Factory Automation Edge Computing Operating System Reference Implementation

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Report on Dissemination and Communication Activities - M37 release

This deliverable is a report (living document) illustrating the project’s dissemination and communication activities. It reflects the outcomes of task T8.1. This is the fourth of four incremental releases.

FAR-EDGE Architecture and Components Specifications

Specification of the project’s edge computing architecture for factory automation, along with the components that comprise the architecture.

FAR-EDGE Evaluation Activities - M28 release

A report on all the evaluation activities of the project, including testbed scenarios evaluation, evaluation of the project’s use cases, as well as analysis of stakeholders’ feedback. This is the first of two incremental releases.

Report on Ecosystem Members, Activities and Participants - M18 release

This deliverable provides a comprehensive report on the members/participants to the project’s ecosystem, as well as on related activities and services offered to members. It reflects the outcome of tasks T7.1 and T7.4. This is the first of two incremental releases.

CPS Data Model Architecture - M12 release

Report on the CPS data models and ontologies of the project, including techniques for their aggregation into higher level data models. This is the first of two incremental releases.

Analysis of Stakeholders’ Requirements and Factory Automation Vision

Report on stakeholders requirements reflecting the outcomes of task T2.1.

Report on Dissemination and Communication Activities - M6 release

This deliverable is a report (living document) illustrating the project’s dissemination and communication activities. It reflects the outcomes of task T8.1. This is the first of four incremental releases.

Report on Digital Models Support - M24 release

Specification of the digital models that will be integrated and supported by the FAR-EDGE platform, based on the outcomes of task T5.2. This is the second of three incremental releases.

Participation and Contributions to Standards Bodies, Clusters and Associations - M23 release

A report reflecting the outcomes of task T8.5. This is the first of two incremental releases.

Specification of Ecosystem Services

This report outlines the ecosystem structure and services based on the outcomes of task T2.3.

Participation and Contributions to Standards Bodies, Clusters and Associations - M35 release

A report reflecting the outcomes of task T8.5. This is the second of two incremental releases.

Blueprint Solutions and Strategies for Migrating to Decentralized Factory Automation Architectures - M30 release

This deliverable documents strategies for cost-effective migration of conventional automation architectures to hybrid and decentralized ones. The strategies are based on blueprint architectures, which are variants of the project’s core edge computing architecture. The deliverable reflects the results of T3.7. This is the third of three incremental releases.

Exploitation Agreement and Plans - M24 release

This deliverable describes the project’s joint exploitation plan, along with the partners’ individual exploitation plans. It also includes the exploitation agreement of the partners as an appendix. This is the first of two incremental releases.

Blueprint Solutions and Strategies for Migrating to Decentralized Factory Automation Architectures - M10 release

FAR-EDGE Evaluation Activities - M36 release

CPS Data Model Architecture - M24 release

Report on the CPS data models and ontologies of the project, including techniques for their aggregation into higher level data models. This is the second of two incremental releases.

Exploitation Agreement and Plans - M36 release

Report on Testbed Scenarios and Validation - M27 release

A comprehensive report on the testbed validation processes, including an analysis of the technical and operational aspects of all scenarios. This deliverable is the second of a series of three, built on the findings of the previous one.

Public Final Activity Report

A publishable final activity report, covering main aspects of the work, objectives, results and conclusions, including the publishable results of the final plan for using the knowledge and sustaining the project’s results.

Business Cases Analysis - M36 release

A report detailing business plans for the two use cases / deployments of the project at WHR and VTC. This is the second of two incremental releases.

Report on Testbed Scenarios and Validation - M33 release

A comprehensive report on the testbed validation processes, including an analysis of the technical and operational aspects of all scenarios. This deliverable is the third of a series of three, built on the findings of the previous one.

Report on Digital Models Support - M30 release

Specification of the digital models that will be integrated and supported by the FAR-EDGE platform, based on the outcomes of task T5.2. This is the third of three incremental releases.

Report on Digital Models Support - M12 release

Specification of the digital models that will be integrated and supported by the FAR-EDGE platform, based on the outcomes of task T5.2. This is the first of three incremental releases.

