Development of a cost effective low Ni austenitic steel with superior high temperature properties up to 950°C (CELNIS)

Project Information

Grant agreement ID: 7210-PR-308

Project closed

Start date 1 July 2001

End date 31 December 2004

Funded under

• Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002

Total cost € 1 040 500,00

EU contribution € 624 300,00

Coordinated by

TNO INSTITUTE OF INDUSTRIAL TECHNOLOGY
Netherlands

Objective

The objective of the project is to develop a material with a reduced Ni content (< 20 versus 32%), a 50% higher creep rupture strength and a comparable oxidation resistance than the Alloy 800H. Besides, postweld heat treatments should not be necessary. For the development the European material 1.4910 will be used as benchmark criterion.

Programme(s)

• ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002

Topic(s)

• F3 - Special and alloy steels

Call for proposal

Data not available

Funding Scheme

CSC - Cost-sharing contracts

Coordinator

TNO INSTITUTE OF INDUSTRIAL TECHNOLOGY

• EU contribution: No data
• Address: Schoemakerstraat, 97 ; 2628 VK DELFT ; Netherlands
• Total cost: No data

Participants (3)

AIR LIQUIDE

France

• EU contribution: No data
• Address: 75, Quai d'Orsay ; 75321 PARIS CEDEX 07
• Total cost: No data

CENTRO SVILUPPO MATERIALI SPA

Italy

• EU contribution: No data
• Address: Via di Castel Romano 100/102 ; 00128 ROMA EUR
• Total cost: No data

USINOR INDUSTEEL - CRMC

France

• EU contribution: No data
• Address: USINE DU CREUSOT 56, rue Clémenceau ; 71202 LE CREUSOT
• Total cost: No data