Objectif The project aims at defining guidelines for the production of thin gauge hot rolled strips in an economically accepted way. Laboratory trials will be carried out to simulate the transfer of hot rolled materials for an additional rolling stand where a heavy warm rolling reduction will be performed. The feasibility and possibilities of this novel approach will be investigated. Research work will be concentrated on ferritic rolling of ELC-, ULC- and IF-steels, warm rolling of plain CMn steels and pearlitic rolling of eutectoidic and proeutecctoidic steels. The influence of the processing parameters on the mechanical properties and the surface quality will be investigated. Guidelines will be defined for the design of the equipment and the obtained results will be evaluated regarding the properties and the estimated cost. Programme(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Thème(s) D3 - Physical metallurgy of rolling and finishing Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur CENTRE DE RECHERCHES METALLURGIQUES Contribution de l’UE Aucune donnée Adresse Rue Ernest Solvay, 11 4000 LIEGE Belgique Voir sur la carte Coût total Aucune donnée Participants (2) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire MAX-PLANCK-INSTITUT FÜR EISENFORSCHUNG Allemagne Contribution de l’UE Aucune donnée Adresse Max-Planck-Strasse 1 40237 DÜSSELDORF Voir sur la carte Coût total Aucune donnée VOEST-ALPINE INDUSTRIEANLAGENBAU Autriche Contribution de l’UE Aucune donnée Adresse Turmstrasse 44 Box 4 4031 LINZ Voir sur la carte Coût total Aucune donnée