A.dditive MA.nufacturing for T.iltrotor HO.using

An investigation on the effect of different multi-step heat treatments on the microstructure, texture and mechanical properties of the DED-produced Ti-6Al-4V alloy

Autores: A. Carrozza, A. Aversa, F. Mazzucato, E. Bassini, D. Manfredi, S. Biamino, A. Valente, P. Fino
Publicado en: Materials Characterization, Edición 10445803, 2022, ISSN 1044-5803
Editor: Elsevier BV
DOI: 10.1016/j.matchar.2022.111958

Multi-physics based methodology for evaluating powder feeding quality for Laser Metal Deposition

Autores: S. Baraldo, A. Roncoroni, F. Palo, A. Valente
Publicado en: Procedia CIRP, Edición 22128271, 2022, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2022.05.036

Process defects and in situ monitoring methods in metal powder bed fusion: a review

Autores: Marco Grasso, Bianca Maria Colosimo
Publicado en: Measurement Science and Technology, Edición 28/4, 2017, Página(s) 044005, ISSN 0957-0233
Editor: Institute of Physics and the Physical Society
DOI: 10.1088/1361-6501/aa5c4f

Limitations of the inherent strain method in simulating powder bed fusion processes

Autores: Matteo Bugatti, Quirico Semeraro
Publicado en: Additive Manufacturing, Edición 23, 2018, Página(s) 329-346, ISSN 2214-8604
Editor: Elsevier BV
DOI: 10.1016/j.addma.2018.05.041

Opportunities and challenges of quality engineering for additive manufacturing

Autores: Bianca M. Colosimo, Qiang Huang, Tirthankar Dasgupta, Fugee Tsung
Publicado en: Journal of Quality Technology, Edición 50/3, 2018, Página(s) 233-252, ISSN 0022-4065
Editor: American Society of Quality
DOI: 10.1080/00224065.2018.1487726#aHR0cHM6Ly90YW5kZm9ubGluZS5jb20vZG9pL3BkZi8xMC4xMDgwLzAwMjI0MDY1LjIwMT

About Fluence and Process Parameters on Maraging Steel Processed by Selective Laser Melting: Do They Convey the Same Information?

Autores: Stefania Cacace, Quirico Semeraro
Publicado en: International Journal of Precision Engineering and Manufacturing, Edición 19/12, 2018, Página(s) 1873-1884, ISSN 2234-7593
Editor: INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
DOI: 10.1007/s12541-018-0204-y

Spatially weighted PCA for monitoring video image data with application to additive manufacturing

Autores: Bianca M. Colosimo, Marco Grasso
Publicado en: Journal of Quality Technology, Edición 50/4, 2018, Página(s) 391-417, ISSN 0022-4065
Editor: American Society of Quality
DOI: 10.1080/00224065.2018.1507563

Vision-based melt pool monitoring system setup for additive manufacturing

Autores: Ambra Vandone, Stefano Baraldo, Anna Valente, Federico Mazzucato
Publicado en: Procedia CIRP, Edición 81, 2019, Página(s) 747-752, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2019.03.188

Laser Ablation Adaptive Slicing for Shape Deviation Control of Additively Manufactured Parts

Autores: O. Avram, M. Menerini, A. Orlandini, A. Valente, E. Carpanzano
Publicado en: Procedia CIRP, Edición 22128271, 2021, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2021.11.051

Transfer learning of neural network based process models in Direct Metal Deposition

Autores: D. Knüttel, S. Baraldo, A. Valente, K. Wegener, E. Carpanzano
Publicado en: Procedia CIRP, Edición 22128271, 2022, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2022.05.076

Estimation of the accuracy of measurement of internal defects in X-ray Computed Tomography

Autores: Stefania Cacace; Simone Giacomazzi; Quirico Semeraro
Publicado en: Procedia CIRP, 2021
Editor: ELSEVIER
DOI: 10.1016/j.procir.2021.03.042

In-situ Monitoring of Metal Additive Manufacturing Processes via Spatter Signature

Autores: Marco Luigi Giuseppe Grasso; Repossini, Giulia; Bianca Maria Colosimo
Publicado en: Politecnico di Milano - IRIS, 2017
Editor: Proceedings of the XIII AITeM Conference

Process defects and in situ monitoring methods in metal powder bed fusion: A review

Autores: Grasso, Marco; Colosimo, Bianca Maria
Publicado en: Measurement Science and Technology, Edición 2, 2017
Editor: IOP

Penelope : A Novel Prototype for In Situ Defect Removal in LPBF

Autores: Bianca Maria Colosimo; E. Grossi; F. Caltanissetta; Marco Grasso
Publicado en: JOM, Edición 2, 2020
Editor: Springer
DOI: 10.1007/s11837-019-03964-0

Vision-based control for track geometry optimization of complex AM motion profiles by on-line laser power modulation

Autores: Baraldo, S., Vandone, A., Valente, A., and Carpanzano, E
Publicado en: Procedia CIRP, 2020
Editor: Elsevier

