Skip to main content

Improving the crashworthiness of composite transportation structures

Deliverables

Project website

Management Group: Dissemination - Project website.

Searching for OpenAIRE data...

Publications

An Improved Load Introduction Technique for Dynamic Material Characterisation at Intermediate Strain Rate

Author(s): Sanghyun Yoo, Dominik Schueler, Marcel Brodbeck, Nathalie Toso, Giuseppe Catalanotti, Heinz Voggenereiter
Published in: Proceedings, Issue 2/8, 2018, Page(s) 381, ISSN 2504-3900
DOI: 10.3390/ICEM18-05203

The effect of processing on the mechanical properties of self-reinforced composites

Author(s): Farzaneh Hassani, Peter J. Martin, Brian G. Falzon
Published in: AIP Conference Proceedings volume 1960, Issue 1960(1), 2018, Page(s) 020010
DOI: 10.1063/1.5034811

Global-local techniques for macroscale analysis and key performance indicator evaluation of composite structures

Author(s): M. Nagaraj, I. Kaleel, M. Petrolo, E. Carrera
Published in: Proceedings of ICMAMS - First International Conference on Mechanics of Advanced Materials, 2018

High strain rate modelling of woven composite using stack shell method

Author(s): C. Srivastava, B. Ravindran, G. Lampeas
Published in: Proceedings of ECCM18 - 18th European Conference on Composite Materials, 2018

Experimental characterisation of satin weave composite laminate at high strain rates using Split Hopkinson Bar Testing

Author(s): B. Ravindran, C. Srivastava, G. Lampeas
Published in: Proceedings of ECCM18 - 18th European Conference on Composite Materials, 2018

Investigation on the effect of cooling rate on the mechanical properties of polypropylene self-reinforced composites

Author(s): F. Hassani, P.J. Martin, B.G. Falzon
Published in: Proceedings of ECCM18 - 18th European Conference on Composite Materials, 2018

Multiscale damage analysis of a plain carbon weave incorporating material variability

Author(s): L.F. Varandas, A.R. Melro, G. Catalanotti, B.G. Falzon
Published in: Proceedings of ECCM18 - 18th European Conference on Composite Materials, 2018

3D weaving and consolidation of carbon fibre T-piece stringers

Author(s): E. Archer, A. McIlhagger, E. Harkin-Jones, G. Neale, C. Ralph, M. Dahale, A. Hardman, C. McGarrigle, G. Stewart
Published in: Proceedings of ECCM18 - 18th European Conference on Composite Materials, 2018

Contact modeling within displacement-based refined one-dimensional beam models

Author(s): I. Kaleel, M.H. Nagaraj, M. Petrolo, E. Carrera
Published in: Proceedings of ICMAMS - First International Conference on Mechanics of Advanced Materials, 2018

Effect of pick density on tensile, compressive and shear properties of 3D woven glass composites

Author(s): M. Dahale, G. Neale, E. Archer, E. Harkin-Jones, A. McIlhagger
Published in: Proceedings of 21st International Conference on Composite Structures (ICCS), 2018

3D Woven Composites for Energy Absorbing Applications

Author(s): G. Neale, M. Dahale, A. McIlhagger, E. Archer, E. Harkin-Jones
Published in: Proceedings of SAMPE Europe - Conference 2018, 2018

HIGH-FIDELITY DAMAGE ANALYSIS OF COMPOSITES USING A PLY-BASED CONTINUUM MODEL

Author(s): Nagaraj, M. H.; Reiner, J.; Vaziri, R.; Carrera, E.; Petrolo, M.
Published in: Proceeding of XXV International Congress of the Italian Association of Aeronautics and Astronautics, Issue 1, 2019

Numerical modelling of unstable mode i transverse intralaminar crack propagation using the size effect law

Author(s): Luís F. Varandas, Denis Dalli, Giuseppe Catalanotti and Brian G. Falzon
Published in: Proceedings of ICCM22 - 22nd International Conference on Composite Materials, 2019

Experimental study on the performance of hybrid metal-composite joints at quasi-static and intermediate rates

Author(s): K Ramaswamy, R M O’Higgins, M C Corbett, C T McCarthy, M A McCarthy,
Published in: Proceedings of ICCM22 - 22nd International Conference on Composite Materials, 2019

Investigation of geometrical and composite material parameters for tension-absorbing bolted joints

Author(s): J. Hassan, R. O’Higgins, T. Feser, C. T. McCarthy, M. Waimer, N. Toso and M. A. McCarthy
Published in: Proceedings of ICCM22 - 22nd International Conference on Composite Materials, 2019

Improvement of Dynamic Testing Procedures for Crashworthiness of Composite Transportation Structures

Author(s): S. Yoo, G. Catalanotti, N. Toso, Y. Toso, H. Voggenreiter (2019)
Published in: Proceedings of Europe-Korea Conference on Science and Technology (EKC),, 2019

Improvement of Testing Methods for Composites at Intermediate Strain Rates

Author(s): S. Yoo, N. Toso, G. Catalanotti, Y. Toso, H. Voggenreiter (2019)
Published in: Proceeding, 2019

Properties and Failure Prediction of Interply Hybrid Composites of Glass and Self-reinforced Polypropylene.

