Skip to main content

A.dditive MA.nufacturing for T.iltrotor HO.using

Deliverables

T5.D1 Dissemination Plan & Register

In progress (Y) list of dissemination targets, topics, events and proposals relevant to AMATHO’s results. It will be approved by the Consortium Steering Committee.

Searching for OpenAIRE data...

Publications

Process defects and in situ monitoring methods in metal powder bed fusion: A review

Author(s): Grasso, Marco; Colosimo, Bianca Maria
Published in: Measurement Science and Technology, 2, 2017
Publisher: IOP

Penelope : A Novel Prototype for In Situ Defect Removal in LPBF

Author(s): Bianca Maria Colosimo; E. Grossi; F. Caltanissetta; Marco Grasso
Published in: JOM, 2, 2020
Publisher: Springer
DOI: 10.1007/s11837-019-03964-0

Vision-based control for track geometry optimization of complex AM motion profiles by on-line laser power modulation

Author(s): Baraldo, S., Vandone, A., Valente, A., and Carpanzano, E
Published in: Procedia CIRP, 2020
Publisher: Elsevier

Closed-loop control by laser power modulation in Direct Energy Deposition Additive Manufacturing

Author(s): Baraldo, S., Vandone, A., Valente, A., and Carpanzano, E.
Published in: 5th International Conference on the Industry 4.0 Model for Additive Manufacturing (AMP 2020 – Belgrade)., 2020, Page(s) 1-15
Publisher: AMP 2020

In-situ Monitoring of Metal Additive Manufacturing Processes via Spatter Signature

Author(s): Grasso, MARCO LUIGI; Repossini, Giulia; Colosimo, BIANCA MARIA
Published in: Proceedings of the XIII AITeM Conference, 2017, Page(s) 1-10
Publisher: Associazione Italiana di Tecnologia Meccanica

Fracture and fatigue behaviour of AlSi7Mg0.6 produced by Selective Laser Melting: effects of thermal-treatments

Author(s): Grande, A. M.; Cacace, S.; Demir, A. G.; Sala, G.
Published in: 1, 2019
Publisher: AIDAA

Monitoring in LMD_Polimi

Author(s): Previtali, Barbara; Furlan; Maffia; Turkai
Published in: 2, 2021
Publisher: Politecnico di Milano
DOI: 10.5281/zenodo.5068257

Process monitoring and outcome inspection

Author(s): Valente, Anna; Marchetti, Andrea; Vandone, Ambra; Mazzucato, Federico; Baraldo, Stefano
Published in: 1, 2021
Publisher: Politecnico di Milano
DOI: 10.5281/zenodo.5084705

Process defects and in situ monitoring methods in metal powder bed fusion: a review

Author(s): Marco Grasso, Bianca Maria Colosimo
Published in: Measurement Science and Technology, 28/4, 2017, Page(s) 044005, ISSN 0957-0233
Publisher: Institute of Physics and the Physical Society
DOI: 10.1088/1361-6501/aa5c4f

Limitations of the inherent strain method in simulating powder bed fusion processes

Author(s): Matteo Bugatti, Quirico Semeraro
Published in: Additive Manufacturing, 23, 2018, Page(s) 329-346, ISSN 2214-8604
Publisher: Elsevier BV
DOI: 10.1016/j.addma.2018.05.041

Opportunities and challenges of quality engineering for additive manufacturing

Author(s): Bianca M. Colosimo, Qiang Huang, Tirthankar Dasgupta, Fugee Tsung
Published in: Journal of Quality Technology, 50/3, 2018, Page(s) 233-252, ISSN 0022-4065
Publisher: American Society of Quality
DOI: 10.1080/00224065.2018.1487726#aHR0cHM6Ly90YW5kZm9ubGluZS5jb20vZG9pL3BkZi8xMC4xMDgwLzAwMjI0MDY1LjIwMT

About Fluence and Process Parameters on Maraging Steel Processed by Selective Laser Melting: Do They Convey the Same Information?

Author(s): Stefania Cacace, Quirico Semeraro
Published in: International Journal of Precision Engineering and Manufacturing, 19/12, 2018, Page(s) 1873-1884, ISSN 2234-7593
Publisher: INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
DOI: 10.1007/s12541-018-0204-y

Spatially weighted PCA for monitoring video image data with application to additive manufacturing

Author(s): Bianca M. Colosimo, Marco Grasso
Published in: Journal of Quality Technology, 50/4, 2018, Page(s) 391-417, ISSN 0022-4065
Publisher: American Society of Quality
DOI: 10.1080/00224065.2018.1507563

Vision-based melt pool monitoring system setup for additive manufacturing

Author(s): Ambra Vandone, Stefano Baraldo, Anna Valente, Federico Mazzucato
Published in: Procedia CIRP, 81, 2019, Page(s) 747-752, ISSN 2212-8271
Publisher: Elsevier
DOI: 10.1016/j.procir.2019.03.188

In Situ Monitoring of Powder Bed Fusion Homogeneity in Electron Beam Melting

Author(s): Marco Grasso
Published in: MATERIALS, 1, 2021
Publisher: MDPI
DOI: 10.5281/zenodo.5713975