Friction stir processing based local damage mitigation and healing in aluminium alloys

Información del proyecto

ALUFIX

Identificador del acuerdo de subvención: 716678

DOI

10.3030/716678

Proyecto cerrado

Fecha de la firma de la CE 21 Noviembre 2016

Fecha de inicio 1 Enero 2017

Fecha de finalización 31 Diciembre 2022

Financiado con arreglo a

• EXCELLENT SCIENCE - European Research Council (ERC)

Coste total

€ 1 497 446,89

Aportación de la UE

€ 1 497 446,89

Coordinado por

UNIVERSITE CATHOLIQUE DE LOUVAIN
Belgium

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Publicaciones

Peer reviewed articles (33)

Avoiding abnormal grain growth in thick 7XXX aluminium alloy friction stir welds during T6 post heat treatments

Autores: Matthieu B. Lezaack, Aude Simar
Publicado en: Materials Science and Engineering: A, Edición 807, 2021, Página(s) 140901, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2021.140901

Efficient optimization methodology for laser powder bed fusion parameters to manufacture dense and mechanically sound parts validated on AlSi12 alloy

Autores: Julie Gheysen, Matthieu Marteleur, Camille van der Rest, Aude Simar
Publicado en: Materials & Design, Edición 199, 2021, Página(s) 109433, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2020.109433

Design of a metallic glass dispersion in pure copper by friction stir processing

Autores: Marie-Noëlle Avettand-Fènoël, Nelson Netto, Aude Simar, M. Marinova, Roland Taillard
Publicado en: Journal of Alloys and Compounds, Edición 27(6), 2022, Página(s) 164522, ISSN 0925-8388
Editor: Elsevier BV
DOI: 10.1016/j.jallcom.2022.164522

Manufacturing high strength aluminum matrix composites by friction stir processing: An innovative approach

Autores: Nelson Netto, Lv Zhao, Jeroen Soete, Grzegorz Pyka, Aude Simar
Publicado en: Journal of Materials Processing Technology, Edición 283, 2020, Página(s) 116722, ISSN 0924-0136
Editor: Elsevier BV
DOI: 10.1016/j.jmatprotec.2020.116722

A new physical simulation tool to predict the interface of dissimilar aluminum to steel welds performed by friction melt bonding

Autores: T. Sapanathan, N. Jimenez-Mena, I. Sabirov, M.A. Monclús, J.M. Molina-Aldareguía, P. Xia, L. Zhao, A. Simar
Publicado en: Journal of Materials Science & Technology, Edición 35/9, 2019, Página(s) 2048-2057, ISSN 1005-0302
Editor: Allerton Press Inc.
DOI: 10.1016/j.jmst.2019.05.004

Fatigue crack nucleation and growth in laser powder bed fusion AlSi10Mg under as built and post-treated conditions

Autores: Juan Guillermo Santos Macías, Chola Elangeswaran, Lv Zhao, Jean-Yves Buffière, Brecht Van Hooreweder, Aude Simar
Publicado en: Materials and Design, Edición 210, 110084, 2021, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2021.110084

Fostering crack deviation via local internal stresses in Al/NiTi composites and its correlation with fracture toughness

Autores: Lv Zhao, Lipeng Ding, Jeroen Soete, Hosni Idrissi, Greet Kerckhofs, Aude Simar
Publicado en: Composites Part A: Applied Science and Manufacturing, Edición 126, 2019, Página(s) 105617, ISSN 1359-835X
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.105617

Nanoscale periodic gradients generated by laser powder bed fusion of an AlSi10Mg alloy

Autores: Williams Lefebvre, Grégory Rose, Pauline Delroisse, Eric Baustert, Fabien Cuvilly, Aude Simar
Publicado en: Materials & Design, Edición 197, 2021, Página(s) 109264, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2020.109264

Unveiling damage sites and fracture path in laser powder bed fusion AlSi10Mg: Comparison between horizontal and vertical loading directions

Autores: Lv Zhao, Juan Guillermo Santos Macías, Thierry Douillard, Zhenhuan Li, Aude Simar
Publicado en: Materials Science and Engineering: A, Edición 807, 2021, Página(s) 140845, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2021.140845

On the formation of antiphase boundaries in Fe4Al13 intermetallics during a high temperature treatment

Autores: Lipeng Ding, Thaneshan Sapanathan, Dominique Schryvers, Aude Simar, Hosni Idrissi
Publicado en: Scripta Materialia, Edición 215, 2022, Página(s) 114726, ISSN 1359-6462
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2022.114726

Hot isostatic pressing of laser powder bed fusion AlSi10Mg: parameter identification and mechanical properties

