Objetivo The project aims at defining guidelines for the production of thin gauge hot rolled strips in an economically accepted way. Laboratory trials will be carried out to simulate the transfer of hot rolled materials for an additional rolling stand where a heavy warm rolling reduction will be performed. The feasibility and possibilities of this novel approach will be investigated. Research work will be concentrated on ferritic rolling of ELC-, ULC- and IF-steels, warm rolling of plain CMn steels and pearlitic rolling of eutectoidic and proeutecctoidic steels. The influence of the processing parameters on the mechanical properties and the surface quality will be investigated. Guidelines will be defined for the design of the equipment and the obtained results will be evaluated regarding the properties and the estimated cost. Programa(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Tema(s) D3 - Physical metallurgy of rolling and finishing Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador CENTRE DE RECHERCHES METALLURGIQUES Aportación de la UE Sin datos Dirección Rue Ernest Solvay, 11 4000 LIEGE Bélgica Ver en el mapa Coste total Sin datos Participantes (2) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo MAX-PLANCK-INSTITUT FÜR EISENFORSCHUNG Alemania Aportación de la UE Sin datos Dirección Max-Planck-Strasse 1 40237 DÜSSELDORF Ver en el mapa Coste total Sin datos VOEST-ALPINE INDUSTRIEANLAGENBAU Austria Aportación de la UE Sin datos Dirección Turmstrasse 44 Box 4 4031 LINZ Ver en el mapa Coste total Sin datos