Business Cases Analysis - M27 release

A report detailing business plans for the two use cases / deployments of the project at WHR and VTC. This is the first of two incremental releases.

Report on Dissemination and Communication Activities - M24 release

This deliverable is a report (living document) illustrating the project’s dissemination and communication activities. It reflects the outcomes of task T8.1. This is the third of four incremental releases.

Report on Dissemination and Communication Activities - M12 release

This deliverable is a report (living document) illustrating the project’s dissemination and communication activities. It reflects the outcomes of task T8.1. This is the second of four incremental releases.

Report on Testbed Scenarios and Validation - M19 release

A comprehensive report on the testbed validation processes, including an analysis of the technical and operational aspects of all scenarios. This deliverable is the first of a series of three, corresponding to the earliest validation activities of the project’s workplan.

Reference Scenarios, Use Cases and KPIs

Report describing reference scenarios and use cases based on the outcomes of task T2.2.

Report on Ecosystem Members, Activities and Participants - M37 release

Blueprint Solutions and Strategies for Migrating to Decentralized Factory Automation Architectures - M20 release

Baseline Edge Computing Infrastructure for Virtualizing the Automation Pyramid - M24 release

A prototype implementation of the baseline edge computing architecture of the project based on task T3.1. This is the second of two incremental releases.

Distributed Data Analytics Infrastructure - M12 release

Based on the outcomes of task T3.4, this deliverable is the prototype implementation of a data analytics infrastructure over the edge nodes of the edge computing architecture. This is the first of two incremental releases.

Real to Digital Synchronization Functionalities - M15 release

Prototype implementation of the run-time framework implementing the synchronization between real and digital worlds. This is the first of two incremental releases.

Integrated Simulation Services - M27 release

Prototype implementation of the simulation services, along with an accompanying report. This is the second of two incremental releases.

Secure State Sharing and Intelligent Reconfiguration for Edge Computing - M15 release

This deliverable is the prototype implementation with an accompanying report of the secure state sharing (plug-in) mechanisms that is implemented in Task T3.2. These mechanisms are used as a basis for synchronizing the physical and cyber worlds based on the outcomes of tasks T3.4. This is the first of two incremental releases.

Baseline Edge Computing Infrastructure for Virtualizing the Automation Pyramid - M12 release

A prototype implementation of the baseline edge computing architecture of the project based on task T3.1. This is the first of two incremental releases.

FAR-EDGE Integrated Platform - M33 release

The implementation of the integrated FAR-EDGE platform, including an accompanying report. This deliverable is the outcome of task T5.3. This is the third of three incremental releases.

Secure State Sharing and Intelligent Reconfiguration for Edge Computing - M27 release

This deliverable is the prototype implementation with an accompanying report of the secure state sharing (plug-in) mechanisms is be implemented in Task T3.2. These mechanisms are used as a basis for synchronizing the physical and cyber worlds based on the outcomes of tasks T3.4. This is the second of two incremental releases.

Distributed Data Analytics Infrastructure - M24 release

Real to Digital Synchronization Functionalities - M24 release

Prototype implementation of the run-time framework implementing the synchronization between real and digital worlds. This is the second of two incremental releases.

Automation Framework - M27 release

The prototype implementation of the framework for developing automation workflows, with an accompanying report based on task T3.3. This is the second of two incremental releases.

Integrated Simulation Services - M18 release

Prototype implementation of the simulation services, along with an accompanying report. This is the first of two incremental releases.

Automation Framework - M15 release

The prototype implementation of the framework for developing automation workflows, with an accompanying report based on task T3.3. This is the first of two incremental releases.

FAR-EDGE Integrated Platform - M27 release

The implementation of the integrated FAR-EDGE platform, including an accompanying report. This deliverable is the outcome of task T5.3. This is the second of three incremental releases.

FAR-EDGE Integrated Platform - M18 release

The implementation of the integrated FAR-EDGE platform, including an accompanying report. This deliverable reflects the outcome of task T5.3. This is the first of three incremental releases.

FAR-EDGE Portal and Ecosystem Services - M24 release

The implementation of the FAR-EDGE portal and services, including an accompanying report. This deliverable reflects the outcome of tasks T7.2 and T7.3. This is the second of three incremental releases.