Autores: Juan Guillermo Santos Macías; Lv Zhao; David Tingaud; Brigitte Bacroix; Grzegorz Pyka; Camille van der Rest; Laurence Ryelandt; Aude Simar
Publicado en: Journal of Materials Science, Vol. Special issue on Additive Manufacturing (2022), Edición 4, 2022, ISSN 1573-4803
Editor: Springer
DOI: 10.1007/s10853-022-07027-9

Understanding the ductility versus toughness and bendability decoupling of large elongated and fine grained Al 7475 - T6 alloy

Autores: Matthieu B. Lezaack, Florent Hannard, Aude Simar
Publicado en: Material Science and Engineering A, Edición 839, 2022, Página(s) 142816, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2022.142816

On the complete interface development of Al/Cu magnetic pulse welding via experimental characterizations and multiphysics numerical simulations

Autores: Jisuai S. Li, Thaneshan Sapanathan, R.N. Raoelison, Y.L. Hou, Aude Simar, M. Rachik
Publicado en: Journal of Materials Processing Technology, Edición 296, 117185, 2021, ISSN 0924-0136
Editor: Elsevier BV
DOI: 10.1016/j.jmatprotec.2021.117185

Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions

Autores: Lv Zhao, Juan Guillermo Santos Macías, Lipeng Ding, Hosni Idrissi, Aude Simar
Publicado en: Materials Science and Engineering: A, Edición 764, 2019, Página(s) 138210, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2019.138210

Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg

Autores: Juan Guillermo Santos Macías, Thierry Douillard, Lv Zhao, Eric Maire, Grzegorz Pyka, Aude Simar
Publicado en: Acta Materialia, Edición 201, 2020, Página(s) 231-243, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2020.10.001

A new healing strategy for metals: Programmed damage and repair

Autores: Mariia Arseenko, Florent Hannard, Lipeng Ding, Lv Zhao, Eric Maire, Julie Villanova, Hosni Idrissi and Aude Simar
Publicado en: Acta Materialia, Edición 238, 2022, Página(s) 118241, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2022.118241

Mean-field model analysis of deformation and damage in friction stir processed Mg-C composites

Autores: Aude Simar, Anne Mertens, Sophie Ryelandt, Francis Delannay, Laurence Brassart
Publicado en: Materials Science and Engineering: A, Edición 723, 2018, Página(s) 324-333, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2018.03.043

On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding

Autores: N. Jimenez-Mena, P. J. Jacques, J. M. Drezet, A. Simar
Publicado en: Metallurgical and Materials Transactions A, Edición 49/7, 2018, Página(s) 2692-2704, ISSN 1073-5623
Editor: ASM International
DOI: 10.1007/s11661-018-4618-z

Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches

Autores: Yasin Amani, Sylvain Dancette, Pauline Delroisse, Aude Simar, Eric Maire
Publicado en: Acta Materialia, Edición 159, 2018, Página(s) 395-407, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2018.08.030

Residual stresses of friction melt bonded aluminum/steel joints determined by neutron diffraction

Autores: N. Jimenez-Mena, T. Sapanathan, J.M. Drezet, T. Pirling, P.J. Jacques, A. Simar
Publicado en: Journal of Materials Processing Technology, Edición 266, 2019, Página(s) 651-661, ISSN 0924-0136
Editor: Elsevier BV
DOI: 10.1016/j.jmatprotec.2018.11.030

Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing

Autores: Juan Guillermo Santos Macías, Chola Elangeswaran, Lv Zhao, Brecht Van Hooreweder, Jérôme Adrien, Eric Maire, Jean-Yves Buffière, Wolfgang Ludwig, Pascal J. Jacques, Aude Simar
Publicado en: Scripta Materialia, Edición 170, 2019, Página(s) 124-128, ISSN 1359-6462
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2019.05.044

On the interplay between intermetallic controlled growth and hot tearing susceptibility in Al-to-steel welding with additional interlayers

Autores: N. Jimenez-Mena, A. Simar, P.J. Jacques
Publicado en: Materials & Design, Edición 180, 2019, Página(s) 107958, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2019.107958

Unveiling the impact of the effective particles distribution on strengthening mechanisms: A multiscale characterization of Mg+Y2O3 nanocomposites

Autores: C. Mallmann, F. Hannard, E. Ferrié, A. Simar, R. Daudin, P. Lhuissier, A. Pacureanu, M. Fivel
Publicado en: Materials Science and Engineering: A, Edición 764, 2019, Página(s) 138170, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2019.138170

Ductilization of selective laser melted Ti6Al4V alloy by friction stir processing

Autores: Chunjie Huang, Xingchen Yan, Lv Zhao, Min Liu, Wenyou Ma, Weibing Wang, Jeroen Soete, Aude Simar
Publicado en: Materials Science and Engineering: A, Edición 755, 2019, Página(s) 85-96, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2019.03.133

Enhancement of toughness of Al-to-steel Friction Melt Bonded welds via metallic interlayers

