European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS

Waste Heat Recovery in Industrial Drying Processes

Descripción del proyecto

Un secado industrial competitivo y respetuoso con el medio ambiente

El secado industrial representa hasta el 25 % del consumo total de energía del sector industrial europeo. Esta energía procede principalmente de la quema de combustibles fósiles, lo que provoca importantes emisiones de carbono y la liberación de otros gases nocivos. Sin embargo, estos procesos también generan una cantidad sustancial de calor residual de baja calidad, que actualmente no se utiliza. El equipo del proyecto DryFiciency, financiado con fondos europeos, pretende desarrollar y demostrar sistemas de bombas de calor industriales de alta temperatura. Con la implantación de estos sistemas, se espera conseguir un ahorro energético de hasta el 80 % en los procesos de secado industrial. El equipo del proyecto permitirá utilizar una bomba de calor de circuito cerrado para los procesos de secado por aire y una bomba de calor de circuito abierto para los procesos de secado por vapor.

Objetivo

The overall objective of the DryFiciency project is to lead energy-intensive sectors of the European manufacturing industry to high energy efficiency and a reduction of fossil carbon emissions by means of waste heat recovery to foster competitiveness, improve security of energy supply and guarantee sustainable production in Europe. The project addresses three sectors, namely brick, waste management and food industry. The results are however of major relevance for a number of other energy-intensive industries such as e.g. pulp and paper industry.
The DryFiciency consortium will elaborate technically and economically viable solutions for upgrading idle waste heat streams to process heat streams at higher temperature levels up to 160 °C. The key elements of the solution are three high temperature vapour compression heat pumps: two closed loop heat pump for air drying processes and one open loop heat pump for steam drying processes. The DryFiciency solution will be demonstrate under real production conditions in operational industrial drying processes in three leading European manufacturing companies from the food, brick and waste management industries.
The potential of the technology demonstrated is to reduce the specific energy demand for drying and dehydration from 700-800 kWh per ton down to 200 kWh per ton of evaporated water. The energy switch from fossil fuels towards heat pump technology reduces the environmental impact considerably and offers at the same time a potential for energy savings of up to 60-80 %. This will lead to substantial reduction of energy costs and consequently lower specific product costs resulting in a significantly improved competitiveness.

Convocatoria de propuestas

H2020-EE-2016-2017

Consulte otros proyectos de esta convocatoria

Convocatoria de subcontratación

H2020-EE-2016-PPP

Régimen de financiación

IA - Innovation action

Coordinador

AIT AUSTRIAN INSTITUTE OF TECHNOLOGY GMBH
Aportación neta de la UEn
€ 1 706 583,80
Dirección
GIEFINGGASSE 4
1210 Wien
Austria

Ver en el mapa

Región
Ostösterreich Wien Wien
Tipo de actividad
Research Organisations
Enlaces
Coste total
€ 1 916 298,75

Participantes (20)