedance spectroscopy measurements

Autores: P. Caliandro, A. Nakajo, S. Diethelm, J. Van herle
Publicado en: Journal of Power Sources, 436, 2019, Page(s) 226838, ISSN 0378-7753
Editor: Elsevier BV
DOI: 10.1016/j.jpowsour.2019.226838

Thesis dissertations (2)

Analysis of High Temperature Degradation of Alloys in Solid Oxide Fuel Cell

Autores: Bianco, Manuel ; Van Herle, Jan ; Diethelm, Stefan
Publicado en: 2019
Editor: EPFL
DOI: 10.5075/epfl-thesis-9086

Identification of Solid Oxide Cell Elementary Processes by Electrochemical Impedance

Autores: Caliandro, Priscilla ; Van Herle, Jan ; Diethelm, Stefan
Publicado en: 2018
Editor: EPFL
DOI: 10.5075/epfl-thesis-8389