Autores: Norberto Jimenez-Mena, Pascal J. Jacques, Lipeng Ding, Nicolas Gauquelin, Dominique Schryvers, Hosni Idrissi, Francis Delannay, Aude Simar
Publicado en: Materials Science and Engineering: A, Edición 740-741, 2019, Página(s) 274-284, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/J.MSEA.2018.10.101

Comparison of residual stresses obtained by the crack compliance method for parts produced by different metal additive manufacturing techniques and after friction stir processing

Autores: Lv Zhao, Juan Guillermo Santos Macías, Adrien Dolimont, Aude Simar, Edouard Rivière-Lorphèvre
Publicado en: Additive Manufacturing, Edición 36, 2020, Página(s) 101499, ISSN 2214-8604
Editor: Elsevier BV
DOI: 10.1016/j.addma.2020.101499

Property prediction and crack growth behavior in cold sprayed Cu deposits

Autores: Chunjie Huang, Mariia Arseenko, Lv Zhao, Yingchun Xie, Andreas Elsenberg, Frank Gaertner, Aude Simar, Thomas Klassen
Publicado en: Materials and Design, Edición 206, 109826, 2021, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2021.109826

High temperature in situ SEM assessment followed by ex situ AFM and EBSD investigation of the nucleation and early growth stages of Fe-Al intermetallics

Autores: T. Sapanathan, I. Sabirov, P. Xia, M.A. Monclús, J.M. Molina-Aldareguía, P.J. Jacques, A. Simar
Publicado en: Scripta Materialia, Edición 200, 2021, Página(s) 113910, ISSN 1359-6462
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.scriptamat.2021.113910

Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution

Autores: A. Heidarzadeh, S. Mironov, R. Kaibyshev, G. Çam, A. Simar, A. Gerlich, F. Khodabakhshi, A. Mostafaei, D.P. Field, J.D. Robson, A. Deschamps, P.J. Withers
Publicado en: Progress in Materials Science, 2020, Página(s) 100752, ISSN 0079-6425
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.pmatsci.2020.100752

Microstructure and loading direction dependent hardening and damage behavior of laser powder bed fusion AlSi10Mg

Autores: Lubin Song, Lv Zhao, Lipeng Ding, Yaxin Zhu, Minsheng Huang, Aude Simar, Zhenhuan Li
Publicado en: Material Science and Engineering A, Edición 2022, 832, 2022, Página(s) 142484, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2021.142484

Towards ductilization of high strength 7XXX aluminium alloys via microstructural modifications obtained by friction stir processing and heat treatments

Autores: Matthieu Baudouin Lezaack; Florent Hannard; Lv Zhao; Lv Zhao; A. Orekhov; A. Orekhov; Jérôme Adrien; Arttu Miettinen; Arttu Miettinen; Arttu Miettinen; Hosni Idrissi; Hosni Idrissi; Aude Simar
Publicado en: Materialia, Edición 101248, 2021, ISSN 2589-1529
Editor: Elsevier
DOI: 10.1016/j.mtla.2021.101248

Combined numerical and experimental estimation of the fracture toughness and failure analysis of single lap shear test for dissimilar welds

Autores: Norberto Jimenez-Mena; Thaneshan Sapanathan; Pascal Jacques; Aude Simar
Publicado en: Engineering Fracture Mechanics, Edición 249, 107756, 2021, ISSN 0013-7944
Editor: Pergamon Press Ltd.
DOI: 10.48550/arxiv.2104.13506

Review on the correlation between microstructure and mechanical performance for laser powder bed fusion AlSi10Mg

Autores: Lv Zhao, Lubin Song, Juan Guillermo Santos Macías, Yaxin Zhu, Minsheng Huang, Aude Simar, Zhenhuan Li
Publicado en: Additive Manufacturing, Edición 56, 2022, Página(s) 102914, ISSN 2214-8604
Editor: Elsevier BV
DOI: 10.1016/j.addma.2022.102914

Book chapters (1)

Friction Stir Processing for Architectured Materials

Autores: Aude Simar, Marie-Noëlle Avettand-Fènoël
Publicado en: Architectured Materials in Nature and Engineering - Archimats, Edición 282, 2019, Página(s) 195-229, ISBN 978-3-030-11941-6
Editor: Springer International Publishing
DOI: 10.1007/978-3-030-11942-3_7

Other (2)

Lightening the load of aluminium alloys, vulgarisation paper

Autores: Aude Simar
Publicado en: EU Researcher, Edición summer 2020, 2020, Página(s) 59
Editor: EU Researcher

Extended durability for high strength aluminium alloys, vulgarisation paper

Autores: Aude Simar, Florent Hannard, Matthieu B. Lezaack, Juan Guillermo Santos Macías, Lv Zhao, Grzegorz Pyka
Publicado en: Innovation News Network, Edición Edición 4, 2020
Editor: The Innovation Platform