Objetivo This project aims to develop a new generation of high carbon (0.8 - 0.85%) steels for high strength wire-rods of large diameter (13 mm) suitable for producing cold drawn wires of 4 - 11 mm diameter, tensile strength 1560 - 2100 MPa and good ductility. In close association with this objective, work will be carried out on adapting this range of products to mechanical descaling. This aim will be achieved by optimising the thermomechanical treatment parameters and the steel composition. Extensive industrial and laboratory trials will be carried out. Programa(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Tema(s) D1 - Rolling - long products and reheating furnaces Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador CENTRO SVILUPPO MATERIALI SPA Aportación de la UE Sin datos Dirección Via di Castel Romano 100/102 00128 ROMA EUR Italia Ver en el mapa Coste total Sin datos Participantes (3) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo CENTRO DE ESTUDIOS E INVESTIGACIONES TECNICAS DE GUIPUZKOA España Aportación de la UE Sin datos Dirección M. de Manuel Lardizábal, 15 Barrio de Ibaeta 20018 SAN SEBASTIAN Ver en el mapa Coste total Sin datos ISPAT HAMBURGER STAHLWERKE Alemania Aportación de la UE Sin datos Dirección Dradenaustrasse 33 21129 HAMBURG 95 Ver en el mapa Coste total Sin datos VOEST-ALPINE AUSTRIA DRAHT Austria Aportación de la UE Sin datos Dirección Bahnhofstrasse 2 8600 BRUCK A.D. MUR Ver en el mapa Coste total Sin datos