Towards a Reliable Model for Dark Matter Search Experiments

Información del proyecto

SABRE

Identificador del acuerdo de subvención: 703650

DOI

10.3030/703650

Proyecto finalizado el 14 Agosto 2017

Fecha de la firma de la CE 19 Abril 2016

Fecha de inicio 1 Julio 2016

Fecha de finalización 30 Junio 2018

Financiado con arreglo a

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Coste total

€ 195 454,80

Aportación de la UE

€ 195 454,80

Coordinado por

IMPERIAL COLLEGE OF SCIENCE TECHNOLOGY AND MEDICINE
United Kingdom

Periodic Reporting for period 1 - SABRE (Towards a Reliable Model for Dark Matter Search Experiments)

Período documentado: 2016-07-01 hasta 2018-06-30

Resumen del contexto y de los objetivos generales del proyecto

The SABRE experiment aims to detect dark matter particles through an annual modulation of their interaction rate using thallium-doped sodium iodide (NaI(Tl)) crystals. To fully understand the detector response to a dark matter signal or background radiation, end-to-end simulations are essential: The aim of this project was to include the interaction of the incoming particle/radiation with the detector, signal dispersion and collection including a full optical model, as well as the subsequent processing by the data acquisition electronics. Measurements with a high-purity crystal during the proof of-principle phase will allow their intrinsic radiopurity to be fully characterized, which is a key input to the simulation. A measurement of the optical properties of the materials involved was another crucial part of the end-to-end simulation software. Using these results, we can also optimize the light collection efficiency of the detector and, with that, the sensitivity of the full-scale experiment.

Trabajo realizado desde el comienzo del proyecto hasta el final del período abarcado por el informe y los principales resultados hasta la fecha

During the first half of the project, good progress was achieved in all work packages. For the software package, I focused on the Monte Carlo simulations to reproduce the interaction of signal and background with the detector. Such an interaction typically produces light in our setup, which then gets detected by photomultiplier tubes (PMTs). The replication of the PMT response was another important part of the recent work.
Furthermore, I worked with two Master’s students on a setup to measure the reflectivity of different materials. These measurements are important to a) decide, which ones to use in the experiment for an optimum light collection efficiency and b) to then be able to simulate how light travels through the detector. The work also included first optical simulations.

A measurement of the temperature dependency of the scintillation light from sodium iodide crystals was conducted together with Queen’s University, Canada. The initial data analysis shows some interesting effects; final evaluations are still ongoing.

We made good progress in reducing the radioactive contamination inside the NaI(Tl) crystals. However, we still experience problems scaling the procedure up to the required crystal size.

Avances que van más allá del estado de la técnica e impacto potencial esperado (incluida la repercusión socioeconómica y las implicaciones sociales más amplias del proyecto hasta la fecha)

The beneficiary received an offer from Switzerland and decided to accept it. As a result, thie fellowship was terminated.

sabre.png