Lignin Based Carbon Fibres for Composites

Resultado final

Project outputs published in project repository/ website - Open Access

Demonstration to industry (event and report)

Demonstration to industry (event and report).

Regular management activities performed by organisational bodies

Regular management activities performed by organisational bodies. This is a continuous activity over the duration of the project.

Closing Dissemination Seminar

Closing Dissemination Seminar.

Regular management activities performed by organisational bodies (M36)

Regular management activities performed by organisational bodies. This is a continuous activity over the duration of the project.

Archiving Plan

Archiving Plan.

Publications in scientific and technical journals

Publications in scientific and technical journals to be delivered in M12 and M48.

Recommendations for optimal routes to sustainable exploitation of LIBRE materials and processes from completed economic analysis of LIBRE outputs

Recommendations for optimal routes to sustainable exploitation of LIBRE materials and processes from completed economic analysis of LIBRE outputs.

Exploitation plan updated M32

Exploitation plan, to be updated over the lifetime of the project

Standards (Updated Annually)

Standards (Updated Annually). Delivery dates M12, M24, M36, M48.

Life Cycle Analysis results and interpretations from LIBRE process – carbon fiber

Recommendations for future work required and appropriate commercialisation of LIBRE technology from completed economic analysis of LIBRE outputs.

Exploitation plan tailored to the needs of individual partners (updated annually)

Exploitation plan tailored to the needs of individual partners (updated annually). Deadlines in M3, M15, M28, M40.

Recommendations for future work required and appropriate commercialisation of LIBRE technology from completed economic analysis of LIBRE outputs.

Recommendations for future work required and appropriate commercialisation of LIBRE technology from completed economic analysis of LIBRE outputs

Life Cycle Analysis results and interpretation from LIBRE process – composite products

Project Outcomes published in Peer-reviewed Journals
Recommendations for optimal routes to sustainable exploitation of LIBRE materials and processes from completed Life Cycle Analysis

Recommendations for optimal routes to sustainable exploitation of LIBRE materials and processes from completed Life Cycle Analysis.

Business Planning and Technical Exploitation group ratified

Business Planning and Technical Exploitation group ratified.

Standards (Updated M36)

Standards (Updated Annually). Delivery dates M12, M24, M36, M48.

IP assessment with partners and Dissemination Plan

IP assessment with partners and Dissemination Plan.

Publicaciones

From Bio-Waste to Bio-Based. AD-Plasma Modifikation biobasierter Kohlenstoff-Fasern: Vortrag gehalten beim 37. ak-adp Workshop, 11.-12. November 2020, Leipzig

Autores: Ihde, Jörg
Publicado en: Fraunhofer IFAM, Edición 1, 2020, ISSN 1439-6009
Editor: Fraunhofer-Publica

Allocation in life cycle assessment of lignin

Autores: Magdalena Svanström; Frida Hermansson; Mathias Janssen
Publicado en: International Journal of Life Cycle Assessment (0948-3349) vol.in press(2020), Edición 1, 2020, ISSN 0948-3349
Editor: Springer Verlag
DOI: 10.1007/s11367-020-01770-4

Facile Tailoring of Structures for Controlled Release of Paracetamol from Sustainable Lignin Derived Platforms

Autores: Mario Culebras, Mahboubeh Pishnamazi, Gavin M. Walker, Maurice N. Collins
Publicado en: Molecules, Edición 26/6, 2021, Página(s) 1593, ISSN 1420-3049
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/molecules26061593

Lignin Doped Carbon Nanotube Yarns for Improved Thermoelectric Efficiency

Autores: Mario Culebras, Guang Ren, Steward O'Connell, Juan J. Vilatela, Maurice N. Collins
Publicado en: Advanced Sustainable Systems, Edición 4/11, 2020, Página(s) 2000147, ISSN 2366-7486
Editor: Wiley-VCH GmbH
DOI: 10.1002/adsu.202000147

Effect of Atmospheric Pressure Plasma Treatment of Glass Fibers on the Composite Strength of Endless Fiber-Reinforced Injection Molded Components

Autores: Tobias Gebken, Rüdiger Sachs, Markus Kühn, Jörg Ihde, Klaus Dröder, Ralph Wilken
Publicado en: Key Engineering Materials, Edición 801, 2019, Página(s) 251-257, ISSN 1662-9795
Editor: Trans Tech Publications Ltd
DOI: 10.4028/www.scientific.net/kem.801.251

Treatment of Flax Fabric with AP-DBD in Parallel Plane Configuration

Autores: Rüdiger Sachs, Jörg Ihde, Ralph Wilken, Bernd Mayer
Publicado en: Plasma, Edición 2/2, 2019, Página(s) 272-282, ISSN 2571-6182
Editor: MDPI
DOI: 10.3390/plasma2020019