FAR-EDGE Portal and Ecosystem Services - M36 release

The implementation of the FAR-EDGE portal and services, including an accompanying report. This deliverable reflects the outcome of tasks T7.2 and T7.3. This is the third of three incremental releases.

FAR-EDGE Portal and Ecosystem Services - M12 release

The implementation of the FAR-EDGE portal and services, including an accompanying report. This deliverable reflects the outcome of tasks T7.2 and T7.3. This is the first of three incremental releases.

Publicaciones

Architectural Design Principles For Industrial Internet of Things

Autores: Hasan Derhamy
Publicado en: 2018, ISBN 978-91-7790-128-0
Editor: LTU

Planning of Edge Computing in Manufacturing

Autores: Jakob Zietsch
Publicado en: 2019
Editor: NA

Distributed Ledger Architecture for Automation, Analytics and Simulation in Industrial Environments

Autores: Mauro Isaja, John K. Soldatos
Publicado en: IFAC-PapersOnLine, Edición 51/11, 2018, Página(s) 370-375, ISSN 2405-8963
Editor: Elsevier Ltd.
DOI: 10.1016/j.ifacol.2018.08.321

A Microservice-based Middleware for the Digital Factory

Autores: Michele Ciavotta, Marino Alge, Silvia Menato, Diego Rovere, Paolo Pedrazzoli
Publicado en: Procedia Manufacturing, Edición 11, 2017, Página(s) 931-938, ISSN 2351-9789
Editor: Elsevier
DOI: 10.1016/j.promfg.2017.07.197

Edge Computing and Blockchains for Flexible and Programmable Analytics in Industrial Automation

Autores: Mauro Isaja, John Soldatos, Nikos Kefalakis, Volkan Gezer
Publicado en: International Journal on Advances in Systems and Measurements, Edición 2 per year, 2018, Página(s) 208-219, ISSN 1942-261x
Editor: IARIA
DOI: 10.5281/zenodo.2624662

Symbiotic Integration of Human Activities in Cyber-Physical Systems

Autores: Paola Fantini, Paulo Leitao, José Barbosa, Marco Taisch
Publicado en: IFAC-PapersOnLine, Edición 52/19, 2019, Página(s) 133-138, ISSN 2405-8963
Editor: IFAC
DOI: 10.1016/j.ifacol.2019.12.124

Identifying the potential of edge computing in factories through mixed reality

Autores: Jakob Zietsch, Lennart Büth, Max Juraschek, Nils Weinert, Sebastian Thiede, Christoph Herrmann
Publicado en: Procedia CIRP, Edición 81, 2019, Página(s) 1095-1100, ISSN 2212-8271
Editor: Elsevier
DOI: 10.1016/j.procir.2019.03.259

Edge Computing and Distributed Ledger Technologies for Flexible Production Lines: A White-Appliances Industry Case

Autores: Pierluigi Petrali, Mauro Isaja, John K. Soldatos
Publicado en: IFAC-PapersOnLine, Edición 51/11, 2018, Página(s) 388-392, ISSN 2405-8963
Editor: Elsevier Ltd.
DOI: 10.1016/j.ifacol.2018.08.324

An Introduction to Edge Computing and A Real-Time Capable Server Architecture

Autores: Volkan Gezer, Jumyung Um, and Martin Ruskowski
Publicado en: International Journal on Advances in Intelligent Systems (IARIA), Vol. 11, No. 1&2, IARIA, 7/2018, 2019, Página(s) 105-114, ISSN 1234-5679
Editor: IARIA

System of System Composition Based on Decentralized Service-Oriented Architecture

Autores: Hasan Derhamy, Jens Eliasson, Jerker Delsing
Publicado en: IEEE Systems Journal, 2019, Página(s) 1-12, ISSN 1932-8184
Editor: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsyst.2019.2894649

Local Cloud Internet of Things Automation: Technology and Business Model Features of Distributed Internet of Things Automation Solutions

