Objectif The aim of this project is to define low C steels and process conditions to manufacture continuous "COIL COATED" coils free from coil breaks (fluting) and stretcher strains after cold forming. The objective is to be achieved by exploring the possibility of using hot coils rolled in the austenitic and ferritic field with different chemical compositions. The effect of the chemical composition, hot rolling conditions both in the austenitic and in the ferritic phase, total thickness reduction during cold rolling, annealing cycle in the hot-dip zinc coating and continuous annealing lines, the repartition of pre- deformation between skinpass and stretch levelling in the galvanising or continuous annealing line on recrystallised ferrite grain size, yield point elongation and strain ageing index will be investigated. Also the response to pickling and the sensitivity of strip edges to crack appearance will be assessed. Programme(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Thème(s) F4 - Thin sheets Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur LA MAGONA D'ITALIA SPA Contribution de l’UE Aucune donnée Adresse Via Porto Vecchio 34 57025 PIOMBINO Italie Voir sur la carte Coût total Aucune donnée Participants (3) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire CENTRE DE RECHERCHES METALLURGIQUES Belgique Contribution de l’UE Aucune donnée Adresse Rue Ernest Solvay, 11 4000 LIEGE Voir sur la carte Coût total Aucune donnée CENTRO SVILUPPO MATERIALI SPA Italie Contribution de l’UE Aucune donnée Adresse Via di Castel Romano 100/102 00128 ROMA EUR Voir sur la carte Coût total Aucune donnée SOLLAC-FOS France Contribution de l’UE Aucune donnée Adresse 13776 FOS-SUR-MER CEDEX Voir sur la carte Coût total Aucune donnée