Biobased Structurally Compatible Polymer Blends Based on Lignin and Thermoplastic Elastomer Polyurethane as Carbon Fiber Precursors

Autores: Mario Culebras, Anne Beaucamp, Yan Wang, Manuel M. Clauss, Erik Frank, Maurice N. Collins
Publicado en: ACS Sustainable Chemistry & Engineering, 2018, ISSN 2168-0485
Editor: American Chemical Society
DOI: 10.1021/acssuschemeng.8b01170

Thermoelectric properties of electrospun carbon nanofibres derived from lignin

Autores: Niall Dalton, Robert P. Lynch, Maurice N. Collins, Mario Culebras
Publicado en: International Journal of Biological Macromolecules, Edición 121, 2019, Página(s) 472-479, ISSN 0141-8130
Editor: Elsevier BV
DOI: 10.1016/j.ijbiomac.2018.10.051

Understanding the thermal and dielectric response of organosolv and modified kraft lignin as a carbon fibre precursor

Autores: Mario Culebras, Maria J. Sanchis, Anne Beaucamp, Marta Carsí, Baljinder K. Kandola, A. Richard Horrocks, Gianmarco Panzetti, Colin Birkinshaw, Maurice N. Collins
Publicado en: Green Chemistry, Edición 20/19, 2018, Página(s) 4461-4472, ISSN 1463-9262
Editor: Royal Society of Chemistry
DOI: 10.1039/c8gc01577e

Prospective study of lignin-based and recycled carbon fibers in composites through meta-analysis of life cycle assessments

Autores: Frida Hermansson, Matty Janssen, Magdalena Svanström
Publicado en: Journal of Cleaner Production, Edición 223, 2019, Página(s) 946-956, ISSN 0959-6526
Editor: Elsevier BV
DOI: 10.1016/j.jclepro.2019.03.022

Valorization of lignin in polymer and composite systems for advanced engineering applications – A review

Autores: Maurice N. Collins, Mărioara Nechifor, Fulga Tanasă, Mădălina Zănoagă, Anne McLoughlin, Michał A. Stróżyk, Mario Culebras, Carmen-Alice Teacă
Publicado en: International Journal of Biological Macromolecules, Edición 131, 2019, Página(s) 828-849, ISSN 0141-8130
Editor: Elsevier BV
DOI: 10.1016/j.ijbiomac.2019.03.069

Bio‐derived carbon nanofibers from lignin as high performance Li‐ion anode materials

Autores: Mario Culebras, Hugh Geaney, Anne Beaucamp, Prathviraj Upadhyaya, Eric Dalton, Kevin M Ryan[, Maurice N Collins
Publicado en: ChemSusChem, 2019, ISSN 1864-5631
Editor: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/cssc.201901562

Carbon fibres from renewable resources: the role of the lignin molecular structure in its blendability with biobased poly(ethylene terephthalate)

Autores: Anne Beaucamp, Yan Wang, Mario Culebras, Maurice N. Collins
Publicado en: Green Chemistry, 2019, ISSN 1463-9262
Editor: Royal Society of Chemistry
DOI: 10.1039/c9gc02041a

Biopolymer blends from hardwood lignin and bio-polyamides: Compatibility and miscibility

Autores: R. Muthuraj, M. Hajee, A.R. Horrocks, B.K. Kandola
Publicado en: International Journal of Biological Macromolecules, Edición 132, 2019, Página(s) 439-450, ISSN 0141-8130
Editor: Elsevier BV
DOI: 10.1016/j.ijbiomac.2019.03.142

Exploring the role of lignin structure in molecular dynamics of lignin/bio-derived thermoplastic elastomer polyurethane blends

Autores: P. Ortiz-Serna, M. Carsí, M. Culebras, M.N. Collins, M.J. Sanchis
Publicado en: International Journal of Biological Macromolecules, Edición 158, 2020, Página(s) 1369-1379, ISSN 0141-8130
Editor: Elsevier BV
DOI: 10.1016/j.ijbiomac.2020.04.261

Wood-Derived Hydrogels as a Platform for Drug-Release Systems

Autores: Mario Culebras, Anthony Barrett, Mahboubeh Pishnamazi, Gavin Michael Walker, Maurice N. Collins
Publicado en: ACS Sustainable Chemistry & Engineering, Edición 9/6, 2021, Página(s) 2515-2522, ISSN 2168-0485
Editor: American Chemical Society
DOI: 10.1021/acssuschemeng.0c08022

Pre-treatment technologies of enhanced usage of fiber re-enforced polymers and future perspectives

Autores: Regula, Christoph; Ihde, Jörg; Tornow, Christian; Wübben, Thomas; Wilken, Ralph; Mayer, Bernd
Publicado en: Fraunhofer IFAM, Edición 1, 2020, Página(s) 179-183
Editor: Fraunhofer-Publica

Resultado final

Publicaciones

Compartir esta página

Descargar