Closed-loop control by laser power modulation in Direct Energy Deposition Additive Manufacturing

Autores: Baraldo, S., Vandone, A., Valente, A., and Carpanzano, E.
Publicado en: 5th International Conference on the Industry 4.0 Model for Additive Manufacturing (AMP 2020 – Belgrade)., 2020, Página(s) 1-15
Editor: AMP 2020

In-situ Monitoring of Metal Additive Manufacturing Processes via Spatter Signature

Autores: Grasso, MARCO LUIGI; Repossini, Giulia; Colosimo, BIANCA MARIA
Publicado en: Proceedings of the XIII AITeM Conference, 2017, Página(s) 1-10
Editor: Associazione Italiana di Tecnologia Meccanica

Fracture and fatigue behaviour of AlSi7Mg0.6 produced by Selective Laser Melting: effects of thermal-treatments

Autores: Grande, A. M.; Cacace, S.; Demir, A. G.; Sala, G.
Publicado en: Edición 1, 2019
Editor: AIDAA

Influence of production batch related parameters on static and fatigue resistance of LPBF produced AlSi7Mg0.6

Autores: Stefania Cacace; Ali Gökhan Demir; Giuseppe Sala; Antonio Mattia Grande
Publicado en: International Journal of Fatigue, 2022
Editor: ELSEVIER
DOI: 10.1016/j.ijfatigue.2022.107227

Monitoring in LMD_Polimi

Autores: Previtali, Barbara; Furlan; Maffia; Turkai
Publicado en: Edición 2, 2021
Editor: Politecnico di Milano
DOI: 10.5281/zenodo.5068257

Process monitoring and outcome inspection

Autores: Valente, Anna; Marchetti, Andrea; Vandone, Ambra; Mazzucato, Federico; Baraldo, Stefano
Publicado en: Edición 1, 2021
Editor: Politecnico di Milano
DOI: 10.5281/zenodo.5084705

POSTER AT 12TH EASN

Autores: Chiozzini, Sala
Publicado en: 2022
Editor: zenodo
DOI: 10.5281/zenodo.7308981

AMATHO

Autores: Chiozzini, Corrado; Sala, Giuseppe
Publicado en: 2022
Editor: CS2-JU
DOI: 10.5281/zenodo.7308980

Influence of Defect on Mechanical Performance of Ti-6Al-4V Alloy Manufactured by EBM

Autores: E. S. Constantine
Publicado en: Student Master Thesis, 2019
Editor: Politecnico di Milano

Thermo-Mechanical Modeling of Metal Parts Produced by Additive Manufacturing

Autores: A. Colusso
Publicado en: Student Master Thesis, 2022
Editor: SUPSI

Selective Laser Melting of A357 Aluminum Alloy: Fatigue Strength Assessment

Autores: R. Lucca
Publicado en: Student Master Thesis, 2019
Editor: Politecnico di Milano

Comprehensive Design Methodology for Metal Aeronautical Components Produced by Additive Manufacturing

Autores: R. Ferreira
Publicado en: Student Master Thesis, 2022
Editor: Politecnico di Milano

Static and Fracture Analyses of an Additively Manufactured Aeronautical Part

Autores: G. Baffioni
Publicado en: Student Master Thesis, 2019
Editor: Politecnico di Milano

Environmental impact analysis of additive manufacturing on aerospace metal components

Autores: S. Razza
Publicado en: Student Master Thesis, 2020
Editor: Politecnico di Milano

Mechanical performances of a selective laser melted Ti6Al4V aerospace component

Autores: E. Chemello
Publicado en: Student Master Thesis, 2020
Editor: Politecnico di Milano

Thermal treatments effects on fracture toughness of Ti6Al4V alloy produced by SLM and EBM

Autores: A. Giovanni
Publicado en: Student Master Thesis, 2019
Editor: Politecnico di Milano

Redesign of a tiltrotor gearbox housing for Additive Manufacturing

Autores: A. Bologna
Publicado en: Student Master Thesis, 2022
Editor: Politecnico di Milano

Ultrafast Laser Ablation: modelling and experimental validation

Autores: A. K. Orlandini
Publicado en: Student Master Thesis, 2022
Editor: SUPSI

Topology optimization of a helicopter servo bracket for AM production

Autores: G. R. Garbujo
Publicado en: Student Master Thesis, 2020
Editor: Politecnico di Milano

Effects of thermal treatments on the microstructure of Ti6Al4V alloy manufactured by EBM

Autores: C. Punzo
Publicado en: Student Master Thesis, 2019
Editor: Politecnico di Milano

In Situ Monitoring of Powder Bed Fusion Homogeneity in Electron Beam Melting

Autores: Marco Grasso
Publicado en: MATERIALS, Edición 1, 2021
Editor: MDPI
DOI: 10.5281/zenodo.5713975

Resultado final

Publicaciones

Compartir esta página

Descargar