Objetivo
The overall objective of ACASIAS is to contribute to the reduction of energy consumption of future aircraft by improving aerodynamic performance and by facilitating the integration of novel efficient propulsion systems such as contra-rotating open rotor (CROR) engines.
The aerodynamic performance is improved by the conformal and structural integration of antennas. The installation of CROR engines is facilitated by installation of an Active Structural Acoustic Control (ASAC) system in the fuselage. The integration of such a system in fuselage panels will annoying noise in the cabin caused by multi-harmonic sound pressure level which is radiated by CROR engines. CROR engines are able to realize up to 25% fuel and CO2 savings compared to equivalent-technology turbofan engines (http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19890003194.pdf).
The ACASIAS project focuses on challenges posed by the development of aero- structures with multifunctional capabilities. The following concepts structural concepts are considered:
• A composite stiffened ortho-grid fuselage panel for integrating Ku-band SATCOM antenna tiles.
• A fuselage panel with integrated sensors and wiring for reduction of CROR cabin noise.
• A smart winglet with integrated blade antenna (integrated substrates into special foam, partly covered by a 1 mm glass/quartz epoxy layer).
• A Fibre Metal Laminate GLARE panel with integrated VHF communication slot antenna.
The 36 months action with a project cost of 5.8 MEuros will bring together 11 partners from 6 countries covering the three main disciplines required: (composite) structures, advanced antennas and miniaturized sensors in a multi-disciplinary project. The project innovations facilitated by integration of these disciplines, as well as resulting in operational cost reduction and decreased emissions for airlines, will also lead to a more competitive supply chain in the aviation sector, which increasingly uses composite structures.
Ámbito científico
- engineering and technologymechanical engineeringmanufacturing engineering
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringsatellite technology
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraft
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors
- engineering and technologymaterials engineeringcompositescarbon fibers
Programa(s)
Convocatoria de propuestas
Consulte otros proyectos de esta convocatoriaConvocatoria de subcontratación
H2020-MG-2016-Two-Stages
Régimen de financiación
RIA - Research and Innovation actionCoordinador
1059 CM Amsterdam
Países Bajos