Autores: Jerker Delsing
Publicado en: IEEE Industrial Electronics Magazine, Edición 11/4, 2017, Página(s) 8-21, ISSN 1932-4529
Editor: Institute of Electrical and Electoronics Engineers
DOI: 10.1109/MIE.2017.2759342

Combining Edge Computing and Blockchains for Flexibility and Performance in Industrial Automation

Autores: Mauro Isaja, John Soldatos, Volkan Gezer
Publicado en: Proc. UBICOMM 2017, 2017
Editor: IARIA

An Extensible Edge Computing Architecture: Definition, Requirements and Enablers

Autores: Volkan Gezer, Jumyung Um, Martin Ruskowski
Publicado en: Proc. UBICOMM 2017, 2017, ISBN 978-1-61208-598-2
Editor: IARIA

Migration towards digital manufacturing automation — An assessment approach

Autores: Ambra Cala, Arndt Luder, Filippo Boschi, Giacomo Tavola, Marco Taisch
Publicado en: 2018 IEEE Industrial Cyber-Physical Systems (ICPS), 2018, Página(s) 714-719, ISBN 978-1-5386-6531-2
Editor: IEEE
DOI: 10.1109/icphys.2018.8390795

Distributed ledger technology for decentralization of manufacturing processes

Autores: Mauro Isaja, John Soldatos
Publicado en: 2018 IEEE Industrial Cyber-Physical Systems (ICPS), 2018, Página(s) 696-701, ISBN 978-1-5386-6531-2
Editor: IEEE
DOI: 10.1109/icphys.2018.8390792

Protocol interoperability of OPC UA in service oriented architectures

Autores: Hasan Derhamy, Jesper Ronnholm, Jerker Delsing, Jens Eliasson, Jan van Deventer
Publicado en: 2017 IEEE 15th International Conference on Industrial Informatics (INDIN), 2017, Página(s) 44-50, ISBN 978-1-5386-0837-1
Editor: IEEE
DOI: 10.1109/indin.2017.8104744

An Extensible Real Time Capable Server Architecture for Edge Computing

Autores: MARTIN RUSKOWSKI, VOLKAN GEZER
Publicado en: Sixth International Conference on Advances in Computing, Electronics and Communication - ACEC 2017, 2017, Página(s) 71-75, ISBN 978-1-63248-138-2
Editor: Institute of Research Engineers and Doctors
DOI: 10.15224/978-1-63248-138-2-15

A Configurable Distributed Data Analytics Infrastructure for the Industrial Internet of things

Autores: Nikos Kefalakis, Aikaterini Roukounaki, John Soldatos
Publicado en: 2019 15th International Conference on Distributed Computing in Sensor Systems (DCOSS), 2019, Página(s) 179-181, ISBN 978-1-7281-0570-3
Editor: IEEE
DOI: 10.1109/dcoss.2019.00048

Digital Models for Data Analytics and Digital Twins in Industrial Automation Applications

Autores: Nikos Kefalakis, John Kaldis, John Soldatos, Mauro Isaja
Publicado en: The Thirteenth International Conference on Mobile Ubiquitous Computing, Systems, Services and Technologies UBICOMM 2019, 2019, Página(s) 88-91, ISBN 978-1-61208-736-8
Editor: IARIA XPS Press (http://www.xpertps.com/)

Business Case Evaluation Methodology (BCEM) for Factories Digitalization

Autores: Roberto Rocca, Giacomo Tavola, Filippo Boschi, Paola Fantini, Marco Taisch.
Publicado en: The Thirteenth International Conference on Mobile Ubiquitous Computing, Systems, Services and Technologies - UBICOMM 2019, 2019
Editor: XPS (Xpert Publishing Services)

A migration methodology for factories digital transformation

Autores: Roberto Rocca, Filippo Boschi, Ambra Calà, Paola Fantini, Marco Taisch.
Publicado en: Lecture Notes in Networks and Systems, ELEC19 Proceedings, 2019
Editor: Springer