Author(s): F. Hassani, P.J. Martin, M.A. Aravand B.G. Falzon
Published in: Proceedings of ICCM22 - 22nd International Conference on Composite Materials, 2019

Interply hybrid composites of self-reinforced polypropylene with glass fibre reinforced polypropylene under impact loading

Author(s): F. Hassani, P.J. Martin, M.A. Aravand B.G. Falzon
Published in: Proceedings of ECCCS- 1- 1st European Conference On Crashworthiness Of Composite Structures, 2019

Energy absorption mechanisms in layer-to-layer 3d woven composites

Author(s): G. Neale, M. Dahale, S. Yoo, N. Toso, J. Kelly, C. McGarrigle, E. Archer, A. McIlhagger, E. Harkin-Jones
Published in: Proceedings of ICCM22 - 22nd International Conference on Composite Materials, 2019

Comparative studies of structure-property relationship between glass/epoxy and carbon/epoxy 3d woven composites

Author(s): M. Dahale, G.Neale, C. McGarrigle, J. Kelly, E. Archer, E. Harkin-Jones, A.McIlhagger
Published in: Proceedings of SAMPE Europe - Conference 2019, 2019

Influence of textile architecture on the mechanical properties of 3d woven carbon composites

Author(s): M. Dahale, G. Neale, C. McGarrigle, J. Kelly, E. Archer, E. Harkin-Jones, A. McIlhagger
Published in: Proceedings of ICCM22 - 22nd International Conference on Composite Materials, 2019

Effect of strain rate at compressive loading of unidirectional plies in structural composites

Author(s): V. Singh, R. Larsson, E. Marklund, R. Olsson
Published in: Proceedings of 7th ECCOMAS Thematic Conference on Mechanical Response of Composites, Composites 2019, 2019

Optimization of split Hopkinson pressure bar and experimental characterization of 3D woven composite at high strain rate

Author(s): B. Ravindran, G. Lampeas
Published in: Proceedings, of 1st European Conference On Crashworthiness Of Composite Structures - ECCCS-1, 2019

Improvement of mechanical performance in 3D woven by modification of weave parameters

Author(s): M. Dahale, G. Neale, C. McGarrigle, J. Kelly, E. Archer, E. Harkin-Jones, A. McIlhagger
Published in: Proceedings of 1st European Conference On Crashworthiness Of Composite Structures - ECCCS-1, 2019

Dynamic intralaminar fracture toughness of carbon/epoxy composites at intermediate strain rates using size effect.

Author(s): S. Yoo, G. Catalanotti, D. Dalli, N. Toso, Y. Toso, H. Voggenreiter
Published in: Proceedings of 1st European Conference on Crashworthiness of Composite Structures, 2019

In-plane energy absorption in layer-to-layer 3D woven composites: float length variation

Author(s): G. Neale, M. Dahale, S. Yoo, N. Toso, C. McGarrigle, J. Kelly, E. Archer, A. McIlhagger, E. Harkin-Jones
Published in: Proceedings of 1st European Conference On Crashworthiness Of Composite Structures - ECCCS-1, 2019

High-fidelity impact analysis of composite structures using refined structural theories

Author(s): M. Nagaraj, E. Carrera and M. Petrolo
Published in: Proceedings of 1st European Conference On Crashworthiness Of Composite Structures - ECCCS-1, 2019

Numerical modelling of the unstable mode I intralaminar crack propagation in 2D woven composite materials

Author(s): L. Varandas, D. Dalli, G. Catalanotti, B.G. Falzon
Published in: Proceedings of 1st European Conference On Crashworthiness Of Composite Structures - ECCCS-1, 2019

Optimisation of layup and laminate stacking sequence to maximise energy absorption of tension absorbing joints

Author(s): J. Hassan, R. O'Higgins, C. McCarthy, M. McCarthy
Published in: Proceedings of 1st European Conference On Crashworthiness Of Composite Structures - ECCCS-1, 2019

