Objetivo The objective of the project is to develop a technique for assessing the scrap density charged in the EAF. Parameters will be put in relationship with the scrap behaviour in the furnace in order to optimise the charging practice. The work will be performed at the scrap yard directly at the basket-charging stand in the steel-shop. To estimate the scrap density it is necessary to measure the evolution of the scrap volume inside the basket during the charging operation. For this purpose a level measurement technique based on an optical sensor will be developed. A digital camera and computer-based system will record images of every charged layer of the scrap in order to collect continuous information about scrap composition and size distribution. Programa(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Tema(s) C1 - Primary steelmaking Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador CENTRE DE RECHERCHES METALLURGIQUES Aportación de la UE Sin datos Dirección Rue Ernest Solvay, 11 4000 LIEGE Bélgica Ver en el mapa Coste total Sin datos Participantes (3) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo FERRIERE NORD S.P.A. Italia Aportación de la UE Sin datos Dirección Zona Industriale Rivoli di Osoppo 33100 UDINE Ver en el mapa Coste total Sin datos INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE Francia Aportación de la UE Sin datos Dirección Immeuble "PACIFIC", La Défense 7 11/13 Cours Valmy 92800 PUTEAUX Ver en el mapa Coste total Sin datos PROFILARBED-RECHERCHES Luxemburgo Aportación de la UE Sin datos Dirección 66, rue de Luxembourg 4221 ESCH-SUR-ALZETTE Ver en el mapa Coste total Sin datos