Properties of near-net-shape cast hot and cold rolled, deep-drawable and cold-deformable steels

Project Information

Grant agreement ID: 7210-EC-108

Project closed

Start date 1 November 1993

End date 30 April 1997

Funded under

• Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Total cost € 1 316 500,00

EU contribution € 789 900,00

Coordinated by

MAX-PLANCK-INSTITUT FÜR EISENFORSCHUNG
Germany

Objective

This project is aimed at determining the achievable final properties when producing thin strip of differing thicknesses (3 mm, 5-20 mm and 10 mm). Investigations will also be carried out into ways in which the structure can be influenced by the control of solidification processes and by hot and cold rolling with final heat treatment. Examination will be made of means by which desired final properties may be obtained under conditions of near-net-shape casting for various steels.

Programme(s)

• ECSC-STEELRES 8C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Topic(s)

• D3 - Physical metallurgy of rolling and finishing

Call for proposal

Data not available

Funding Scheme

CSC - Cost-sharing contracts

Coordinator

MAX-PLANCK-INSTITUT FÜR EISENFORSCHUNG

• EU contribution: No data
• Address: Max-Planck-Strasse 1 ; 40237 DÜSSELDORF ; Germany
• Total cost: No data