Strain rate dependency of unidirectional composite plies in compressive loading

Author(s): V. Singh, R. Larsson, E. Marklund, R. Olsson
Published in: Proceedings of 1st European Conference On Crashworthiness Of Composite Structures - ECCCS-1, 2019

Influence of extrusion screw designs and speeds on the mechanical properties of melt-blended nylon 6-graphene nanoplatelet nanocomposites

Author(s): S. Attar, B. Chen, G. Catalanotti, B. Falzon
Published in: Proceedings of 1st European Conference On Crashworthiness Of Composite Structures - ECCCS-1, 2019

Mesoscale and macroscale modelling of the quasi-static crushing behaviour of 2D woven CFRP Formula 1 crash structures

Author(s): D. Dalli, L. Varandas, G. Catalanotti, B.G. Falzon, S. Foster
Published in: Proceedings of 1st European Conference On Crashworthiness Of Composite Structures - ECCCS-1, 2019

An experimental and numerical study of the performance characteristics of novel hybrid metal-composite joints

Author(s): K. Ramaswamy, R. O'Higgins, C. McCarthy, M. McCarthy
Published in: Proceedings of 1st European Conference On Crashworthiness Of Composite Structures - ECCCS-1, 2019

Experimental evaluation of the impact behavior and damage effects in carbon fibre composite flat specimens

Author(s): I. Babaei, R. Garg, D. S. Paolino, G. Belingardi, L. Cascone, G. Galizia, A. Calzolari
Published in: Proceedings of 1st European Conference On Crashworthiness Of Composite Structures - ECCCS-1, 2019

Optimisation of discontinuous composites for crashworthiness

Author(s): S. Francis, C. Cameron
Published in: Proceedings of 1st European Conference On Crashworthiness Of Composite Structures - ECCCS-1, 2019

Simulation studies on the crashworthiness of carbon fibre composite flat specimens

Author(s): Calzolari A, Paolino D, Belingardi G, Galizia G, Babaei I, Cascone L, Garg R, Lupicini R.
Published in: Proceedings of 1st European Conference On Crashworthiness Of Composite Structures - ECCCS-1, 2019

Improved Energy Absorption in 3D Woven Composites by Weave Parameter Manipulation

Author(s): G. Neale, M. Dahale,S. Yoo, N. Toso, J. Kelly,C. McGarrigle, E. Archer, A. McIlhagger, E. Harkin-Jones.
Published in: Proceedia CIR, 2019

Improvement on dynamic material Characterisation of carbon/epoxy composites at intermediate strain rates

Author(s): S. Yoo, G. Catalanotti, N. Toso, Y. Toso, H. Voggenreiter
Published in: Proceedings of ICCM22 - 22nd International Conference on Composite Materials, 2019

Characterisation of bearing energy absorption of thin-ply based discontinuous composite.

Author(s): S. Francis, C. Cameron, L.E. Asp, M. Wysocki
Published in: Proceedings of the 9th International Conference on Composite Testing and Model Identification, 2019

An efficient multiscale virtual testing platform for composite via component-wise models

Author(s): I. Kaleel, M.H. Nagaraj, M. Petrolo, E. Carrera, Am. Waas
Published in: Proceedings of the American society for composites—thirty-third technical conference, 2018

A Global-Local Strategy for the Elastoplastic Analysis of Complex Metallic Structures via Component-Wise Approach

Author(s): E. Carrera, I. Kaleel, M. Nagaraj, M. Petrolo
Published in: American Society of Mechanical Engineers Digital Collection, 2018

Contact modelling of composite structures using advanced structural theories

Author(s): M. Nagaraj, I. Kaleel, E. Carrera, M. Petrolo
Published in: Proceedings of XXV International Congress of the Italian Association of Aeronautics and Astronautics, 2019

Accurate evaluation of failure indices of composite layered structures via various FE models

Author(s): A.G. de Miguel, I. Kaleel, M.H. Nagaraj, A. Pagani, M. Petrolo, E. Carrera
Published in: Composites Science and Technology, Issue 167, 2018, Page(s) 174-189, ISSN 0266-3538
DOI: 10.1016/j.compscitech.2018.07.031

On the importance of nesting considerations for accurate computational damage modelling in 2D woven composite materials

Author(s): Luís F. Varandas, Giuseppe Catalanotti, António R. Melro, Brian G. Falzon
Published in: Computational Materials Science, Issue 172, 2020, Page(s) 109323, ISSN 0927-0256
DOI: 10.1016/j.commatsci.2019.109323

