Development of high strength hot- and cold-rolled steel strip with extended production applications

Project Information

Grant agreement ID: 7210-EC-404

Project closed

Start date 1 July 1994

End date 30 June 1998

Funded under

• Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Total cost € 338 500,00

EU contribution € 203 100,00

Coordinated by

CENTRO SVILUPPO MATERIALI SPA
Italy

Objective

The aim of this project is to develop concepts allowing the increased requirements for steel strip products to be achieved using the smallest possible number of steel grades. The problem could be solved through variations of the heat treatment and cooling parameters during hot rolling and annealing. Laboratory experiments in combination with modelling procedures hold out the promise of effectively meeting the aims of this project. Focusing on a reduced number of steel grades would provide effective logistic and economic advantages.

Programme(s)

• ECSC-STEELRES 8C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Topic(s)

• D3 - Physical metallurgy of rolling and finishing

Call for proposal

Data not available

Funding Scheme

Data not available

Coordinator

CENTRO SVILUPPO MATERIALI SPA

• EU contribution: No data
• Address: Via Di Castel Romano 100 ; ROMA ; Italy
• Total cost: No data