Architectural Blueprint Solution for Migrating Towards FAR-EDGE

Autores: Ambra Calà, Filippo Boschi, Paola Fantini, Giacomo Tavola, Marco Taisch
Publicado en: The Thirteenth International Conference on Mobile Ubiquitous Computing, Systems, Services and Technologies UBICOMM 2019, 2019, ISBN 978-1-61208-736-8
Editor: IARIA XPS Press (http://www.xpertps.com/)

A field study: The perception of edge computing for production industry

Autores: Volkan Gezer, Jakob Zietsch, Nils Weinert, Martin Ruskowski
Publicado en: UBICOMM 2019, 2019
Editor: IARIA

Autonomous production workstation operation, reconfiguration and synchronisation

Autores: Jaime Garcia Represa, Jerker Delsing
Publicado en: Proc. ICPR25, 2019, 2019
Editor: Elsevier

An AAA solution for securing industrial IoT devices using next generation access control

Autores: Katyayani Kiranmayee Kolluru, Cristina Paniagua, Jan van Deventer, Jens Eliasson, Jerker Delsing, Rance J. DeLong
Publicado en: 2018 IEEE Industrial Cyber-Physical Systems (ICPS), 2018, Página(s) 737-742, ISBN 978-1-5386-6531-2
Editor: IEEE
DOI: 10.1109/ICPHYS.2018.8390799

Edge Computing for the Production Industry A Systematic Approach to Enable Decision Support and Planning of Edge

Autores: Jakob Zietsch, Nils Weinert, Christoph Herrmann, Sebastian Thiede
Publicado en: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), 2019, Página(s) 733-739, ISBN 978-1-7281-2927-3
Editor: IEEE
DOI: 10.1109/INDIN41052.2019.8972193

Workflow management for edge driven manufacturing systems

Autores: Hasan Derhamy, Mattias Andersson, Jens Eliasson, Jerker Delsing
Publicado en: 2018 IEEE Industrial Cyber-Physical Systems (ICPS), 2018, Página(s) 774-779, ISBN 978-1-5386-6531-2
Editor: IEEE
DOI: 10.1109/ICPHYS.2018.8390805

In-network processing for context-aware SOA-based manufacturing systems

Autores: Hasan Derhamy, Jens Eliasson, Jerker Delsing, Jan van Deventer
Publicado en: IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, 2017, Página(s) 3460-3465, ISBN 978-1-5386-1127-2
Editor: IEEE
DOI: 10.1109/IECON.2017.8216586

Interoperable meta model for simulation-in-the-loop

Autores: Michele Ciavotta, Andrea Bettoni, Gabriele Izzo
Publicado en: 2018 IEEE Industrial Cyber-Physical Systems (ICPS), 2018, Página(s) 702-707, ISBN 978-1-5386-6531-2
Editor: IEEE
DOI: 10.1109/ICPHYS.2018.8390793

Edge Computing in Smart Production

Autores: Jumyung Um, Volkan Gezer, Achim Wagner, Martin Ruskowski
Publicado en: Advances in Service and Industrial Robotics - Proceedings of the 28th International Conference on Robotics in Alpe-Adria-Danube Region (RAAD 2019), Edición 980, 2020, Página(s) 144-152, ISBN 978-3-030-19647-9
Editor: Springer International Publishing
DOI: 10.1007/978-3-030-19648-6_17

EDGE Computing e Blockchain nel progetto FAR-EDGE DI Whirlpool - Sfide dell'automazione del futuro

Autores: Pierluigi Petrali
Publicado en: Automazione e Strumentazione, Edición Anno LXVII, N 7, 2019, Página(s) 90-92, ISSN 0005-1284
Editor: Fiera Milano Media

The Digital Shopfloor: Industrial Automation in the Industry 4.0 Era Performance Analysis and Application

Autores: John Soldatos - Athens Information Technology Greece Oscar Lazaro - Innovalia Association Spain Franco Cavadini - Synesis-Consortium Italy
Publicado en: The Digital Shopfloor: Industrial Automation in the Industry 4.0 Era Performance Analysis and Application, 2019
Editor: River Publishers Alsbjergvej 10 9260 Gistrup Denmark

Buscando datos de OpenAIRE...

Resultado final

Publicaciones

Compartir esta página Compartir esta página en las redes sociales

Descargar Descargar el contenido de la página