Micromechanical analysis of interlaminar crack propagation between angled plies in mode I tests

Author(s): L.F. Varandas, A. Arteiro, G. Catalanotti, B.G. Falzon
Published in: Composite Structures, Issue 220, 2019, Page(s) 827-841, ISSN 0263-8223
DOI: 10.1016/j.compstruct.2019.04.050

Mode I intralaminar fracture toughness of 2D woven carbon fibre reinforced composites: A comparison of stable and unstable crack propagation techniques

Author(s): D. Dalli, G. Catalanotti, L.F. Varandas, B.G. Falzon, S. Foster
Published in: Engineering Fracture Mechanics, Issue 214, 2019, Page(s) 427-448, ISSN 0013-7944
DOI: 10.1016/j.engfracmech.2019.04.003

Effect of weave parameters on the mechanical properties of 3D woven glass composites

Author(s): Monali Dahale, Geoffrey Neale, Ranieri Lupicini, Lucio Cascone, Cormac McGarrigle, John Kelly, Edward Archer, Eileen Harkin-Jones, Alistair McIlhagger
Published in: Composite Structures, Issue 223, 2019, Page(s) 110947, ISSN 0263-8223
DOI: 10.1016/j.compstruct.2019.110947

Compressive intralaminar fracture toughness and residual strength of 2D woven carbon fibre reinforced composites: New developments on using the size effect method

Author(s): D. Dalli, G. Catalanotti, L.F. Varandas, B.G. Falzon, S. Foster
Published in: Theoretical and Applied Fracture Mechanics, Issue 106, 2020, Page(s) 102487, ISSN 0167-8442
DOI: 10.1016/j.tafmec.2020.102487

Evaluation of grit-blasting as a pre-treatment for carbon-fibre thermoplastic composite to aluminium bonded joints tested at static and dynamic loading rates

Author(s): Karthik Ramaswamy, Ronan M. O'Higgins, Ajay Kumar Kadiyala, Michael A. McCarthy, Conor T. McCarthy
Published in: Composites Part B: Engineering, Issue 185, 2020, Page(s) 107765, ISSN 1359-8368
DOI: 10.1016/j.compositesb.2020.107765

Energy absorption capability of composite bolted joints undergoing extended bearing failure

Author(s): Jazib Hassan, Thomas Feser, Ronan M. O'Higgins, Matthias Waimer, Conor T. McCarthy, Nathalie Toso, Michael E. Byrne, Michael A. McCarthy
Published in: Composite Structures, Issue 237, 2020, Page(s) 111868, ISSN 0263-8223
DOI: 10.1016/j.compstruct.2020.111868

Contact analysis of laminated structures including transverse shear and stretching

Author(s): M.H. Nagaraj, I. Kaleel, E. Carrera, M. Petrolo
Published in: European Journal of Mechanics - A/Solids, Issue 80, 2020, Page(s) 103899, ISSN 0997-7538
DOI: 10.1016/j.euromechsol.2019.103899

Nonlinear analysis of compact and thin-walled metallic structures including localized plasticity under contact conditions

Author(s): M.H. Nagaraj, I. Kaleel, E. Carrera, M. Petrolo
Published in: Engineering Structures, Issue 203, 2020, Page(s) 109819, ISSN 0141-0296
DOI: 10.1016/j.engstruct.2019.109819

Effects of transient dynamic loading on the energy absorption capability of composite bolted joints undergoing extended bearing failure

Author(s): Thomas Feser, Jazib Hassan, Matthias Waimer, Ronan M. O'Higgins, Conor T. McCarthy, Nathalie Toso, Heinz Voggenreiter, Michael A. McCarthy
Published in: Composite Structures, 2020, Page(s) 112476, ISSN 0263-8223
DOI: 10.1016/j.compstruct.2020.112476

Mesoscale modelling of extended bearing failure in tension-absorber joints

Author(s): Jazib Hassan , Ronan M. O’Higgins , Conor T. McCarthy , Nathalie Toso , Michael A. McCarthy
Published in: International Journal of Mechanical Sciences, 2020, ISSN 0020-7403
DOI: 10.1016/j.ijmecsci.2020.105777

Quasi-static and dynamic performance of novel interlocked hybrid metal-composite joints

Author(s): Karthik Ramaswamy, Ronan M. O'Higgins, Michael C. Corbett, Michael A. McCarthy, Conor T. McCarthy
Published in: Composite Structures, 2020, Page(s) 112769, ISSN 0263-8223
DOI: 10.1016/j.compstruct.2020.112769